Connect via Bluetooth on your LG monitor's settings menu
Most LG monitors with built-in speakers also have Bluetooth capability. To connect JBL headphones, turn on the headphones and put them in pairing mode — usually by holding the power button for 3 to 5 seconds until you see a flashing light. Then go to your monitor's settings menu (often accessed with the menu button on the back or side), find Bluetooth or Sound settings, and select "Scan" or "Add Device." Your JBL headphones should appear in the list within 10 seconds. Select them, and the connection completes in a few seconds.
Once paired, your JBL headphones will reconnect automatically the next time you turn them on near the monitor. The monitor remembers the connection, so you won't need to repeat the pairing process. If the headphones don't appear during the scan, make sure they're fully charged — low battery can prevent pairing mode from working properly.
Key Takeaways
- Put your JBL headphones in pairing mode by holding the power button until the light flashes, then scan for them in your monitor's Bluetooth settings.
- The monitor's menu button (usually on the back or side) opens the settings where you'll find Bluetooth or Sound options.
- Once paired, the headphones reconnect automatically when turned on near the monitor without repeating the pairing steps.
- If pairing fails, check that the headphones have enough battery and that no other device is trying to connect to them at the same time.
Check your LG monitor model for Bluetooth support
Not all LG monitors have Bluetooth built in. Older models or budget monitors often have only a 3.5mm headphone jack or no audio output at all. Check your monitor's manual or the back panel to see what connections it has. If you see a Bluetooth symbol or the manual lists "Bluetooth" under features, you're ready to pair. If your monitor has only a 3.5mm jack, you'll need a different approach.
You can find your monitor's model number on a sticker on the back or in your purchase receipt. Search "[model number] Bluetooth" online to confirm whether it supports wireless pairing. LG's newer UltraWide and gaming monitors are more likely to have Bluetooth than their standard office models.
Use a Bluetooth adapter if your monitor lacks wireless
If your LG monitor has a 3.5mm headphone jack but no Bluetooth, a small USB or 3.5mm Bluetooth adapter bridges the gap. Plug the adapter into the monitor's headphone jack, put your JBL headphones in pairing mode, and scan for them on the adapter. The adapter acts as a middleman, converting the wired connection into a wireless one.
USB Bluetooth adapters (sometimes called dongles) are inexpensive and work with most headphones. They plug into a USB port on your monitor if it has one, or into a USB hub connected to your computer. A 3.5mm adapter plugs directly into the headphone jack. Both types work equally well for audio — choose based on which ports your monitor actually has available.
Adjust audio output to the headphones after pairing
After pairing, your monitor may still send sound to its built-in speakers. Go back to the Sound settings in your monitor's menu and look for "Audio Output" or "Speaker Select." Choose your JBL headphones from the list. Some monitors call this "Bluetooth Speaker" or "Wireless Audio Device" instead of the headphone brand name.
If you're using a computer connected to the monitor, you may also need to change the audio output in Windows or macOS. Right-click the volume icon in your system tray (Windows) or click the volume icon in the menu bar (Mac), then select your JBL headphones as the output device. The monitor's setting and your computer's setting work together — both need to point to the headphones for sound to reach them.
Troubleshoot if the headphones won't stay connected
If your JBL headphones disconnect randomly or won't connect at all, try these steps in order: First, forget the pairing on both devices. On the monitor, go to Bluetooth settings and select "Remove" or "Forget" next to your headphones. On the headphones, hold the power button for 10 seconds to reset them completely. Then pair them again from scratch.
If that doesn't work, check whether another device (your phone, tablet, or computer) is trying to connect to the same headphones. Bluetooth headphones can only pair with one device at a time, so disconnect them from other devices first. Also move closer to the monitor — Bluetooth has a range of about 30 feet, but walls and other electronics can reduce that. If the headphones still won't connect, check whether your monitor's firmware is current by visiting LG's support website and searching for your model number.
Connect through your computer if the monitor lacks Bluetooth
If your monitor has no Bluetooth and you don't want to buy an adapter, connect the headphones to your computer instead. Pair your JBL headphones with your Windows PC or Mac using the same pairing mode process, then set them as the default audio output in your system settings. Sound from your monitor will play through your computer's audio output, which now goes to the headphones.
This method works well if your computer is already connected to the monitor via HDMI or DisplayPort. The audio travels from the monitor to your computer, then to the headphones. The downside is that you'll need to keep your computer on and nearby — you can't use the monitor's audio independently. This is most practical if you're already using the monitor as a computer display.
Frequently Asked Questions
Why does my LG monitor say "Bluetooth pairing failed"?
The headphones are usually still in pairing mode from a previous attempt. Hold the power button on the JBL headphones for 10 seconds to reset them, then try pairing again. Also check that the headphones have at least 20 percent battery — low battery prevents pairing from working.
Can I use JBL headphones with my monitor and my phone at the same time?
No. Bluetooth headphones connect to one device at a time. To switch between your monitor and phone, you'll need to disconnect from one and reconnect to the other. Some JBL models have a button to switch between paired devices, but you still can't use both simultaneously.
What if my JBL headphones pair but produce no sound?
Check that the headphones are set as the audio output device in your monitor's Sound settings menu. Also check your computer's audio settings if the monitor is connected to a PC — the computer's output setting overrides the monitor's setting. Unmute the headphones by pressing the volume button, and make sure the monitor's volume isn't set to zero.
Do I need to pair my JBL headphones every time I use them?
No. Once paired, the headphones remember the monitor and reconnect automatically when you turn them on. You only pair once. If they don't reconnect automatically, they may have lost the pairing — try turning them off and on again, or move them closer to the monitor.
Will connecting JBL headphones to my monitor affect the monitor's built-in speakers?
Once you set the headphones as the audio output, the monitor's speakers will stop playing sound. If you want to switch back to speakers, go to Sound settings and select "Internal Speaker" or "Monitor Speaker" as the output device. The monitor remembers both settings, so switching between them takes just a few seconds.