The two ways to connect Sonos to a TV
A Sonos speaker can reach your TV in two different ways, and which one works depends on what equipment you have. The first is a direct cable connection from your TV to a Sonos speaker or soundbar — this is the most reliable route and works with almost any TV. The second is wireless pairing over your home network, which is faster to set up but requires both devices to support the same wireless standard and be in range of each other.
The cable route uses an optical audio cable (also called TOSLINK) or an HDMI cable with audio return channel (ARC). The wireless route uses either Bluetooth or your home WiFi network. Most people use the cable method because it's more stable and doesn't depend on your WiFi strength or Bluetooth range.
Key Takeaways
- A wired connection using an optical cable or HDMI ARC is the most reliable way to connect Sonos to your TV and works with nearly every model.
- You need to check your TV's back panel for an optical audio output or HDMI ARC port before you buy a cable or speaker.
- Wireless connection over WiFi requires both your TV and Sonos speaker to support AirPlay 2 or Spotify Connect, which not all models do.
- After connecting the hardware, you may need to change your TV's audio output settings so sound goes to the Sonos speaker instead of the TV's built-in speakers.
Connecting with an optical audio cable
An optical audio cable is the simplest physical connection and works with the widest range of TVs and Sonos speakers. Look at the back of your TV for a port labeled "Optical Out," "Digital Audio Out," or "TOSLINK." Most TVs made in the last 15 years have this port. Plug one end of the optical cable into that port and the other end into the optical input on your Sonos speaker or soundbar.
Once the cable is connected, turn on your TV and go to Settings or Audio settings. Look for an option called "Audio Output," "Speaker Output," or "Sound Output." Change it from "TV Speaker" or "Internal Speaker" to "Optical Out" or "Digital Out." Your TV will now send all sound through the optical cable to the Sonos speaker. You do not need to pair anything wirelessly — the cable handles the connection.
Optical cables are inexpensive (usually $10 to $20) and you can buy them at any electronics store or online. They do not carry video, only audio, so your picture quality is not affected. The main limitation is that the cable has a maximum length of about 30 feet before the signal degrades, so this method works best if your Sonos speaker is reasonably close to your TV.
Connecting with HDMI ARC
HDMI ARC (Audio Return Channel) lets your TV send sound back through an HDMI cable to a Sonos soundbar or speaker. This is useful if your TV is mounted on a wall and running cables behind it, because you can use one HDMI cable instead of a separate optical cable. Not all HDMI ports support ARC — usually only one port on your TV does, often labeled "HDMI 3" or "HDMI 4" or marked with "ARC" next to the port number.
Check your TV's manual or look at the ports on the back to find which HDMI port supports ARC. Plug an HDMI cable into that port and into the HDMI input on your Sonos soundbar. Then go to your TV's audio settings and change the audio output to "HDMI ARC" or "HDMI." Some TVs require you to turn on ARC in the settings menu as well — look for an option called "HDMI ARC" or "eARC" and toggle it on.
HDMI ARC is more convenient than optical if you are already using HDMI cables, but it only works if your Sonos speaker has an HDMI input. Most Sonos soundbars do, but smaller speakers like the Sonos One or Sonos Move do not. Check your speaker's specifications before you buy a cable.
Connecting wirelessly over WiFi
If your TV and Sonos speaker are both on the same WiFi network, you can send audio wirelessly without any cables. This works if your TV supports AirPlay 2 (common on newer Samsung, LG, and Sony TVs) or if both devices support Spotify Connect. Open the Sonos app on your phone, go to Settings, and make sure your speaker is connected to your home WiFi network. Then on your TV, look for an AirPlay or Cast option in the audio or settings menu.
The advantage of WiFi is that you do not need any cables and the connection is faster than Bluetooth. The disadvantage is that not all TVs support it — you need to check your TV's manual or settings to see if AirPlay 2 is available. If your TV does not support AirPlay 2, you cannot use this method. WiFi also depends on your home network being stable; if your WiFi drops, the audio will cut out.
Some newer Sonos speakers also support Spotify Connect, which means you can play Spotify directly from your TV to the speaker if your TV has a Spotify app. This is not the same as sending all TV audio to the speaker — it only works for Spotify. For regular TV shows and movies, you still need optical, HDMI ARC, or AirPlay 2.
Connecting with Bluetooth
Most Sonos speakers support Bluetooth, but it is usually not the best choice for a TV connection because Bluetooth has a shorter range and lower audio quality than wired or WiFi connections. If you want to try it, put your Sonos speaker in pairing mode by pressing the Bluetooth button on the back or using the Sonos app. Then go to your TV's Bluetooth settings, search for available devices, and select your Sonos speaker from the list.
Bluetooth works best if your speaker is in the same room as your TV and within about 30 feet. If your TV is in a different room or the speaker is far away, the connection will drop frequently. Bluetooth also has a slight delay (called latency), which means the sound may not match the picture perfectly — you might notice the actor's lips moving before you hear the words. For these reasons, a wired connection is almost always better if your TV supports it.
Troubleshooting a connection that is not working
If you connected the cable but hear no sound, first check that the cable is fully plugged in on both ends. Then go back to your TV's audio settings and make sure the output is set to the correct port — "Optical Out" for optical cables or "HDMI ARC" for HDMI. Some TVs have a setting that defaults back to the TV speaker after you restart, so you may need to change it again.
If you are using WiFi or Bluetooth and the connection keeps dropping, move the speaker closer to your TV or router. Check that both devices are on the same WiFi network by opening the Sonos app and looking at the speaker's network status. If the speaker shows a different network than your TV, disconnect the speaker from WiFi and reconnect it to the correct network. Restart both your TV and Sonos speaker by unplugging them for 30 seconds, then plugging them back in.
If you still hear no sound after checking all of this, test the speaker with your phone or another device to make sure it is working. Play music through the Sonos app to confirm the speaker itself is not broken. If the speaker works with your phone but not your TV, the problem is with the connection between the TV and speaker, not the speaker itself.
Frequently Asked Questions
Can I use Sonos with any TV?
Yes, if your TV has an optical audio output or HDMI ARC port, you can connect any Sonos speaker with a wired cable. If you want to use WiFi or Bluetooth, your TV needs to support those standards, which not all older TVs do. Check your TV's manual or back panel to see what audio outputs it has.
Do I need the Sonos app to connect my speaker to my TV?
For a wired connection, no — you only need to plug in the cable and change your TV's audio settings. For WiFi or Bluetooth, you may need the Sonos app to put the speaker in pairing mode or to confirm it is on the correct network, but once it is paired, the connection works without the app.
Why is my Sonos speaker not showing up in my TV's Bluetooth list?
Make sure the speaker is in pairing mode — most Sonos speakers require you to press and hold the Bluetooth button on the back for a few seconds until a light blinks. If the light does not blink, the speaker may not support Bluetooth, or the battery may be low. Check your speaker's manual to confirm it has Bluetooth.
Can I connect multiple Sonos speakers to my TV at the same time?
With a wired connection, you can only connect one speaker directly to your TV's audio output. If you want sound in multiple rooms, you can group speakers together in the Sonos app so they all play the same audio, but you still need a wired connection from the TV to one speaker, and that speaker sends the signal to the others over WiFi.
What if my TV does not have an optical port or HDMI ARC?
Older TVs sometimes only have a headphone jack or RCA audio outputs instead of optical. You can buy an adapter that converts RCA or headphone output to optical, but these are less reliable than a direct optical connection. Bluetooth is your most straightforward option if your TV does not have optical or HDMI ARC.