The basic steps for pairing Skullcandy earbuds

Most Skullcandy earbuds pair the same way: turn them on, hold the button until the light blinks, then select them from your device's Bluetooth menu. The exact button and how long you hold it depends on your model — some use a dedicated pairing button on the case, others use the power button on the earbud itself. Check the manual or the Skullcandy website for your specific model number to know which one.

Once the earbuds are in pairing mode (usually shown by a blinking light), open your phone or computer's Bluetooth settings, look for your earbuds' name in the list of available devices, and tap or click to connect. The first time you pair takes a few extra seconds; after that, the earbuds will reconnect automatically when you turn them on and your device is nearby.

Key Takeaways

  • Put your Skullcandy earbuds into pairing mode by pressing and holding the designated button until the light blinks — the button location and hold time vary by model.
  • Open your device's Bluetooth settings, find your earbuds in the available devices list, and select them to complete the pairing.
  • After the first pairing, your earbuds will reconnect automatically when turned on, as long as Bluetooth is enabled on your device.
  • If your earbuds do not appear in the Bluetooth list, reset them by holding the button longer (usually 10 to 15 seconds) and try again.
  • You can pair most Skullcandy earbuds with multiple devices, but they will only connect to one at a time.

Finding the pairing button on your Skullcandy model

The location of the pairing button depends on which Skullcandy earbuds you own. Some models, like the Skullcandy Dime and Dime 2, have a small button on the charging case itself. Others, like the Skullcandy Crusher ANC, have the pairing button on the right earbud. A few models use the power button for pairing — you press and hold it until you see a specific light pattern.

The quickest way to find the right button is to look at the manual that came with your earbuds or visit the Skullcandy support page and search for your model number. The model number is usually printed on the charging case or inside the case lid. Once you know which button to use, the pairing process is the same across all models.

Pairing with an iPhone or iPad

On an iPhone or iPad, go to Settings, tap Bluetooth, and make sure it is turned on. Put your Skullcandy earbuds into pairing mode. Your earbuds should appear in the list under "Other Devices" within a few seconds. Tap the name of your earbuds to connect. Once paired, they will show under "My Devices" with a connected status.

If your earbuds do not show up in the list, make sure they are fully charged and try putting them back into pairing mode. Hold the pairing button longer than you think you need to — most models require 5 to 10 seconds of continuous pressure. If they still do not appear, restart your iPhone's Bluetooth by turning it off and back on in Settings.

Pairing with an Android phone

On Android, open Settings, go to Connected Devices or Bluetooth (the exact name varies by phone brand), and turn Bluetooth on. Put your Skullcandy earbuds into pairing mode. They should appear in the list of available devices. Tap the name to pair. Once connected, they will show as a paired device with a connected status.

Android phones sometimes take longer to discover new Bluetooth devices than iPhones do. If your earbuds do not appear after 10 seconds, try holding the pairing button for a full 15 seconds. You can also try "forgetting" the earbuds if they have been paired before — go to your Bluetooth settings, find the earbuds in the paired devices list, and select "Forget" or "Unpair", then pair them again from scratch.

Pairing with a Windows or Mac computer

On Windows, go to Settings, select Devices, then Bluetooth & other devices, and turn Bluetooth on. Put your earbuds into pairing mode. Click "Add Bluetooth or other device", select Bluetooth, and wait for your earbuds to appear in the list. Click them to connect.

On Mac, open System Preferences (or System Settings on newer versions), go to Bluetooth, and make sure it is on. Put your earbuds into pairing mode. Your earbuds should appear in the list on the left side of the window. Click "Connect" next to them. Once paired, they will show as connected in the same menu.

What to do if your earbuds will not pair

If your Skullcandy earbuds do not appear in your device's Bluetooth list, the most common fix is a full reset. Hold the pairing button for 10 to 15 seconds — longer than the normal pairing hold — until you see the light flash a specific pattern (usually red and blue alternating). This clears the earbud's memory and puts it back into factory pairing mode. Then try pairing again from your device's Bluetooth settings.

Make sure your earbuds have enough battery. If the battery is very low, they may not have the power to enter pairing mode or stay discoverable. Charge them for at least 15 minutes before trying again. Also check that your device's Bluetooth is actually turned on — it is straightforward to miss if you are looking at the wrong settings menu.

If you have paired these earbuds with another device before, your phone or computer might be trying to reconnect to that other device instead of entering pairing mode. Forget the earbuds from all your other devices first, then try pairing with your current device. You can pair most Skullcandy earbuds with multiple devices, but they will only actively connect to one at a time.

Reconnecting after the first pairing

After you have paired your Skullcandy earbuds once, you do not need to go through the full pairing process again. straightforward turn on your earbuds and turn on Bluetooth on your device. The earbuds will automatically reconnect to the last device they were paired with, as long as that device is nearby and Bluetooth is enabled.

If your earbuds connect to the wrong device (for example, your old phone instead of your new one), you can manually select them from the Bluetooth menu. Open your Bluetooth settings, find your earbuds in the list of paired devices, and tap or click to connect. They will stay connected to that device until you manually switch them to another one or turn off Bluetooth.

Frequently Asked Questions

How do I know if my Skullcandy earbuds are in pairing mode?

Most Skullcandy earbuds show a blinking light when in pairing mode — usually blue, white, or a combination of colors. Some models blink slowly at first, then faster. Check your manual for the exact light pattern for your model. If you do not see any light, the battery may be too low, or you may not have held the button long enough.

Can I pair my Skullcandy earbuds with two devices at the same time?

Most Skullcandy earbuds can be paired with multiple devices, but they will only connect to one at a time. You can switch which device they are connected to by selecting them from the Bluetooth menu on a different device. Some newer models support multipoint pairing, which lets them stay connected to two devices simultaneously — check your manual to see if yours does.

Why do my earbuds keep disconnecting from my phone?

Disconnections usually happen because your phone and earbuds are too far apart, something is blocking the Bluetooth signal, or the battery is running low. Try moving closer to your phone and away from walls or metal objects. If the problem continues, forget the earbuds from your phone's Bluetooth settings and pair them again from scratch.

Do I need to put my earbuds back in pairing mode every time I use them?

No. After the first pairing, straightforward turn on your earbuds and enable Bluetooth on your device. They will reconnect automatically. You only need to enter pairing mode again if you are pairing with a new device or if you reset the earbuds.

What if I lost the manual for my Skullcandy earbuds?

Visit the Skullcandy website and search for your model number (printed on the case). You can read the manual as a PDF, which will show you exactly which button to press and how long to hold it for pairing mode. If you cannot find your model number, contact Skullcandy support with a photo of your earbuds.