The basic steps to pair your Magic Keyboard
Turn on your Magic Keyboard by sliding the power switch on the back toward the green dot. On your Mac, open System Settings, then click Bluetooth in the sidebar. Your Magic Keyboard should appear in the list of available devices within a few seconds. Click it, then click Connect. Your Mac will confirm the pairing is complete.
The whole process takes about 30 seconds. Once paired, your keyboard will reconnect automatically whenever it's in range and powered on — you won't need to pair it again unless you reset the keyboard or remove it from your Mac's Bluetooth settings.
If your keyboard doesn't appear in the Bluetooth list, make sure the power switch is fully on (you should see a green indicator), and that your Mac's Bluetooth is actually enabled. If Bluetooth is off, clicking it in System Settings will turn it on.
Key Takeaways
- Slide the power switch on the back of your Magic Keyboard toward the green dot to turn it on.
- Open System Settings on your Mac, click Bluetooth, and select your keyboard from the available devices list.
- Once paired, your keyboard reconnects automatically — you only pair it once unless you reset the keyboard.
- If your keyboard doesn't show up, check that the power switch is fully on and your Mac's Bluetooth is enabled.
- A successful pairing takes about 30 seconds and requires no password or PIN entry.
What to do if your keyboard doesn't appear in the Bluetooth list
First, check the battery. Open System Settings, click Bluetooth, then look for your keyboard's name in the list. If it's there but shows as "Not Connected," click it and select Connect. If the keyboard still doesn't appear at all, the battery may be too low — plug it into a USB-C cable and let it charge for at least 15 minutes, then try again.
If charging doesn't help, restart your Mac. Shut down completely, wait 10 seconds, then power back on. Once your Mac is fully booted, turn on your keyboard and check the Bluetooth list again. Restarting clears temporary Bluetooth connection issues that sometimes prevent devices from being discovered.
If your keyboard still won't appear after charging and restarting, try resetting the keyboard itself. Slide the power switch off, wait 5 seconds, then slide it back on. Some keyboards also have a small reset button on the bottom — check your keyboard's manual if you have it. After resetting, repeat the pairing steps from the beginning.
Reconnecting a keyboard that was previously paired
If you've already paired your Magic Keyboard to your Mac before, it should reconnect automatically. Turn on the keyboard, and within a few seconds it will connect without any action needed from you. You'll see the keyboard's name appear in the Bluetooth menu with a "Connected" status.
If it doesn't reconnect automatically, open System Settings, click Bluetooth, find your keyboard in the list, and click Connect. This is faster than initial pairing because your Mac already knows the keyboard — it just needs to establish the connection again.
Pairing the same keyboard to multiple Macs
A single Magic Keyboard can be paired to more than one Mac, but it can only connect to one at a time. To pair it to a second Mac, turn on the keyboard and follow the initial pairing steps on that Mac — open System Settings, click Bluetooth, select the keyboard, and click Connect.
When you want to switch which Mac the keyboard is connected to, turn off the keyboard, turn it back on near the Mac you want to use it with, and it will connect to that Mac instead. You don't need to unpair it from the first Mac — just moving the keyboard to the other Mac and powering it on will make it reconnect there.
If you want to completely remove the keyboard from a Mac's Bluetooth list, open System Settings, click Bluetooth, find the keyboard, click the X or settings icon next to it, and select Remove. This is useful if you're selling the Mac or giving the keyboard to someone else.
Understanding battery status and charging
Your Magic Keyboard's battery level appears in the Bluetooth menu on your Mac. Open System Settings, click Bluetooth, and look next to your keyboard's name — it will show a percentage. When the battery drops below 10 percent, your Mac will send you a notification.
Charge your keyboard by connecting it to a power source with a USB-C cable. Most Magic Keyboards take about 2 hours to fully charge from empty. You can use the keyboard while it's charging — the connection won't drop. A full charge typically lasts several months of normal use, depending on how often you type.
If your keyboard dies completely, plug it in and wait at least 15 minutes before trying to turn it on. Keyboards sometimes need a few minutes of charging before they have enough power to respond to the power switch.
Why your keyboard might disconnect unexpectedly
Bluetooth range is typically 30 feet, but walls, metal objects, and other wireless devices can reduce that. If your keyboard keeps disconnecting, try moving your Mac and keyboard closer together, or moving them away from other electronics like routers, microwaves, or wireless speakers.
Interference from other Bluetooth devices can also cause disconnections. If you have multiple Bluetooth devices connected to your Mac at once — headphones, a mouse, a trackpad — try disconnecting the ones you're not using. Open System Settings, click Bluetooth, find the device, and click the X next to it.
If disconnections happen only in certain locations, the problem is likely interference from something in that environment. If they happen everywhere, your keyboard's battery may be low, or there may be a software issue on your Mac. Try charging the keyboard fully, then restarting your Mac.
Switching between Magic Keyboard and other input devices
You can pair multiple keyboards and mice to your Mac at the same time. To switch which keyboard you're using, straightforward disconnect the one you're not using and make sure the one you want is connected. Open System Settings, click Bluetooth, and click the X next to any keyboard you want to disconnect.
If you use both a Magic Keyboard and a Magic Trackpad, they can both be connected at the same time — your Mac will accept input from whichever one you use. You only need to manage connections if you're switching between different keyboards or if you want to save battery by disconnecting devices you're not using.
Frequently Asked Questions
Do I need to enter a PIN or password to pair my Magic Keyboard?
No. Magic Keyboards pair without any PIN or password entry. If your Mac asks you for a code, something has gone wrong — disconnect and try the pairing process again from the beginning.
Can I use my Magic Keyboard with an older Mac?
Magic Keyboards work with any Mac that has Bluetooth and runs macOS 10.12 or later. Check your Mac's Bluetooth capability by opening System Settings and looking for Bluetooth in the sidebar. If it's there, your Mac can pair with a Magic Keyboard.
What should I do if my keyboard pairs but the keys don't work?
First, make sure the keyboard is actually connected — check System Settings and confirm it shows "Connected" next to the keyboard's name. If it's connected but keys aren't working, try disconnecting and reconnecting it. If that doesn't help, restart your Mac. If keys still don't work after restarting, the keyboard may have a hardware problem.
Will my Magic Keyboard work if my Mac's Bluetooth is turned off?
No. Your Mac's Bluetooth must be on for the keyboard to connect. If you turn off Bluetooth to save battery, you'll need to turn it back on and reconnect the keyboard. Some Macs allow you to turn Bluetooth on and off from the menu bar for quick access.
How do I know if my Magic Keyboard is fully charged?
Open System Settings, click Bluetooth, and look at the percentage next to your keyboard's name. When it reaches 100 percent, the keyboard is fully charged. You can unplug it at any time — there's no risk of overcharging.