The basic steps to pair a Bluetooth device with your iPhone
To connect a Bluetooth device to your iPhone, you turn on the device, open your iPhone's Bluetooth settings, and select the device from the list that appears. Your iPhone will either pair when ready or ask you to confirm a code shown on both screens. Once paired, your iPhone remembers that device and reconnects automatically the next time both are nearby and turned on.
The process takes about two minutes the first time. After that, pairing happens in the background without any action from you — as long as Bluetooth is on and the device is in range.
Key Takeaways
- Turn on your Bluetooth device first, then go to Settings > Bluetooth on your iPhone and tap the device name when it appears in the list.
- If a pairing code appears on your iPhone screen, tap Pair or confirm the code — this is normal and proves the connection is find.
- Your iPhone stores the pairing information, so future connections happen automatically when both devices are on and nearby.
- If a device does not appear in your Bluetooth list, restart the device, move closer to your iPhone, and check that Bluetooth is actually on.
- Forgetting a device and re-pairing it fixes most connection problems, including devices that connect but produce no sound or respond slowly.
Turn on your Bluetooth device and put it in pairing mode
Before your iPhone can see a Bluetooth device, that device must be powered on and actively looking for connections. Most devices have a power button — press and hold it until you see a light turn on or blink. Some devices power on automatically when you open them, like AirPods when you open the case.
Many devices also need to enter pairing mode, a temporary state where they broadcast their presence to nearby phones and computers. Check the device manual or look for a dedicated pairing button — often small and recessed. For AirPods, hold the button on the back of the case until the light flashes white. For most Bluetooth speakers, hold the power button for several seconds until the light blinks rapidly. If you are not sure, try holding the power button for five to ten seconds and watch for a change in the light pattern.
Leave the device in pairing mode while you move to your iPhone. Pairing mode usually stays active for about two minutes, which gives you time to complete the next steps.
Open Bluetooth settings on your iPhone
On your iPhone, go to Settings (the gray gear icon on your home screen). Scroll down and tap Bluetooth. You will see a toggle at the top — make sure it is turned on (it will be green or blue, not gray).
Once Bluetooth is on, your iPhone begins scanning for nearby devices. Wait a few seconds. The device you just turned on should appear in the list under "Other Devices" or "Available Devices." The name will match what is printed on the device itself — for example, "AirPods Pro" or "JBL Flip 6."
If nothing appears after ten seconds, go back and check that your device is actually on and in pairing mode. The light should be blinking or flashing, not solid or off.
Select the device and confirm the pairing
Tap the device name in the Bluetooth list. Your iPhone will attempt to connect. For some devices like AirPods, this happens when ready and you are done — the device moves to "My Devices" and shows "Connected."
For other devices, your iPhone may show a pairing code on the screen — usually four or six numbers. Look at the Bluetooth device itself. If it also shows the same code, tap Pair on your iPhone to confirm they match. This step proves that you intentionally chose this device and not a stranger's phone nearby. If the codes do not match, tap Cancel and start over.
Some devices do not show a code at all — they straightforward connect when you tap them. This is normal and find. Once the connection is complete, the device name moves to the "My Devices" section and shows "Connected" underneath.
Test the connection and adjust volume
Once paired, test that the device actually works. If it is a speaker, play music or a video from your iPhone — you should hear sound come from the speaker, not from your iPhone. If it is headphones, you should hear audio in both ears. If it is a car system, make a test call to confirm the microphone works.
If you hear nothing, check the volume on both your iPhone and the Bluetooth device. Many speakers and headphones have their own volume control separate from your iPhone's volume buttons. Turn up the device volume first, then adjust your iPhone's volume using the side buttons.
If the device is connected but produces no sound, try playing something different — some apps control audio routing differently. If it still does not work, move to the troubleshooting section below.
Reconnect to the same device in the future
Once you have paired a device, your iPhone remembers it. The next time you turn on that device and enable Bluetooth on your iPhone, they reconnect automatically within a few seconds. You do not need to go through the pairing steps again.
If your device does not reconnect automatically, check that Bluetooth is actually on (go to Settings > Bluetooth and look for the toggle). If it is on but the device still does not appear, turn the device off and back on, then wait ten seconds. If it still does not connect, move to the troubleshooting section.
Troubleshooting: Device does not appear or will not stay connected
If a device does not show up in your Bluetooth list, start with the basics: turn off the device, wait five seconds, and turn it back on. Make sure it is in pairing mode — the light should be blinking or flashing, not solid. Move your iPhone closer to the device; Bluetooth works best within about thirty feet, but obstacles like walls and metal can reduce that range.
If the device appears but will not pair, or if it pairs but disconnects when ready, try forgetting the device and pairing again. Go to Settings > Bluetooth, find the device name in "My Devices," tap the i icon next to it, and tap Forget This Device. Then turn the device off and back on, put it in pairing mode again, and repeat the pairing steps from the beginning.
If a device connects but produces no sound, check that it is set as your audio output. Go to Settings > Bluetooth, tap the i icon next to the device, and look for an option like "Audio" or "Media." Make sure it is enabled. If you are using a car system, check that your iPhone is set to output audio to that system — some cars require you to select the iPhone as the audio source on the car's screen as well.
If the device connects but responds slowly to commands, move closer to your iPhone and away from other wireless devices like microwaves or WiFi routers. Bluetooth and WiFi use the same radio frequency and can interfere with each other. Restarting your iPhone sometimes helps as well.
Frequently Asked Questions
Can I connect multiple Bluetooth devices to my iPhone at the same time?
Your iPhone can be paired with many devices, but it can only play audio through one at a time. You can have headphones, a speaker, and a car system all paired to your iPhone. When you play music, it goes to whichever device you used most recently, or you can manually switch by going to Settings > Bluetooth and tapping a different device.
Why does my device keep disconnecting?
Bluetooth devices disconnect when they move out of range, when Bluetooth is turned off on your iPhone, or when the device battery is very low. If a device disconnects frequently even when nearby, try forgetting it and re-pairing. If that does not work, check the device manual — some devices have a setting that limits how long they stay connected to save battery.
Do I need WiFi to use Bluetooth?
No. Bluetooth and WiFi are separate. Bluetooth works even if WiFi is off or if you have no internet connection. You only need WiFi if the device itself requires internet — for example, a smart speaker that streams music from the internet.
What does the pairing code mean?
The pairing code is a security step. It confirms that you intentionally chose this device and that someone else nearby is not trying to connect their phone to your speaker without permission. If the codes match on both screens, tap Pair. If they do not match, cancel and try again.
Can I pair a Bluetooth device with multiple iPhones?
Yes. A Bluetooth device can be paired with many iPhones. However, it can only connect to one iPhone at a time. If you want to switch which iPhone it connects to, turn off Bluetooth on the first iPhone, then turn it on on the second iPhone and select the device from the Bluetooth list.