The simplest way to connect your DVD player to the STR-DH190

Connect your Sony DVD player to the STR-DH190 amplifier using a pair of RCA audio cables — the red and white connectors on the back of both devices. Plug the red cable into the red RCA output on the DVD player and the red RCA input on the amplifier. Do the same with the white cable on the other pair of jacks. Then turn on both devices and select the correct input on the amplifier using the input selector button on the front panel or remote.

The STR-DH190 does not have Bluetooth built in, so a wireless connection is not possible with this model. If your DVD player has an HDMI output, you can use an HDMI-to-RCA converter box as an alternative, but the basic RCA cable method is the most direct route and requires no extra equipment.

Key Takeaways

  • The STR-DH190 amplifier connects to your DVD player using two RCA audio cables plugged into matching red and white jacks on both devices.
  • The STR-DH190 has no Bluetooth capability, so you cannot pair it wirelessly with any DVD player.
  • After connecting the cables, select the correct input on the amplifier's front panel or remote to hear sound from the DVD player.
  • If your DVD player only has HDMI output, you will need a separate HDMI-to-RCA converter box to connect it to the STR-DH190.

Locating the RCA jacks on both devices

On the back of your Sony DVD player, look for a pair of RCA jacks labeled Audio Out or Line Out. These are small round holes — one red, one white. Some DVD players place these on the rear panel; others have them on the side. If your player has multiple output options, the RCA jacks are usually grouped together near the HDMI port.

On the STR-DH190 amplifier, the RCA inputs are on the rear panel in a row of colored jacks. Look for the pair labeled CD, Aux, or Line In. The STR-DH190 has several input pairs — one for a turntable, one for a CD player, and one or more for other sources. You can use any of the available line-level inputs except the one labeled Phono, which is designed only for turntables and will distort audio from other sources.

Step-by-step connection process

Start with both devices powered off. Take your first RCA cable and insert the red connector into the red RCA output jack on the DVD player. Insert the white connector into the white RCA output jack on the same device. Do not mix the colors — red always goes to red, white to white.

Now take the other end of the same cable pair and insert the red connector into a red RCA input jack on the STR-DH190. Insert the white connector into the white jack directly next to it. The two jacks you choose should be part of the same input pair — they will be grouped together on the rear panel. If you are unsure which pair to use, the Aux or Line In input works for any audio source.

Once both cables are seated firmly in their jacks, power on the DVD player first, then the amplifier. Press the input selector button on the front of the amplifier or use the remote to cycle through the available inputs until you reach the one you just connected. The display on the amplifier will show which input is active — look for the label that matches where you plugged in the cables.

Adjusting volume and testing the connection

Start with the amplifier's volume knob set to a low level — around 9 o'clock on the dial. Insert a DVD into your player and press play. You should hear sound through the amplifier's speakers. If you hear nothing, check that the input selector on the amplifier matches the jacks you used, and verify that the DVD player's audio output is not muted or set to a different output mode.

If sound comes through but is very quiet, the DVD player's own volume may be set low. Most DVD players have a separate volume control in their on-screen menu or on the remote. Increase the DVD player's output level, then adjust the amplifier's volume to a comfortable listening level. The amplifier's volume should normally sit between 9 o'clock and 12 o'clock for typical listening.

What to do if you only have HDMI on your DVD player

Some newer Sony DVD players output audio only through HDMI, not through RCA jacks. If your player has no RCA audio outputs, you will need an HDMI-to-RCA converter box — a small device that accepts an HDMI cable from the DVD player and outputs audio through RCA jacks that connect to the amplifier.

Connect the HDMI cable from your DVD player to the input side of the converter box. Connect RCA cables from the converter box's output jacks to the amplifier's input jacks, using the same method described above. Plug the converter box into power — most require a USB power adapter. The converter will automatically detect the HDMI signal and convert it to analog audio, with no setup required.

Why the STR-DH190 has no Bluetooth

The STR-DH190 is a compact, affordable amplifier designed for wired connections only. It has no Bluetooth receiver built in because adding wireless capability would increase the cost and size of the unit. Sony makes other amplifier models with Bluetooth — such as the STR-DN1080 — but the STR-DH190 stays focused on its core function: amplifying audio from wired sources like CD players, turntables, and DVD players.

If you want to add Bluetooth to your setup, you can purchase a separate Bluetooth receiver that connects to one of the amplifier's RCA inputs. This gives you the flexibility to use Bluetooth when you want it without paying for the feature built into the amplifier itself.

Troubleshooting common connection problems

If you connect the cables but hear no sound, first check that you selected the correct input on the amplifier. The input selector button is on the front panel — press it repeatedly until the display shows the input you connected to. If the display shows the right input but you still hear nothing, power off both devices, then check that each RCA connector is pushed firmly into its jack. A loose connection will cut off audio completely.

If you hear sound but it is very distorted or crackling, the RCA cables may be damaged or the connectors may be dirty. Try swapping in a different pair of RCA cables to rule out cable damage. If the problem persists, gently clean the metal connectors on both the cables and the jacks using a dry cloth, then reconnect. Do not use water or liquid cleaners on audio connectors.

If sound comes through only one speaker, check that both the red and white cables are connected on both ends. A missing white cable will result in mono audio from one channel only. Verify that the cables are not reversed — the red cable must go to red jacks on both the DVD player and amplifier.

Frequently Asked Questions

Can I use a single RCA cable instead of two?

No. A single RCA cable carries only one audio channel. Your DVD player outputs stereo audio on two channels — left and right — so you need both the red and white cables to hear the full stereo mix. Using only one cable will result in mono audio from a single speaker.

Does the STR-DH190 work with any DVD player brand?

Yes. The STR-DH190 accepts audio from any DVD player with RCA audio outputs, regardless of brand. Sony, Panasonic, LG, and all other manufacturers use the same standard RCA connectors and audio levels, so the connection process is identical.

What if my DVD player has no audio outputs at all?

This is rare, but if your player outputs audio only through a headphone jack, you can use a 3.5mm-to-RCA adapter cable to connect it to the amplifier. These adapters are inexpensive and available at most electronics retailers. Plug the 3.5mm end into the DVD player's headphone jack and the RCA ends into the amplifier's input jacks.

Can I connect multiple DVD players to the STR-DH190 at the same time?

Yes. The STR-DH190 has multiple input pairs on the rear panel. Connect the first DVD player to one pair of inputs and the second to a different pair. Use the input selector on the amplifier to switch between them. Only one source can play through the speakers at a time, but you can have multiple devices connected and ready to use.

Is it safe to leave the amplifier on all the time?

The STR-DH190 is designed to be left on without risk of damage, but leaving it powered continuously will shorten the lifespan of its internal components and increase your electricity use. It is best practice to turn it off when you are not listening to music or watching movies.