Pairing Your Pencil Pro: The Basic Steps
To connect an Apple Pencil Pro to your iPad, turn on Bluetooth in your iPad's settings, hold the Pencil Pro near the top of the iPad, and tap "Connect" when the pairing prompt appears on your screen. The entire process takes about 30 seconds and happens only once — after that, your Pencil Pro reconnects automatically whenever both devices are nearby.
The Pencil Pro uses Bluetooth Low Energy, which means it draws very little power from its built-in battery. Once paired, your iPad remembers the connection and re-establishes it in the background without you doing anything. You do not need to manually turn the Pencil on or off.
If you have never paired a Bluetooth device to your iPad before, the pairing screen may look unfamiliar. The iPad is straightforward asking your permission to connect — it is the same process you would use to pair wireless headphones or a keyboard, just with a stylus instead.
Key Takeaways
- Pairing happens once by holding the Pencil Pro near your iPad and tapping "Connect" when prompted, and takes about 30 seconds.
- Your iPad automatically reconnects to the Pencil Pro whenever both devices are in range, so you do not need to pair again.
- The Pencil Pro battery lasts weeks between charges because Bluetooth Low Energy uses minimal power.
- If pairing fails, restart your iPad and try again, or check that your Pencil Pro battery is not completely empty.
What to Do If Pairing Does Not Work
If the pairing prompt does not appear after holding the Pencil Pro near your iPad, first check that Bluetooth is actually turned on. Go to Settings > Bluetooth on your iPad and look for the toggle switch at the top — it should be green. If Bluetooth is off, tap it to turn it on, then hold the Pencil Pro near the top of your iPad again.
If Bluetooth is already on and the prompt still does not appear, restart your iPad. Press and hold the power button until you see "Slide to Power Off", slide to shut down, wait 10 seconds, then press the power button again to turn it back on. Once the iPad restarts, try pairing the Pencil Pro again.
A completely dead Pencil Pro battery can also prevent pairing. Plug the Pencil Pro into power using its USB-C cable and wait at least 15 minutes before trying to pair again. You do not need to charge it fully — even a partial charge is enough for the Bluetooth handshake to work.
Checking Your Pairing and Battery Status
Once your Pencil Pro is paired, you can see its battery level in your iPad's Control Center. Swipe down from the top-right corner of your screen (or up from the bottom on older iPad models) to open Control Center, and look for the Pencil Pro battery indicator. It shows a percentage and updates in real time as you use the stylus.
You can also check battery status in Settings > Bluetooth. Tap the information icon next to "Apple Pencil Pro" in the list of connected devices, and you will see the current charge level. This view also shows you the date the Pencil Pro was last connected, which is useful if you are troubleshooting a connection problem.
Unpairing Your Pencil Pro and Pairing It to a Different iPad
If you want to use your Pencil Pro with a different iPad, you do not need to unpair it from the first one — you can pair it to multiple iPads and it will work with whichever one is nearby. The Pencil Pro remembers up to five paired devices and automatically connects to the closest one.
If you do want to remove the pairing from a specific iPad, go to Settings > Bluetooth, find "Apple Pencil Pro" in the list, tap the information icon, and select "Forget This Device". The Pencil Pro will no longer connect to that iPad automatically. To pair it again later, repeat the original pairing steps.
If you are selling or giving away your iPad, forgetting the Pencil Pro is a good security step — it prevents someone else from using your stylus with your old device. However, the Pencil Pro itself does not store any personal information, so there is no privacy risk if you skip this step.
Why Your Pencil Pro Might Disconnect During Use
If your Pencil Pro stops responding while you are drawing or writing, the most common cause is that Bluetooth has temporarily lost the connection. This usually happens if you move the iPad and Pencil Pro far apart (more than 30 feet) or if there is heavy radio interference in your area. Moving closer to your iPad or restarting Bluetooth usually fixes it.
A low battery can also cause disconnections. If your Pencil Pro battery drops below 5 percent, the connection becomes unstable. Check the battery level in Control Center — if it is very low, plug in the Pencil Pro and wait a few minutes before using it again.
In rare cases, a software bug can cause the connection to drop. If disconnections happen repeatedly even after restarting your iPad and charging your Pencil Pro, check the App Store for iPad updates. Apple regularly releases software fixes that improve Bluetooth stability, and installing the latest version often solves persistent connection problems.
Pairing a Pencil Pro You Just Bought
A brand-new Pencil Pro comes with some battery charge but not a full one. Before pairing, you can use it right away — the battery is sufficient for the initial connection. However, it is a good idea to charge it fully before your first real work session. Plug it into a USB-C power adapter using the cable that came in the box, and let it charge for about an hour.
While the Pencil Pro is charging, you can go ahead and pair it to your iPad. The pairing process works the same way whether the battery is at 20 percent or 100 percent. Once pairing is complete and the Pencil Pro is fully charged, you are ready to use it for drawing, note-taking, or any other task your apps support.
Frequently Asked Questions
Can I use my Pencil Pro with an older iPad that does not support it?
No. The Pencil Pro only works with iPad Pro models from 2024 onward, iPad Air from 2024 onward, and iPad (7th generation) and later. If your iPad is older than that, it will not recognize the Pencil Pro at all, and the pairing prompt will never appear. Check your iPad model in Settings > General > About to confirm compatibility.
Do I need to unpair my Pencil Pro before charging it?
No. You can charge your Pencil Pro while it is paired to your iPad, and you can even use it while it is plugged in. The USB-C cable is short, so you will be working close to the power adapter, but there is no technical reason to unpair first.
What happens if I pair my Pencil Pro to multiple iPads?
Your Pencil Pro can be paired to up to five iPads at the same time. It automatically connects to whichever iPad is closest and in range. If you pick up a different iPad, the Pencil Pro will disconnect from the first one and connect to the second one within a few seconds. You do not need to do anything manually.
Can someone else use my Pencil Pro if they have my iPad?
Yes. Once your Pencil Pro is paired to your iPad, anyone with that iPad can use the stylus. The Pencil Pro does not have a password or lock, so there is no way to restrict it to a single user. If you want to prevent someone from using your Pencil Pro, you would need to unpair it or keep it physically separate from the iPad.
Why does my Pencil Pro take a long time to charge?
The Pencil Pro charges slowly by design — it uses a low-power charging circuit to protect the battery and extend its lifespan. A full charge takes about two hours from empty. If charging seems to take much longer than that, check that you are using a proper USB-C power adapter (at least 5 watts) and that the cable is not damaged.