The three ways to pair a keyboard with your iPad
You can connect a keyboard to your iPad using Bluetooth (wireless), a USB-C cable (wired), or a Smart Connector if your iPad model has one. Bluetooth is the most common method and works with nearly every iPad made in the last ten years. A USB-C cable works if your iPad has a USB-C port and you have a compatible keyboard. The Smart Connector is a physical slot on certain iPad Pro and iPad Air models that lets you attach a keyboard without pairing at all — it just clicks in and works when ready.
Which method you use depends on what keyboard you own and what iPad model you have. If you already have a keyboard, check whether it says "Bluetooth" on the box or manual. If it's an older keyboard with a 30-pin connector or Lightning port, it will only work with iPads from that same era. Most keyboards sold today are Bluetooth, which means they work with any iPad from roughly 2014 onward.
Key Takeaways
- Bluetooth keyboards pair through Settings > Bluetooth on your iPad and work with most models made since 2014.
- You only pair a keyboard once; after that, it reconnects automatically when you turn it on near your iPad.
- If pairing fails, restart both the keyboard and iPad, then try again from the Bluetooth menu.
- USB-C keyboards work only on iPads with USB-C ports (iPad Pro 2018 and later, iPad Air 2022 and later, iPad 2024 and later).
- Smart Connector keyboards work only on iPad Pro and iPad Air models that have the three-pin slot on the edge.
Pairing a Bluetooth keyboard step by step
Turn on your keyboard first. Most Bluetooth keyboards have a power switch or button on the back or side. Hold it for two to three seconds until you see a light blink or flash — that means the keyboard is in pairing mode and looking for a device to connect to. This usually lasts about two minutes, so move quickly to the next step.
On your iPad, open Settings and tap Bluetooth. Make sure Bluetooth is turned on (the toggle at the top should be green). Wait a few seconds and your keyboard should appear in the list under "Other Devices." Tap the keyboard's name. Your iPad will show a four-digit code on the screen. Type that code on the keyboard and press Enter. The keyboard will now appear under "My Devices" with "Connected" next to its name.
Once paired, your keyboard will reconnect automatically whenever you turn it on near your iPad. You do not need to pair it again unless you reset the keyboard, reset your iPad, or pair the keyboard with a different device.
What to do if the keyboard won't pair
If the keyboard does not appear in the Bluetooth list, the keyboard may not be in pairing mode. Turn the keyboard off completely, wait five seconds, then turn it back on and hold the pairing button for three to five seconds. Some keyboards require a longer hold than others. Check the keyboard's manual for the exact pairing button and how long to hold it.
If the keyboard appears but the pairing code does not work, restart both devices. Turn off the keyboard, then go to Settings > General > Shut Down on your iPad and wait 30 seconds before turning it back on. Then repeat the pairing steps. If the keyboard still will not pair, try "forgetting" it first: go to Settings > Bluetooth, find the keyboard in the list, tap the info icon next to it, and tap "Forget This Device." Then try pairing again from the beginning.
If you see the pairing code but typing it does not work, the keyboard may not have a working connection to its battery. Replace the batteries (if it uses them) or charge the keyboard fully, then try again. Some keyboards also have a reset button on the bottom or back — consult the manual to find it and hold it for ten seconds, then try pairing once more.
Using a USB-C keyboard with newer iPads
If your iPad has a USB-C port, you can plug in a USB-C keyboard directly without pairing. iPad Pro models from 2018 onward, iPad Air from 2022 onward, and the standard iPad from 2024 onward all have USB-C. Plug the keyboard into the USB-C port on the bottom of your iPad. The keyboard should work when ready — no pairing needed.
USB-C keyboards do not drain your iPad's battery the way Bluetooth keyboards do, because they draw power from the iPad itself. However, using a wired keyboard means you cannot move your iPad far from the keyboard without unplugging it. Most people use USB-C keyboards when the iPad is sitting on a desk or table.
Connecting a Smart Connector keyboard
Smart Connector keyboards only work with iPad Pro (all sizes from 2015 onward) and iPad Air (2013 and later). These keyboards have a three-pin connector on the back that slides into a matching slot on the edge of your iPad. No pairing, no charging, and no batteries needed — the iPad powers the keyboard through the connector.
To attach a Smart Connector keyboard, align the three pins on the keyboard with the three-pin slot on the edge of your iPad. Slide the keyboard toward the iPad until it clicks into place. The keyboard is now ready to use. To remove it, slide it away from the iPad. Smart Connector keyboards are usually more expensive than Bluetooth keyboards, but they are lighter and require no setup.
Typing and using keyboard shortcuts on iPad
Once your keyboard is connected, you can type in any app that accepts text — email, notes, documents, search boxes, and so on. The iPad's on-screen keyboard will disappear automatically when a physical keyboard is connected. If you want to bring it back, tap the keyboard icon in the bottom right corner of the screen.
iPad supports many keyboard shortcuts that work the same way as on a computer. Press Command (⌘) and the spacebar to switch between apps. Press Command and Tab to see all open apps. Press Command and S to save in most apps. Press Command and Z to undo. These shortcuts work with any keyboard — Bluetooth, USB-C, or Smart Connector. Different apps may have their own shortcuts; check the app's menu or settings to learn them.
Switching a keyboard between devices
If you want to use the same Bluetooth keyboard with multiple iPads, a Mac, or an iPhone, you can pair it with each device separately. The keyboard will remember all of them. To switch between devices, turn the keyboard off, then turn it back on near the device you want to use it with. The keyboard will reconnect to that device automatically.
Some keyboards have a button to switch between paired devices without turning off. Check your keyboard's manual to see if it has this feature. If it does, press the button and the keyboard will disconnect from the current device and connect to the next one in the list.
Frequently Asked Questions
Can I use a keyboard made for a computer with my iPad?
Yes, if it is a Bluetooth keyboard. Any Bluetooth keyboard made for Windows, Mac, or Android will pair with an iPad the same way. Older keyboards with USB receivers or proprietary wireless connections will not work. Check the keyboard's box or manual to confirm it says "Bluetooth."
Why does my keyboard keep disconnecting?
Bluetooth keyboards disconnect when the battery is low, when they move too far from the iPad (usually beyond 30 feet), or when another device is using the keyboard. Charge the keyboard fully, keep it close to your iPad, and make sure it is not paired with another device that is turned on nearby. If disconnections continue, try forgetting the keyboard and pairing it again.
Do I need to charge a Bluetooth keyboard?
Most Bluetooth keyboards use rechargeable batteries or replaceable AA/AAA batteries. Check your keyboard's manual to see which type it uses. Rechargeable keyboards usually last one to three weeks per charge depending on use. Keyboards with replaceable batteries last several months. A low battery is the most common reason a keyboard stops pairing or disconnects.
Can I use a keyboard case and a separate keyboard at the same time?
Yes. If your iPad is in a keyboard case, you can still pair a separate Bluetooth keyboard and switch between them. The iPad will use whichever keyboard is turned on and closest. If both are on, the one you paired most recently will take priority. You can also turn off the keyboard case's keyboard in its settings if you want to use only the separate keyboard.
What if my iPad is too old to support Bluetooth keyboards?
iPads from 2010 to 2013 may not support all modern Bluetooth keyboards. If your iPad is that old, check Apple's support page for your specific model to see which keyboards are compatible. You may need to use an older keyboard designed for that iPad generation, or consider a USB adapter if your iPad has a 30-pin connector.