The basic steps to pair Skullcandy headphones

To connect Skullcandy headphones to a phone or computer, you put the headphones into pairing mode, then select them from your device's Bluetooth settings. Most Skullcandy models enter pairing mode when you hold the power button for 5 to 10 seconds — the light will flash (usually blue or red) to signal they're ready. Once that light is flashing, open your phone or computer's Bluetooth settings, look for the headphones' name in the available devices list, and tap or click to connect. The first time you pair takes about 30 seconds; after that, the headphones will reconnect automatically when you turn them on.

The exact button location and hold time varies by model. Skullcandy makes over 50 different headphone styles, from earbuds to over-ear models, and not all of them use the same controls. Before you start, check the model name printed on your headphones or the box they came in, then look up the specific pairing instructions on Skullcandy's website or in the quick-start guide that came with them.

Key Takeaways

  • Hold the power button for 5 to 10 seconds until the light flashes to enter pairing mode; the exact time depends on your specific Skullcandy model.
  • Go to your phone or computer's Bluetooth settings and select your headphones from the list of available devices.
  • Once paired, your headphones will reconnect automatically the next time you turn them on, as long as Bluetooth is on.
  • If pairing fails, restart both the headphones and your device, then try again from the beginning.
  • Skullcandy's website has model-specific guides if your headphones use different controls than the standard power-button method.

Finding the power button and pairing mode on your model

Skullcandy headphones have the power button in different places depending on the style. On over-ear models like the Crusher or Hesh, it's usually on the outside of one ear cup. On earbuds like the Push or Dime, it's often a button on the charging case or a touch-sensitive area on the earbud itself. The quick-start guide that came with your headphones shows exactly where it is — if you don't have the physical guide, you can find a PDF version by searching "Skullcandy [your model name] manual" on Skullcandy's support page.

When you hold the power button, watch the LED light on the headphones. In pairing mode, it will flash repeatedly — usually blue, but sometimes red or white depending on the model. If the light stays solid or doesn't light up at all, the headphones are not in pairing mode yet. Let go and try holding the button again for a few more seconds. Some models require you to hold it until you hear a voice prompt saying "pairing mode" before the light starts flashing.

Connecting on iPhone or iPad

Open Settings, tap Bluetooth, and make sure Bluetooth is turned on. Your Skullcandy headphones should appear in the "Available Devices" section within a few seconds of entering pairing mode. The name will usually be something like "Skullcandy Crusher" or "Skullcandy Push" — it matches the model name on your headphones. Tap the name to connect.

If you see "Not Connected" or "Connecting" for more than 30 seconds, tap the information icon (the small "i" next to the headphones name) and choose "Forget This Device," then try pairing again from the beginning. Sometimes the connection gets stuck if the headphones were previously paired with a different device.

Connecting on Android phones

Open Settings, go to Connected Devices or Bluetooth (the exact name varies by phone brand), and turn Bluetooth on. Wait a few seconds for your Skullcandy headphones to appear in the list. Tap the name to connect. On some Android phones, you may see a popup asking you to confirm the pairing — if so, tap "Pair" or "Connect."

Android remembers paired devices more reliably than iPhone, so once you've connected once, the headphones should reconnect automatically whenever both devices have Bluetooth on. If they don't reconnect, go back to Bluetooth settings and tap the headphones name again.

Connecting on Windows or Mac computers

On Windows 10 or 11, go to Settings, select Devices, then Bluetooth & Devices, and turn Bluetooth on. Your Skullcandy headphones will appear in the list within a few seconds. Click the name to connect. On Mac, go to System Settings (or System Preferences on older versions), click Bluetooth, and select your headphones from the list.

Computer connections are usually more stable than phone connections because computers have larger Bluetooth antennas. Once paired, your headphones will show up in the Bluetooth menu even when they're turned off — just turn the headphones on and they'll reconnect automatically. If you want to disconnect without unpairing, click the headphones name and choose "Disconnect" instead of "Forget."

What to do if pairing fails or keeps disconnecting

If the headphones won't show up in your device's Bluetooth list, first check that they're actually in pairing mode — the light should be flashing, not solid. If it's not flashing, hold the power button again. If the light is flashing but the headphones still don't appear, restart both the headphones and your device, then try again.

If the headphones connect but then disconnect after a few seconds, they may already be paired with another device. Skullcandy headphones can only connect to one device at a time, so if they're still paired with your laptop, they won't stay connected to your phone. Go to the laptop's Bluetooth settings and choose "Forget" or "Unpair," then try connecting to your phone again.

If you've restarted both devices and the headphones still won't pair, try a factory reset. Most Skullcandy models reset by holding the power button for 15 to 20 seconds (longer than the pairing mode hold). The light will flash rapidly or turn off completely, which signals the reset is complete. After a reset, the headphones will no longer be paired with any device, and you can start the pairing process fresh.

Switching your headphones between devices

Once your Skullcandy headphones are paired with one device, you can pair them with a second device without unpairing the first. Just put the headphones in pairing mode again and select them from the second device's Bluetooth settings. The headphones will now be paired with both devices, but they can only play audio from one at a time.

When you want to switch which device the headphones are connected to, turn off Bluetooth on the device they're currently using, then turn on Bluetooth on the device you want to use. The headphones will automatically connect to the second device within a few seconds. This works smoothly for most people, but if the headphones don't switch automatically, manually select them from the new device's Bluetooth settings.

Frequently Asked Questions

Why do my Skullcandy headphones keep disconnecting?

The most common cause is that they're still paired with another device. Skullcandy headphones can only connect to one device at a time, so if your laptop has Bluetooth on and the headphones are paired with it, they'll disconnect from your phone. Go to your laptop's Bluetooth settings and unpair the headphones, then reconnect them to your phone.

Can I pair my Skullcandy headphones with two devices at once?

You can pair them with multiple devices, but they'll only play audio from one at a time. Once paired with both, you switch between them by turning Bluetooth off on one device and on on the other. The headphones will reconnect to the second device automatically within a few seconds.

What if I forgot which button is the power button?

Check the quick-start guide that came in the box, or search "Skullcandy [your model name] manual" on Skullcandy's support website to find a PDF. If you can't find the model name, look at the headphones themselves — it's usually printed on the ear cup or inside the charging case.

Do I have to pair my headphones every time I use them?

No. Once paired, your headphones will reconnect automatically when you turn them on, as long as Bluetooth is on on your device. You only need to go through the pairing process once per device, or if you reset the headphones.

Why won't my headphones show up in the Bluetooth list?

Make sure the headphones are in pairing mode — the light should be flashing, not solid. If it's not flashing, hold the power button again for 5 to 10 seconds. If the light is flashing but they still don't appear, restart both the headphones and your device and try again.