The basic pairing process for Shokz headphones
Shokz headphones pair the same way most Bluetooth devices do: you turn on pairing mode on the headphones, then search for them on your phone or computer. The difference is that Shokz headphones use bone conduction instead of speakers in your ears, so the physical setup feels different even though the pairing steps are identical. Once paired, they reconnect automatically when you turn them on near a device you've already connected them to.
Most Shokz models pair in under two minutes. The headphones have a single button or a combination of button presses that set up pairing mode — usually indicated by a flashing light or a voice prompt saying "pairing mode". Your phone or computer then detects them in the Bluetooth settings and you confirm the connection. After that first time, you won't need to repeat these steps unless you reset the headphones or pair them with a new device.
Key Takeaways
- Turn on your Shokz headphones and hold the power button for about 5 to 10 seconds until you see a flashing light or hear a voice prompt indicating pairing mode.
- Open Bluetooth settings on your phone or computer, search for available devices, and select "Shokz" or the specific model name from the list.
- Confirm the pairing when prompted — some devices ask you to enter a PIN, which is usually 0000 for Shokz headphones.
- Once paired, your Shokz headphones will reconnect automatically when you turn them on and have Bluetooth enabled on your device.
- If pairing fails, restart both the headphones and your device, then try again from the beginning.
Pairing Shokz headphones with an iPhone or iPad
Open the Settings app on your iPhone or iPad and tap Bluetooth. Make sure Bluetooth is turned on — the toggle at the top should be green. Then turn on your Shokz headphones by pressing and holding the power button (usually on the left side) for 5 to 10 seconds. You should see a flashing blue light or hear a voice saying "pairing mode". Your headphones will now appear in the list under "Other Devices" on your iPhone.
Tap the Shokz headphones name in the list. Your iPhone may ask you to confirm the pairing or enter a PIN — if so, type 0000. Once you see the headphones listed under "My Devices" with a blue Bluetooth icon next to the name, the pairing is complete. Your iPhone will remember these headphones and connect to them automatically the next time you turn them on.
Pairing Shokz headphones with an Android phone
Go to Settings on your Android phone and find Bluetooth — the exact location varies by phone brand, but it's usually under "Connected devices" or "Connections". Turn Bluetooth on if it isn't already. Then power on your Shokz headphones by holding the power button for 5 to 10 seconds until you see a flashing light or hear the pairing mode announcement.
Your Android phone will scan for nearby Bluetooth devices. When you see your Shokz headphones in the list, tap them to connect. If the phone asks for a PIN, enter 0000. Once the headphones show as "Connected" in your Bluetooth settings, you're done. The next time you turn on the headphones with Bluetooth enabled on your phone, they'll connect without any additional steps.
Pairing Shokz headphones with a Windows computer
Click the Windows Start button and go to Settings. Select "Devices" and then "Bluetooth and other devices". Make sure Bluetooth is turned on — you should see a toggle switch at the top. Turn on your Shokz headphones by holding the power button for 5 to 10 seconds until the pairing light flashes. Click "Add Bluetooth or other device" in the Windows settings window.
Select "Bluetooth" from the options that appear. Windows will search for nearby devices and your Shokz headphones should show up in the list within 10 to 15 seconds. Click on them to pair. Windows may ask you to confirm the pairing or enter a PIN — use 0000 if prompted. Once the headphones appear in your Bluetooth device list with a "Connected" status, the pairing is finished.
Pairing Shokz headphones with a Mac
Click the Apple menu in the top-left corner and select "System Preferences" (or "System Settings" on newer Macs). Find "Bluetooth" in the list and click it. Make sure Bluetooth is turned on. Turn on your Shokz headphones by pressing and holding the power button for 5 to 10 seconds until you see the flashing pairing light.
Your Mac will automatically scan for Bluetooth devices. When your Shokz headphones appear in the device list, click "Connect" next to them. If your Mac asks for a PIN, enter 0000. Once the headphones show as "Connected" in the Bluetooth settings, you're finished. They'll reconnect automatically whenever you turn them on with Bluetooth enabled on your Mac.
What to do if your Shokz headphones won't pair
The most common reason pairing fails is that the headphones aren't actually in pairing mode. Make sure you're holding the power button long enough — usually 5 to 10 seconds — and that you see a flashing light or hear a voice prompt. If the light is solid blue instead of flashing, the headphones are already connected to another device. You may need to unpair them from that device first or reset the headphones entirely.
If you've confirmed pairing mode is active and your device still doesn't see the headphones, restart both the headphones and your phone or computer. Turn off the headphones completely, wait 10 seconds, and turn them back on. Then restart your device's Bluetooth by turning it off and on again in settings. Try pairing one more time from the beginning. If this still doesn't work, you may need to reset the headphones to factory settings — check the manual for your specific Shokz model, as the reset process varies.
Connecting to a second device or switching between devices
Shokz headphones can be paired to multiple devices at once, but they can only play audio from one device at a time. Once you've paired them with your phone, you can pair the same headphones with your computer or tablet using the same steps — just make sure the headphones are in pairing mode again. Your phone won't "forget" the headphones; they'll stay paired to both devices.
To switch between devices, straightforward stop the audio on the first device and start audio on the second. The headphones will automatically switch to whichever device is playing sound. If both devices are trying to play audio at the same time, the headphones will prioritize the one that connected most recently. If you want to completely unpair the headphones from a device, go to that device's Bluetooth settings, find the Shokz headphones in the list, and select "Forget" or "Remove".
Frequently Asked Questions
Why do my Shokz headphones keep disconnecting?
Disconnections usually happen when your phone or computer moves too far from the headphones — Bluetooth typically works within 30 feet. They can also disconnect if another Bluetooth device is interfering or if the battery is very low. Try moving closer to your device, turning off other nearby Bluetooth devices, and charging the headphones. If disconnections continue, restart both the headphones and your phone or computer.
Can I pair my Shokz headphones with two phones at the same time?
Yes, you can pair them with multiple phones, but they'll only play audio from one at a time. Whichever phone starts playing sound first will take priority. If you want to switch to the other phone, pause the audio on the first phone and start it on the second. The headphones will automatically switch over.
What if I forgot which device my Shokz headphones are paired to?
Reset the headphones to factory settings — the process varies by model, but usually involves holding the power button for 10 to 15 seconds until you hear a reset confirmation. This erases all previous pairings. Then pair them fresh with whichever device you want to use them with first.
Do I need to pair my Shokz headphones every time I use them?
No. Once you've paired them once, they'll reconnect automatically whenever you turn them on and your phone or computer has Bluetooth enabled. You only need to go through the pairing steps once per device, or if you reset the headphones.
Why is my device asking for a PIN when I try to pair?
Some phones and computers require a PIN for security during Bluetooth pairing. For Shokz headphones, the PIN is almost always 0000. If that doesn't work, check your headphones' manual for the specific model, as some older Shokz models may use a different PIN.