The basic steps to pair Shokz headphones with Windows or Mac
Turn on your Shokz headphones by holding the power button for three seconds until you see a blue light or hear a tone. Put them into pairing mode by holding the power button again for another five seconds — you'll hear a voice prompt saying "pairing mode" or see the light flash blue and red alternately. On your computer, open Bluetooth settings, look for your Shokz model name in the available devices list, and click to connect. The headphones will confirm the connection with a tone.
The exact steps differ slightly between Windows and Mac, but the core idea is the same: your Shokz headphones broadcast a signal, your computer listens for it, and they agree to talk to each other. Once paired once, your computer will remember the headphones and reconnect automatically the next time you turn them on — as long as Bluetooth is enabled on both devices.
Key Takeaways
- Shokz headphones enter pairing mode when you hold the power button for five seconds after turning them on, shown by a flashing blue and red light.
- On Windows, open Settings > Devices > Bluetooth and select your Shokz model from the list; on Mac, go to System Preferences > Bluetooth and do the same.
- Once paired, your computer remembers the headphones and reconnects automatically when both devices have Bluetooth turned on.
- If your headphones don't appear in the Bluetooth list, turn them off and on again, make sure they're still in pairing mode, and check that your computer's Bluetooth is actually enabled.
Pairing on Windows 10 and Windows 11
Click the Windows Start button and type "Bluetooth settings" into the search box, then open the Bluetooth & devices page. Make sure the Bluetooth toggle at the top is switched on. Your Shokz headphones should appear in the list below as "Shokz [model name]" — if they don't, go back and confirm they're in pairing mode (the flashing blue and red light).
Click on your Shokz headphones in the list. Windows will ask you to confirm the pairing. Once you see "Connected" next to the device name, you're done. If Windows asks for a PIN code, try entering 0000 or 1234 — Shokz headphones typically don't require a PIN, so this usually means the pairing didn't fully complete. Turn the headphones off, wait five seconds, and start over.
Pairing on Mac
Click the Apple menu in the top left corner and select System Preferences (or System Settings on newer Macs). Look for Bluetooth in the sidebar and click it. Make sure Bluetooth is turned on — you'll see a toggle switch at the top. Your Shokz headphones should appear in the list of available devices.
Click the "Connect" button next to your Shokz model name. Mac will show a brief confirmation, and the headphones will move from the "Available" section to the "My Devices" section. You're now paired. If the headphones don't show up, make sure they're in pairing mode (flashing blue and red light) and try clicking "Scan" or waiting a few seconds for Mac to refresh the list.
What to do if your headphones won't show up in the Bluetooth list
The most common reason Shokz headphones don't appear is that they're not actually in pairing mode. Turn them completely off by holding the power button for three seconds until the light goes out. Wait five seconds. Then hold the power button for five seconds — not three — until you hear the pairing mode voice prompt or see the light flashing blue and red. This is different from just turning them on, and it's straightforward to mix up.
If they still don't appear, check that your computer's Bluetooth is actually on. On Windows, look at the taskbar in the bottom right corner — you should see a Bluetooth icon. On Mac, look at the menu bar in the top right. If you don't see the icon, Bluetooth may be disabled. Also try moving your headphones closer to your computer — Bluetooth has a range of about 30 feet, but interference from walls or other devices can reduce that.
If you've paired these headphones with another device recently (a phone, tablet, or different computer), they may still be trying to connect to that device instead. Turn off Bluetooth on any other devices nearby, or go into those devices' Bluetooth settings and "forget" the Shokz headphones. Then try pairing with your computer again.
Reconnecting after the first pairing
After you've paired your Shokz headphones once, you don't need to go through pairing mode again. straightforward turn on the headphones and make sure Bluetooth is enabled on your computer. The headphones will automatically reconnect to the last device they were paired with. You'll hear a tone confirming the connection.
If your headphones connect to a different device instead (like your phone), you'll need to manually select them in your computer's Bluetooth settings. On Windows, open Bluetooth settings and click your Shokz headphones. On Mac, open Bluetooth preferences and click "Connect" next to the headphones. After you do this a few times, your computer may learn to prioritize the connection, but this varies by model.
Troubleshooting audio that cuts out or won't play
If your Shokz headphones are paired but you hear nothing, check that they're actually set as your audio output device. On Windows, right-click the speaker icon in the taskbar, select "Open Volume mixer," and look for your Shokz headphones in the list. If they're there but grayed out, click them to make them active. On Mac, click the speaker icon in the menu bar and select your Shokz headphones from the dropdown.
If audio cuts out frequently, move closer to your computer — Bluetooth can be disrupted by distance, walls, or other wireless devices like microwaves or Wi-Fi routers. You can also try unpairing and re-pairing the headphones. On Windows, go to Bluetooth settings, click your Shokz headphones, and select "Remove device." On Mac, click the X next to the headphones in Bluetooth preferences. Then put the headphones back in pairing mode and pair them again from scratch.
Using Shokz with multiple computers
Shokz headphones can be paired with multiple computers at the same time, but they can only actively connect to one device at a time. Once you've paired them with your first computer, you can pair them with a second computer by putting them back into pairing mode and following the same steps. The headphones will remember both computers.
When you turn on the headphones, they'll try to reconnect to whichever computer they were last connected to. If you want to switch to a different computer, turn off Bluetooth on the first computer or move out of range, then the headphones will connect to the second one. Some Shokz models have a button to manually switch between paired devices, but most require you to manage this through your computer's Bluetooth settings.
Frequently Asked Questions
Why do my Shokz headphones keep disconnecting from my computer?
Disconnections usually happen when your computer goes to sleep or when Bluetooth is turned off. Check that your computer's power settings aren't putting it to sleep too quickly — on Windows, go to Settings > System > Power & sleep and increase the timeout. Also make sure Bluetooth stays on when your computer sleeps. If disconnections happen randomly, try moving closer to your computer or unpairing and re-pairing the headphones.
Can I use Shokz headphones with both my computer and phone at the same time?
No — Shokz headphones can only play audio from one device at a time. If you want to switch between your computer and phone, you'll need to manually disconnect from one and reconnect to the other through Bluetooth settings. Some newer Shokz models have a multipoint feature that lets them stay paired to two devices and switch between them automatically, but this depends on your specific model.
What if I forgot which computer I paired my Shokz headphones with?
Put the headphones in pairing mode and check which computer they try to connect to automatically — that's the last device they were paired with. If you want to pair them with a different computer instead, just put them in pairing mode and follow the pairing steps on the new computer. The headphones will remember both devices, and you can manage which one they connect to through each computer's Bluetooth settings.
Do I need to read software or drivers for Shokz headphones on my computer?
No — Shokz headphones work with standard Bluetooth and don't require special drivers or software on Windows or Mac. They'll work as soon as they're paired. Shokz does offer an optional app for some models that lets you adjust settings like EQ or firmware updates, but this is not necessary for basic pairing and audio playback.