The basic pairing process for Sony headphones

Sony Bluetooth headphones pair the same way most wireless headphones do: you put them in pairing mode, then select them from your device's Bluetooth menu. The difference is in which button you hold and for how long, which varies by Sony model. Most Sony headphones enter pairing mode by holding the power button for 5 to 7 seconds until you see a flashing blue light — not a steady blue, but a blinking one. That blinking light means the headphones are broadcasting their name and waiting for a device to find them.

Once the headphones are in pairing mode, go to your device's Bluetooth settings and look for the headphones' name in the list of available devices. Sony headphones usually appear with a model number like "WH-CH720N" or "WF-C700N". Tap or click that name, and your device will send a pairing request. The headphones will beep or vibrate to confirm, and the light will stop blinking and turn steady blue. That steady light means the pairing is complete and the headphones are connected.

After the first pairing, your device remembers the headphones. The next time you turn on the headphones, they will automatically reconnect to the last device they were paired with — you do not have to go through the pairing menu again. If you want to connect them to a different device, you can usually just select them from that device's Bluetooth menu without re-entering pairing mode.

Key Takeaways

  • Most Sony headphones enter pairing mode by holding the power button for 5 to 7 seconds until the light blinks blue, not steady blue.
  • Once in pairing mode, find the headphones' name in your device's Bluetooth settings and tap it to complete the connection.
  • After the first pairing, the headphones automatically reconnect to that device each time you turn them on.
  • If your headphones do not appear in the Bluetooth list, they may not be in pairing mode — try holding the power button longer or checking your model's manual for the exact timing.
  • Some Sony models have a dedicated pairing button separate from the power button, so check your headphones or manual if the power button method does not work.

Finding the pairing button on your specific Sony model

Sony makes many different headphone styles, and not all of them use the power button to enter pairing mode. Over-ear models like the WH-CH720N and WH-1000XM5 use the power button. True wireless earbuds like the WF-C700N and LinkBuds S also use the power button on one earbud, usually the right one. But some older or budget models have a separate pairing button, often a small recessed button you press with a pin or paperclip.

The fastest way to find out which method your headphones use is to check the manual that came in the box or read it from Sony's support website. Search for your exact model number — you will find it on the bottom or inside of the headphones — and look for "pairing" or "Bluetooth connection" in the manual's table of contents. The manual will show you exactly which button to press and for how long. If you do not have the manual, try the power button method first, since that covers most current Sony models.

What to do if the headphones do not show up in your Bluetooth list

If you held the power button and the light is blinking but the headphones still do not appear in your device's Bluetooth menu, the headphones may be too far away or your device's Bluetooth may be off. Move the headphones within 3 feet of your device and make sure Bluetooth is turned on in your device's settings. On phones, this is usually in Settings > Bluetooth. On computers, it is in System Settings or Control Panel, depending on whether you use Mac or Windows.

If the headphones still do not appear after moving closer and confirming Bluetooth is on, try restarting both the headphones and your device. Turn off the headphones completely, wait 10 seconds, then turn them back on and enter pairing mode again. If you are using a computer, also try turning Bluetooth off and back on in your settings. Sometimes a device's Bluetooth radio needs to reset to see new devices.

If the headphones appear in the list but the connection fails when you tap them, the headphones may already be paired to another device. Sony headphones can only connect to one device at a time, so if they are still paired to a phone or tablet, they will not pair with a new device. Put the headphones back in pairing mode by holding the power button again, which will clear the old connection and let you pair to the new device.

Connecting to a second device without unpairing the first

Sony headphones remember multiple devices, but they only actively connect to one at a time. If you want the headphones to switch between a phone and a computer without going through the pairing menu each time, you can pair them to both devices and then manually switch which one they connect to. Pair the headphones to your phone first using the steps above, then put them back in pairing mode and pair them to your computer. The headphones now know both devices.

When you want to switch from phone to computer, turn off Bluetooth on your phone or move far enough away that the connection drops. Then turn on Bluetooth on your computer, and the headphones will automatically reconnect to it. The next time you turn on Bluetooth on your phone, the headphones will reconnect to the phone instead. This works because the headphones connect to whichever device they see first after losing the previous connection.

If you want to remove a device from the headphones' memory completely — for example, if you sell the phone — you will need to reset the headphones to factory settings. This clears all paired devices. The reset method varies by model, but it usually involves holding the power button for 10 to 15 seconds until you see a specific light pattern. Check your manual for the exact steps, since holding the button too long on some models just turns them off instead of resetting them.

Troubleshooting a connection that keeps dropping

If the headphones pair successfully but then disconnect after a few minutes or disconnect and reconnect repeatedly, the problem is usually interference or distance. Bluetooth operates on the 2.4 GHz frequency, which is also used by Wi-Fi, microwaves, and many other devices. If your headphones keep dropping connection near your Wi-Fi router or microwave, move away from those devices. Even moving 10 feet away can make a difference.

Another common cause is that your device's Bluetooth radio is weak or outdated. Older phones and computers sometimes have older Bluetooth chips that do not work well with newer headphones. If the headphones work fine with another device but drop connection with your computer, the problem is likely your computer's Bluetooth. Try updating your computer's drivers — on Windows, go to Device Manager, find Bluetooth in the list, right-click it, and select "Update driver". On Mac, there is no driver to update, but restarting the computer often helps.

If the headphones drop connection only when you are using a specific app — like a video call or music streaming app — the problem may be that app using too much of your device's processing power. Close other apps running in the background and try again. If the headphones still drop during that one app, try uninstalling and reinstalling the app, or check if there is an updated version available.

Connecting Sony headphones to multiple device types

Sony headphones use standard Bluetooth, so they work with phones, tablets, computers, and even some televisions and gaming consoles. The pairing process is the same across all of them: put the headphones in pairing mode and select them from the device's Bluetooth menu. The main difference is where you find the Bluetooth settings on each device type.

On iPhones and iPads, go to Settings > Bluetooth, make sure Bluetooth is on, and wait for the headphones to appear in the list. On Android phones, go to Settings > Connected Devices > Bluetooth or Settings > Bluetooth, depending on your phone's version. On Windows computers, go to Settings > Devices > Bluetooth & Devices. On Mac, go to System Settings > Bluetooth. On most televisions and gaming consoles, Bluetooth settings are in the main settings menu, often under "Sound" or "Accessories".

One thing to watch: if you pair the headphones to your phone and then try to pair them to your computer while the phone is still nearby with Bluetooth on, the headphones may automatically reconnect to the phone instead of pairing to the computer. To avoid this, either turn off Bluetooth on your phone or move it out of range before pairing the headphones to your computer.

Frequently Asked Questions

How do I know if my Sony headphones are in pairing mode?

The light on the headphones will blink blue, usually once per second. A steady blue light means they are already connected to a device. If you see a red light or no light at all, the headphones may be off or the battery may be dead. Charge them for at least 15 minutes and try again.

Can I pair Sony headphones to multiple devices at the same time?

No, Sony headphones can only play audio from one device at a time. However, they can remember multiple devices and switch between them. Once paired to a device, the headphones will automatically reconnect to it when Bluetooth is turned on, unless they are already connected to a different device.

Why do my headphones keep reconnecting to my old phone instead of my new one?

The headphones are still paired to your old phone and will automatically reconnect to it if it is nearby with Bluetooth on. Turn off Bluetooth on the old phone or move it far away, then turn on Bluetooth on your new phone. The headphones will then connect to the new phone. If you want to remove the old phone permanently, reset the headphones to factory settings.

Do I need to re-pair my Sony headphones every time I turn them on?

No. Once paired, the headphones automatically reconnect to the last device they were connected to each time you turn them on. You only need to go through the pairing menu the first time or when connecting to a new device.

What should I do if my headphones are stuck in pairing mode and will not connect?

Try turning off the headphones completely and waiting 30 seconds, then turning them back on. If that does not work, let the battery drain completely, then charge them fully and try pairing again. If the problem continues, reset the headphones to factory settings using the method in your manual.