The two ways to pair an Onn remote

An Onn remote connects to your TV in one of two ways: infrared (IR), which requires line of sight and no pairing at all, or Bluetooth, which pairs once and then works through walls. Most Onn remotes sold today are Bluetooth. If your remote came with batteries already installed and works when ready when you point it at the TV, it is infrared — you are done, no pairing needed. If it does not work right away, or if you bought it separately, follow the pairing steps below for Bluetooth.

The difference matters because Bluetooth remotes need a one-time setup, while IR remotes do not. Bluetooth also lets you control the TV from another room, while IR requires a clear line between the remote and the TV's sensor.

Key Takeaways

  • Onn infrared remotes work when ready without pairing; Bluetooth remotes require a one-time pairing step through your TV's settings menu.
  • To pair a Bluetooth Onn remote, go to your TV's Settings, find Bluetooth or Remote settings, put the remote in pairing mode by holding the pairing button for three seconds, and select it from the list.
  • If pairing fails, replace the remote's batteries, restart the TV, and try again — most failures are dead batteries or the TV being too far away.
  • Infrared remotes work without setup but need a direct line of sight; Bluetooth remotes work through walls but drain batteries faster.

How to pair a Bluetooth Onn remote to your TV

Start by turning on your TV and going to the Settings menu. On most Onn TVs, press the home button on any working remote or use the TV's physical buttons to navigate to Settings. Look for a section called Remote, Bluetooth, Accessories, or Pair Remote — the exact name depends on your TV model and when it was made.

Once you find the pairing menu, select the option to add or pair a new remote. Your TV will enter pairing mode and usually display a message on screen. Now pick up your Onn remote, locate the small pairing button on the back or underside (it is often recessed and may require a paperclip or pen to press), and hold it for three seconds. The remote's light will flash or change color to show it is in pairing mode. Within a few seconds, your TV should detect the remote and show its name on screen — select it to complete pairing.

Test the remote by pressing a few buttons. If it controls the TV, pairing worked. If nothing happens, move to the troubleshooting section below.

What to do if the remote does not pair

The most common reason a Bluetooth remote fails to pair is dead or dying batteries. Remove the battery cover on the back of the remote, take out both batteries, and replace them with fresh ones. Reinsert them with the correct polarity — the + side should face the direction marked inside the battery compartment. This alone fixes the problem about half the time.

If new batteries do not work, restart your TV completely. Unplug it from the wall outlet, wait 30 seconds, and plug it back in. Once it boots up, go back to the pairing menu and try again. Sometimes the TV's Bluetooth radio needs a fresh start.

If the remote still does not pair, make sure you are close to the TV — within 10 feet — and that there are no large metal objects or other Bluetooth devices between them. Microwaves and cordless phones can interfere. Also check that your TV's Bluetooth is actually turned on; some models have a setting to disable it. If you have an older Onn TV, it may not support Bluetooth pairing at all, in which case an infrared remote is your only option.

Infrared remotes and why they work without pairing

Infrared remotes send a signal as light, not radio waves. Your TV's sensor receives that light directly, so there is nothing to pair. This is why older remotes and many budget models work straight out of the box. The downside is that infrared requires a clear line of sight — if you point the remote at the ceiling or if something blocks the TV's sensor, it will not work.

If you have an infrared Onn remote and it stopped working, first check that the TV's infrared sensor is not blocked by a soundbar, cabinet, or other object. Then replace the batteries. If it still does not work, the remote itself may be broken — infrared LEDs can fail, and there is no way to repair them. A replacement Onn remote costs between $15 and $30 depending on the model.

Choosing between Bluetooth and infrared for your setup

Bluetooth remotes are better if you want to control the TV from another room, if your TV sits in a cabinet or behind glass, or if you move around while watching. They also feel more modern and often have more buttons. The trade-off is that they drain batteries faster — expect to replace them every few months instead of every year or two.

Infrared remotes are simpler and use less power, but they need a direct line to the TV's sensor. If your TV is mounted high on a wall or sits inside a closed entertainment center, infrared becomes frustrating. Most people with a choice prefer Bluetooth, but infrared is fine if your TV is in an open, accessible spot.

Pairing a second or replacement Onn remote

If you already have one Onn remote paired and want to add another, the process is the same. Go to Settings, find the Bluetooth or Remote menu, and select the option to add another remote. Put the new remote in pairing mode by holding the pairing button for three seconds, and select it from the list. Most Onn TVs support multiple remotes at once, so both will work.

If you are replacing a broken remote with a new one, you may need to unpair the old one first. Look for a "Remove Remote" or "Forget Remote" option in the same menu. Select the old remote from the list and remove it, then pair the new one using the steps above.

Why your Onn remote might stop working after pairing

A remote that paired successfully but then stopped working is usually a battery problem. Replace the batteries first, even if they seem fine. Onn remotes are sensitive to low voltage, and a battery that reads as "working" on a tester can still be too weak to pair or send a signal reliably.

If new batteries do not fix it, the remote may have drifted out of pairing range. This is rare but happens if the TV's Bluetooth radio was reset or if the remote was paired to a different device. Unpair the remote from your TV's settings, then pair it again from scratch. If the remote still does not work after that, it may be physically damaged — check for cracks, water damage, or buttons that stick. If you see damage, replacement is usually the only option.

Frequently Asked Questions

Do I need to pair an Onn infrared remote?

No. Infrared remotes work when ready without any setup because they send a light signal directly to the TV's sensor. If your remote came with batteries and works right away, it is infrared and requires no pairing.

Can I use an Onn remote with a non-Onn TV?

Infrared Onn remotes sometimes work with other TV brands because infrared codes are often shared across manufacturers. Bluetooth Onn remotes will not pair with non-Onn TVs because the pairing protocol is specific to Onn. Test an infrared remote on your TV; if it does not work, you will need a remote made for that brand.

What if my TV does not have a pairing button or Bluetooth menu?

Your TV may be too old to support Bluetooth pairing. Check your TV's manual or the model number on the back to confirm the year it was made. If it does not have Bluetooth, use an infrared remote instead, or consider a universal remote that works with your TV model.

How long do batteries last in an Onn Bluetooth remote?

Bluetooth remotes typically use batteries for two to four months of regular use, depending on how often you use them. Infrared remotes last longer — usually six months to a year — because infrared uses less power. Replace batteries as soon as the remote stops responding reliably.

Can I pair my Onn remote to multiple TVs?

A Bluetooth remote can only be paired to one TV at a time. If you want to use it on a different TV, you must unpair it from the first TV and then pair it to the second. Infrared remotes work on any TV without pairing, so they can be used on multiple TVs in the same room.