The basic steps to pair a Logitech mouse

Turn on your Logitech mouse by flipping the power switch on the bottom to the On position. On your MacBook, go to System Settings (or System Preferences on older versions), then click Bluetooth in the sidebar. Make sure Bluetooth is turned on — you'll see the Bluetooth icon light up in the menu bar at the top of your screen.

Put your Logitech mouse into pairing mode. Most Logitech mice have a small button on the bottom or side; hold it for three to five seconds until you see a light blink on and off. Your mouse will now appear in the Bluetooth list on your MacBook. Click the mouse name and then click Connect. Your MacBook will confirm the connection, and you're done.

If your mouse doesn't appear in the list after 30 seconds, try holding the pairing button again for a full five seconds. Some Logitech models require a longer press. If it still doesn't show up, restart Bluetooth on your MacBook by toggling it off and back on in System Settings.

Key Takeaways

  • Turn on your Logitech mouse and open Bluetooth in System Settings on your MacBook.
  • Press and hold the pairing button on the bottom of your mouse for three to five seconds until the light blinks.
  • Click your mouse's name in the Bluetooth list and select Connect.
  • If the mouse doesn't appear, restart Bluetooth on your MacBook and try the pairing button again.

Where the pairing button is on different Logitech models

The pairing button location varies by model. On the Logitech MX Master and MX Anywhere series, it's a small button on the bottom of the mouse near the power switch. On the Logitech M705 and M510, the button is also on the bottom. Some older Logitech wireless mice have the button on the side instead.

Check the underside of your mouse first — that's where Logitech puts it most often. If you don't see a button, look at the sides and the back. Your mouse's model number is usually printed on the bottom as well, so you can search "[your model number] pairing button" if you're unsure.

What to do if your mouse connects but won't respond

If your MacBook shows the mouse as connected but the cursor doesn't move, the mouse may have lost power or the connection may have dropped. First, check that the power switch on the bottom is set to On and that the batteries aren't dead. Replace the batteries if they're more than a few months old.

Next, disconnect the mouse from Bluetooth and reconnect it. Go to System Settings, click Bluetooth, find your mouse in the list, click the X or Remove button next to it, and then repeat the pairing steps above. This forces your MacBook to re-establish the connection from scratch, which often fixes responsiveness problems.

If the cursor still doesn't move after reconnecting, restart your MacBook. A restart clears out Bluetooth connection issues that sometimes get stuck in the system. After your MacBook restarts, the mouse should reconnect automatically if it's still in pairing mode.

Switching a Logitech mouse between devices

Many Logitech mice can pair with multiple devices at once, but they can only control one at a time. If you want to use your mouse with a different MacBook or another device, you don't need to unpair it from the first one — just turn the mouse off and then turn it back on near the new device. The mouse will reconnect to whichever device it was last paired with.

If your mouse doesn't automatically connect to the new device, put it back into pairing mode by holding the pairing button for three to five seconds, then follow the pairing steps on the new MacBook. Your mouse will now be paired with both devices and will switch between them based on which one it's closest to and which one is actively using it.

Why your mouse might not appear in the Bluetooth list

If your Logitech mouse doesn't show up in the Bluetooth list on your MacBook, the most common reason is that the mouse is not actually in pairing mode. The pairing button needs a firm, deliberate press — a quick tap won't work. Hold it down for the full five seconds and watch for the light to blink. If the light doesn't blink, try again.

Another reason is that your mouse's batteries are dead or nearly dead. Logitech mice won't enter pairing mode if the battery is too low to transmit a signal. Replace the batteries with fresh ones and try again. A third possibility is that your MacBook's Bluetooth is off or not working. Toggle Bluetooth off and back on in System Settings, wait 10 seconds, and then try pairing the mouse again.

If you've tried all of these steps and the mouse still doesn't appear, restart your MacBook entirely. Bluetooth sometimes gets stuck and won't discover new devices until the system restarts. After the restart, turn on the mouse, put it in pairing mode, and try again.

Using your Logitech mouse after it's paired

Once your mouse is paired and connected, you can adjust its settings in System Settings. Go to System Settings, click Trackpad or Mouse (depending on your macOS version), and you'll find options to change the cursor speed, scrolling direction, and which button is primary. These settings explore to your Logitech mouse just as they do to the MacBook's built-in trackpad.

Your mouse will stay connected as long as it's powered on and within about 30 feet of your MacBook. If you move farther away or turn the mouse off, the connection will drop, but your MacBook will remember the pairing. The next time you turn the mouse back on, it will reconnect automatically without needing to pair again.

Frequently Asked Questions

Do I need to install software to use a Logitech mouse with my MacBook?

No. Basic mouse functions work when ready after pairing — the cursor will move and clicks will register. Logitech does offer a free app called Logi Options+ that lets you customize buttons and adjust sensitivity, but it's not required for the mouse to work.

Why does my mouse keep disconnecting from my MacBook?

The most common cause is low battery power. Replace the batteries and see if the disconnections stop. If they continue, try unpairing the mouse completely and pairing it again from scratch. Interference from other wireless devices can also cause drops — move your mouse closer to your MacBook or move other wireless devices farther away.

Can I use a Logitech mouse with multiple MacBooks at the same time?

Your mouse can be paired with multiple MacBooks, but it will only control one at a time. To switch which MacBook it's controlling, turn the mouse off and back on near the MacBook you want to use. It will reconnect to whichever device it was last paired with.

What if my Logitech mouse is already paired but I want to pair it with a different MacBook?

You don't need to unpair it from the old MacBook. Just turn the mouse off, turn it back on near the new MacBook, and it will connect to the new device. If it doesn't connect automatically, hold the pairing button for five seconds and follow the pairing steps on the new MacBook.

How do I know if my mouse is in pairing mode?

The light on your mouse will blink on and off when it's in pairing mode. If the light is steady or off, the mouse is not in pairing mode. Hold the pairing button for a full five seconds — a quick tap won't work — and watch for the blinking light to appear.