The basic connection process for Sony headphones
Sony headphones connect through Bluetooth, which means you put them in pairing mode, then select them from your device's Bluetooth menu. Most Sony models enter pairing mode when you hold the power button for about three seconds — the light will flash blue and white, or sometimes just blue. Once the light starts flashing, go to your phone, tablet, or computer's Bluetooth settings, find the headphones in the list of available devices, and tap to connect. The headphones will remember your device after the first pairing, so next time you just turn them on and they connect automatically.
The exact button location and hold time varies slightly between Sony models. Some use a dedicated pairing button instead of the power button, and some require you to hold for five seconds rather than three. Check the manual that came with your headphones or the product page on Sony's website for your specific model number — the model is usually printed on the headphones themselves or inside the charging case.
Key Takeaways
- Most Sony headphones enter pairing mode by holding the power button for three to five seconds until the light flashes blue and white.
- Once in pairing mode, open your device's Bluetooth settings and select the headphones from the list of available devices.
- After the first pairing, your headphones will reconnect automatically when you turn them on, as long as Bluetooth is enabled on your device.
- If pairing fails, reset the headphones by holding the power button for ten seconds, then try pairing again from a cleared Bluetooth menu.
- Sony headphones can usually pair with multiple devices, but they only connect to one at a time — you may need to disconnect from one device before connecting to another.
Finding pairing mode on your specific Sony model
Sony makes several headphone lines, and the pairing method is slightly different for each. The WH-1000XM5 and WH-1000XM4 (the noise-cancelling over-ear models) use the power button: hold it for three seconds until you see the blue and white flashing light. The WF-1000XM5 and WF-C700N (the wireless earbuds) also use the button on the case: hold the button on the back of the case for about five seconds until the light flashes. The WH-CH720N (budget over-ear) uses the power button for three seconds.
If you are not sure which model you have, look at the product name on the box or on Sony's support website. You can also search "Sony [model number] pairing" — the model number is usually on a sticker inside the headphones or on the case. Sony's support pages show a video of the pairing process for each model, which is often clearer than reading instructions.
Connecting to phones and tablets
On an iPhone or iPad, go to Settings, tap Bluetooth, make sure it is turned on, then look for your Sony headphones in the list under "Other Devices." Tap the name to connect. On Android, open Settings, go to Connected Devices or Bluetooth (the exact name varies by phone), turn Bluetooth on, and tap your Sony headphones when they appear in the list. Both systems will ask you to confirm the pairing the first time — just tap "Pair" or "Connect" when prompted.
If your headphones do not appear in the list, make sure they are in pairing mode — the light should be flashing. If the light is not flashing, hold the power button again. If they still do not show up, turn Bluetooth off and on again on your phone, then look for the headphones again. Sometimes a device needs a few seconds to detect the headphones after you enable Bluetooth.
Connecting to computers and laptops
On Windows, go to Settings, select Devices, then Bluetooth and Other Devices. Turn Bluetooth on, then click "Add Bluetooth or Other Device" and select Bluetooth. Your Sony headphones should appear in the list within a few seconds — click them to connect. On Mac, open System Preferences, go to Bluetooth, make sure Bluetooth is on, and click your Sony headphones in the list to pair.
Windows and Mac both remember your headphones after the first pairing, so you will not have to go through the settings menu every time. Just turn on your headphones and they will connect automatically if Bluetooth is enabled. If your computer does not see the headphones, restart Bluetooth on your computer by turning it off and on again in the settings menu, then try pairing once more.
What to do if pairing fails or gets stuck
If your Sony headphones will not pair, the first step is to reset them. Hold the power button for about ten seconds — longer than the normal pairing hold — until the light turns off completely. Wait a few seconds, then turn them back on and try pairing again. This clears any stuck connection and usually solves the problem.
If resetting does not work, check that Bluetooth is actually turned on in your device's settings. Some phones and computers have Bluetooth turned off by default or it gets disabled when the battery is low. Also check that your headphones are not already connected to another device — Sony headphones can pair with multiple devices, but they only actively connect to one at a time. If they are connected to your laptop, they will not connect to your phone until you disconnect them from the laptop first. You can usually disconnect by going back to your device's Bluetooth settings and clicking "Forget" or "Unpair" next to the headphones.
Reconnecting after the first pairing
Once your Sony headphones have paired with a device once, they will automatically reconnect every time you turn them on — as long as Bluetooth is enabled on that device. You do not need to go through the pairing process again. Just turn on your headphones and they will show up as connected in your device's Bluetooth menu within a few seconds.
If your headphones do not reconnect automatically, check that Bluetooth is turned on in your device's settings. Also make sure the headphones are fully charged — some Sony models will not connect if the battery is critically low. If they still will not reconnect, forget the device from your headphones' settings (usually by holding a button for several seconds) and pair them again from scratch.
Connecting to multiple devices
Sony headphones can remember multiple devices, which means you can pair them with your phone, tablet, and laptop all at once. However, they can only play audio from one device at a time. When you turn on your headphones, they will try to connect to the last device they were connected to. If you want to switch to a different device, you need to disconnect from the first one.
To switch devices, go to your current device's Bluetooth settings and click "Forget" or "Unpair" next to the headphones. Then go to the new device's Bluetooth settings and select the headphones from the list. They will reconnect when ready since they already remember that device. Some Sony headphones have a button you can press to cycle through paired devices, but most require you to use the Bluetooth menu to switch.
Frequently Asked Questions
Why do my Sony headphones keep disconnecting?
Disconnections usually happen when Bluetooth is turned off on your device, when the headphones are too far from your phone or computer (more than about 30 feet), or when the battery is very low. Move closer to your device and make sure Bluetooth is on. If the problem continues, reset the headphones by holding the power button for ten seconds and pair them again.
Can I pair Sony headphones with two devices at the same time?
Sony headphones can remember multiple devices, but they only connect to one at a time. You can pair them with your phone and your laptop, but when you turn them on they will connect to whichever device they were last used with. To switch, disconnect from the first device in its Bluetooth settings, then select the headphones on the second device.
What if the pairing button is not working?
If the button does not respond, the headphones may be powered off or the battery may be dead. Charge them for at least 15 minutes, then try holding the power button again. If the button still does not work and the headphones will not turn on, they may need to be serviced — contact Sony support with your model number.
Do I need to pair Sony headphones every time I use them?
No. After the first pairing, your headphones will reconnect automatically whenever you turn them on, as long as Bluetooth is enabled on your device. You only need to pair them once per device.
Why are my Sony headphones not showing up in the Bluetooth list?
Make sure the headphones are in pairing mode — the light should be flashing blue and white. If it is not flashing, hold the power button for three to five seconds. Also check that Bluetooth is turned on in your device's settings. If they still do not appear, restart Bluetooth on your device by turning it off and on again.