The basic connection process

The Logitech Slim Folio pairs to your iPad through Bluetooth, which means you turn on the keyboard, put your iPad in pairing mode, and select the keyboard from the list that appears. The whole process takes about two minutes and you only do it once — after that, the keyboard reconnects automatically when you turn it on near your iPad.

Before you start, make sure your iPad is charged to at least 20 percent and your Slim Folio has a battery. Most Slim Folios charge via USB-C or Lightning (depending on the model), and a full charge takes roughly two hours. If the keyboard has been sitting unused for months, plug it in for 30 minutes before you try to pair it.

Key Takeaways

  • Turn on the Slim Folio by pressing the power button for three seconds until you see a light, then open Settings on your iPad and go to Bluetooth to find and select the keyboard.
  • The keyboard name appears as "Logitech Slim Folio" or similar in your iPad's Bluetooth list — if you see nothing after 30 seconds, restart the keyboard and try again.
  • Once paired, the keyboard reconnects on its own each time you turn it on, so you will not need to repeat the pairing steps.
  • If the keyboard stops responding after pairing, toggle Bluetooth off and on in Settings, or restart both devices and reconnect.

Turning on the keyboard and finding the power button

The power button on a Slim Folio is usually a small switch or button on the edge of the keyboard, often near the USB charging port. Look for a symbol that looks like a circle with a line at the top — that is the standard power symbol. Press and hold it for about three seconds until you see a light on the keyboard turn on or blink. If nothing happens after five seconds, the battery may be completely empty and you will need to charge it first.

Once the light comes on, the keyboard is in pairing mode and will stay that way for about two minutes. This is the window during which your iPad can find it. If the light goes out before you finish the next steps, press the power button again to restart pairing mode.

Opening Bluetooth settings on your iPad

On your iPad, open the Settings app — it is the gray icon with gears that usually sits on your home screen or in the app library. Tap Settings, then look for the word "Bluetooth" in the left-hand menu. Tap it. Your iPad will start searching for nearby Bluetooth devices.

You should see "Bluetooth" at the top with a toggle switch next to it. Make sure that toggle is turned on (it will be blue or green when on). Below that, you will see a section called "Other Devices" or just a list of available devices. The Slim Folio should appear in this list within 10 to 15 seconds, usually labeled "Logitech Slim Folio" or "Slim Folio Pro" depending on your model.

Selecting the keyboard from the Bluetooth list

When you see the Logitech Slim Folio name appear in the Bluetooth list, tap it once. Your iPad will attempt to connect. You may see a spinning circle or the word "Connecting" appear next to the keyboard name — this is normal and takes about 5 to 10 seconds.

Once connected, the name will show "Connected" underneath it, and the light on the keyboard will usually stop blinking and stay steady. At this point, you can close the Settings app and start typing. The keyboard is now paired to your iPad and will remember this pairing.

What to do if the keyboard does not appear in the list

If 30 seconds pass and you still do not see the Logitech Slim Folio in the Bluetooth list, restart the keyboard. Press the power button to turn it off completely, wait five seconds, then press it again to turn it back on. The light should come on again, and the keyboard should reappear in your iPad's Bluetooth list within 10 seconds.

If it still does not show up, try restarting your iPad. Hold the top button and one of the volume buttons together until you see "Slide to Power Off," then slide to shut down. Wait 10 seconds, then press the top button again to turn it back on. Once your iPad restarts, go back to Bluetooth settings and try pairing again.

If the keyboard still will not appear after two restart attempts, the battery may be too low to pair. Plug the keyboard into a charger for at least 30 minutes, then try again. A completely drained battery sometimes needs time to recover before the keyboard can enter pairing mode.

Reconnecting after the first time

After your first pairing, you will not need to go through the Bluetooth settings again. straightforward turn on the keyboard by pressing the power button for three seconds. Within a few seconds, it will automatically reconnect to your iPad — you will see the light on the keyboard steady, and you can start typing right away.

If the keyboard does not reconnect automatically, open Settings, go to Bluetooth, and check whether the keyboard still shows as "Connected." If it shows as "Not Connected," tap the keyboard name once to reconnect. If the keyboard is not in the list at all, turn it off and on again, and it should reappear within 10 seconds.

Fixing common problems after pairing

If the keyboard was working but suddenly stops responding, the first step is to toggle Bluetooth off and on. Go to Settings, tap Bluetooth, and turn the toggle off (it will turn gray). Wait five seconds, then turn it back on. The keyboard should reconnect within 10 seconds.

If that does not work, turn off the keyboard completely by pressing the power button for three seconds, wait 10 seconds, then turn it back on. This resets the connection without affecting the pairing itself. You should not have to go through the full pairing process again.

If the keyboard still does not respond after these steps, check the battery level. A keyboard running on very low battery sometimes loses connection. Plug it in and let it charge for 15 minutes, then try turning it on again.

Frequently Asked Questions

Can I pair the Slim Folio to multiple iPads?

Yes. The keyboard will remember the pairing with your first iPad, but you can pair it to a second iPad by going through the same pairing steps on that device. When you turn on the keyboard near either iPad, it will reconnect to whichever device it was last paired with. To switch between devices, turn the keyboard off, then turn it on near the other iPad.

Why does the keyboard light keep blinking after I pair it?

A steady light means the keyboard is connected and ready to use. A blinking light usually means the keyboard is searching for a device or has low battery. If it keeps blinking after you see "Connected" in Bluetooth settings, try turning the keyboard off and on again. If the light blinks constantly and the keyboard does not respond, charge it for 30 minutes.

Do I need to unpair the keyboard before I sell or give away my iPad?

It is a good idea to remove the pairing before handing over your device. Go to Settings, tap Bluetooth, find the Logitech Slim Folio in the list, and tap the "i" icon next to it, then tap "Forget This Device." This removes the pairing from your iPad so the new owner starts fresh.

What if my Slim Folio model uses Lightning instead of USB-C?

The pairing steps are identical regardless of the charging port. The only difference is which cable you use to charge it. Look for a Lightning cable if your keyboard has a Lightning port, or a USB-C cable if it has USB-C. The pairing process itself works the same way on all Slim Folio models.