The PS5 controller works on Windows and Mac through Bluetooth or USB cable
The PlayStation 5 controller (DualSense) pairs with a computer the same way any Bluetooth device does — your computer discovers it, you confirm the pairing, and they stay connected. You can use either a USB cable for a wired connection or Bluetooth wireless. Most games and programs recognize the controller when ready once it's connected, though some older software may need configuration.
The USB cable method is fastest if you're sitting at your desk. Bluetooth is better if you want to move around the room. Both work equally well for gaming — the choice depends on your setup and whether you want to charge the controller at the same time.
Key Takeaways
- Connect via USB cable by plugging the controller into your computer with a USB-C cable; Windows and Mac recognize it when ready without extra software.
- For Bluetooth, hold the PlayStation and Create buttons together for three seconds until the light bar flashes, then search for "Wireless Controller" in your computer's Bluetooth settings.
- Windows may show the controller as "Wireless Controller" in Bluetooth settings but as "PS5 Controller" in games, which is normal.
- Most modern games work right away, but older games or software may need you to map the buttons manually or install a driver.
Connecting with a USB cable (wired)
Plug a USB-C cable into the port on the bottom of the controller and the other end into any USB port on your computer. Windows and Mac both recognize the DualSense when ready — you don't need to install anything. The controller will work in games and programs right away, and it will charge while connected.
This method is the most reliable because there's no wireless connection to drop or interfere. It's also the fastest way to start playing. The only downside is the cable limits how far you can sit from your computer.
Connecting via Bluetooth (wireless)
Put the controller in pairing mode by holding down the PlayStation button (the large center button) and the Create button (to the left of the touchpad) at the same time for about three seconds. The light bar on the back of the controller will flash white, which means it's searching for a device to pair with.
On Windows, open Settings, go to Bluetooth & devices, and click "Add device." Select Bluetooth, and you should see "Wireless Controller" appear in the list within a few seconds. Click it to pair. On Mac, open System Settings, go to Bluetooth, and look for "Wireless Controller" in the list of available devices. Click it to pair.
Once paired, the light bar will stop flashing and stay solid. Your computer will remember the controller, so you won't need to pair it again — just hold the PlayStation button to turn it on and it will connect automatically.
What to do if the controller doesn't appear in Bluetooth settings
Make sure the controller is actually in pairing mode — the light bar should be flashing white, not solid or off. If it's not flashing, try the button combination again. Wait at least five seconds before searching for it on your computer.
If the controller still doesn't show up, restart Bluetooth on your computer by turning it off and back on. On Windows, go to Settings > Bluetooth & devices and toggle Bluetooth off, wait a few seconds, then toggle it back on. On Mac, click the Bluetooth icon in the menu bar and select "Turn Bluetooth Off," then turn it back on.
If you've paired the controller before and it's not connecting now, "forget" it from your Bluetooth settings and pair it again from scratch. On Windows, go to Settings > Bluetooth & devices, find "Wireless Controller" in the paired devices list, click it, and select "Remove device." On Mac, open System Settings > Bluetooth, find the controller, click the X next to it, and confirm removal.
Setting up the controller in games and software
Most modern games for Windows and Mac recognize the PS5 controller automatically and map the buttons correctly. You can start playing right away. Some games may show button prompts using PlayStation symbols (triangle, circle, square, X) while others show Xbox-style prompts — both are normal and the controller works the same way.
Older games or software that doesn't recognize the controller may need manual setup. In the game's settings or control options, look for a section called "Controller," "Gamepad," or "Input." You may need to select "DualSense" or "PlayStation" from a list, or manually assign each button by pressing it when the game prompts you.
If a game doesn't recognize the controller at all, try connecting it with the USB cable instead of Bluetooth. Some older software only works with wired connections. You can also check the game's documentation or support page to see if it lists PS5 controller support.
Charging the controller on your computer
If you're connected via USB cable, the controller charges while you play or while your computer is on. The light bar will show the battery level — it pulses orange when charging and turns off when fully charged.
If you're using Bluetooth, the controller won't charge through your computer. You'll need to plug it in with a USB cable when the battery runs low, or use a separate USB-C charger. The DualSense battery typically lasts 8 to 12 hours of play depending on the features you're using (the haptic feedback and adaptive triggers drain the battery faster than standard vibration).
Troubleshooting connection drops and lag
Bluetooth connections can drop if your computer is far from the controller or if there's interference from other wireless devices. Move closer to your computer or remove other Bluetooth devices from the area. Walls and metal objects can also weaken the signal, so try moving to a clearer line of sight.
If the connection keeps dropping, switch to a USB cable instead. Wired connections are more stable and eliminate wireless interference entirely. If you're using Bluetooth and the controller feels sluggish or unresponsive, the battery may be low — charge it and try again.
On Windows, if the controller connects but games don't recognize it, open Device Manager (right-click the Start button and select "Device Manager"), find "Wireless Controller" under "Human Interface Devices," right-click it, and select "Update driver." This refreshes the connection and often fixes recognition issues.
Frequently Asked Questions
Can I use a PS5 controller on Mac?
Yes, both wired and Bluetooth connections work on Mac. Plug in a USB-C cable or pair via Bluetooth the same way as Windows. Most games for Mac recognize the controller automatically, though some older titles may need manual button mapping in the game's settings.
Do I need to install software or drivers?
No. Windows and Mac both recognize the PS5 controller without extra software. If a game doesn't recognize it, you may need to map the buttons in that game's settings, but you don't need to read anything to your computer.
Can I use multiple PS5 controllers on one computer?
Yes. Connect or pair each controller one at a time, and your computer will remember all of them. Games that support multiple controllers will detect each one separately. This works for both wired and Bluetooth connections.
Why does my controller show as "Wireless Controller" instead of "PS5 Controller"?
That's normal. Windows and Mac call it "Wireless Controller" in Bluetooth settings, but games and programs often display it as "PS5 Controller" or "DualSense." It's the same device with different names in different places.
What if the game only recognizes Xbox controllers?
Some games are built specifically for Xbox controllers and won't recognize PlayStation controllers. You can try third-party software like DS4Windows or Rewasd that translates PS5 controller input to Xbox format, but this adds complexity. For those games, an Xbox controller is the simpler choice.