The basic pairing process for Beats

To connect Beats wireless headphones or speakers to your phone, computer, or tablet, put the Beats into pairing mode, then select them from your device's Bluetooth menu. Most Beats enter pairing mode automatically the first time you turn them on. After that first pairing, they reconnect to the same device whenever both are powered on and in range — you do not have to pair them again each time.

The pairing process takes about 30 seconds total. Your Beats will show a light (usually blue or white) that blinks while searching for a device to connect to. Once the light stops blinking or turns solid, the pairing is complete and you can start playing audio.

If your Beats do not enter pairing mode automatically, look for a small button on the headphones or speaker — often labeled with a Bluetooth symbol or power icon. Hold it for 5 to 10 seconds until you see the pairing light. The exact button location and hold time varies by model, so check the label on your device or the quick-start card that came in the box.

Key Takeaways

  • New Beats enter pairing mode automatically when you turn them on for the first time, and you select them from your device's Bluetooth settings to complete the connection.
  • After the first pairing, your Beats reconnect automatically whenever both devices are powered on and within range — usually 30 feet indoors.
  • If pairing mode does not start automatically, hold the Bluetooth button on your Beats for 5 to 10 seconds until the light blinks.
  • You can pair most Beats models with multiple devices, but they only connect to one device at a time unless that device supports multipoint Bluetooth.

Pairing Beats with an iPhone or iPad

Open Settings, tap Bluetooth, and make sure Bluetooth is turned on. Your Beats should appear in the list under "Available Devices" while they are in pairing mode. Tap the name of your Beats to connect. Once connected, they move to the "My Devices" section at the top of the Bluetooth menu.

If your Beats do not appear in the list, make sure they are powered on and in pairing mode. If they still do not show up after 30 seconds, turn your Beats off and on again, then hold the pairing button for 10 seconds. Go back to your iPhone or iPad's Bluetooth menu and look again.

After the first pairing, your Beats automatically reconnect to your iPhone or iPad whenever you turn them on. You do not need to go back into Settings. If they do not reconnect after a few seconds, open the Bluetooth menu and tap your Beats name to manually reconnect.

Pairing Beats with an Android phone or tablet

Open Settings, go to Connected Devices or Bluetooth (the exact name depends on your phone's manufacturer), and turn Bluetooth on. Your Beats should appear in the list of available devices. Tap the name to connect. Some Android phones show a pairing confirmation dialog — if yours does, tap "Pair" to complete the connection.

Android devices sometimes take longer to detect Beats than iPhones do. If your Beats do not appear after 30 seconds, turn them off, turn them back on, and hold the pairing button again. Then return to your phone's Bluetooth menu and refresh the list by turning Bluetooth off and back on.

Once paired, your Beats reconnect automatically the next time you turn them on. If they connect to a different Android device instead, you can manually select them from the Bluetooth menu on the device you want to use.

Pairing Beats with a Mac or Windows computer

On a Mac, click the Bluetooth icon in the menu bar at the top of the screen, then select your Beats from the list. On Windows 10 or 11, go to Settings, select Devices, then Bluetooth and Other Devices, and click "Add Bluetooth or Other Device." Choose Bluetooth, then select your Beats from the list that appears.

If the Bluetooth icon does not appear on your Mac's menu bar, go to System Settings, click Bluetooth, and make sure Bluetooth is turned on. On Windows, if Bluetooth is not available, your computer may not have a Bluetooth adapter — check your device specifications or contact the manufacturer.

After pairing, your Beats appear in the Bluetooth menu on your computer. You can connect and disconnect them from that menu without pairing again. If your computer has multiple Bluetooth devices, you may need to select your Beats each time you want to use them, depending on which device was last connected.

Connecting Beats to multiple devices

Most Beats models can be paired with up to 8 different devices, but they only play audio from one device at a time. Once you have paired your Beats with your iPhone, iPad, Mac, and Android phone, they automatically connect to whichever device you use them with next — as long as that device is powered on and in range.

If your Beats connect to the wrong device, disconnect them from that device's Bluetooth menu and then reconnect them to the device you want to use. Some newer Beats models support multipoint Bluetooth, which means they can stay connected to two devices at once and switch between them automatically when you start playing audio on a different device. Check your Beats model's specifications to see if this feature is available.

To remove a device from your Beats' paired list, go to that device's Bluetooth settings, find your Beats in the list, and select "Forget" or "Remove." This does not delete the pairing from your Beats — it only removes the pairing from that specific device. You can pair them again anytime by putting your Beats back into pairing mode.

Troubleshooting when Beats will not connect

If your Beats appear in the Bluetooth menu but will not actually connect, try turning both devices off completely, waiting 10 seconds, and turning them back on. Then put your Beats into pairing mode again and attempt to connect. This resets the Bluetooth connection and often solves temporary glitches.

If your Beats still will not connect after a restart, forget the pairing from your device's Bluetooth menu and pair them again from scratch. On iPhone or iPad, go to Settings > Bluetooth, find your Beats, tap the info icon next to the name, and select "Forget This Device." On Android, long-press your Beats name and select "Forget." On Mac or Windows, right-click your Beats in the Bluetooth menu and select "Remove" or "Forget Device." Then put your Beats back into pairing mode and pair them again.

If your Beats are out of battery, they cannot enter pairing mode or connect to anything. Charge them for at least 15 minutes before attempting to pair. If your Beats still do not respond after charging, try a factory reset — most models reset by holding the power button for 10 to 15 seconds until you see a specific light pattern. Check your model's manual or the Beats support website for the exact reset procedure for your headphones or speaker.

Why your Beats keep disconnecting

Beats disconnect when they move out of Bluetooth range, which is typically 30 feet indoors and up to 100 feet in open space, depending on obstacles and interference. If you walk into another room and your Beats disconnect, they are straightforward too far from your device. Move closer and they should reconnect automatically within a few seconds.

If your Beats disconnect even when you are close to your device, other wireless devices in your home may be causing interference. Bluetooth operates on the 2.4 GHz frequency, the same band used by Wi-Fi routers, microwaves, and cordless phones. If you have multiple devices using this frequency in the same area, they can interfere with each other. Try moving your Beats and your device away from your Wi-Fi router or microwave, or turn off Wi-Fi temporarily to see if that solves the problem.

Outdated software on your phone, tablet, or computer can also cause disconnection issues. Check for system updates and install them if available. If your Beats have a companion app (like the Beats app on iPhone or the Beats Updater on Mac), open it and check for firmware updates for your headphones or speaker.

Frequently Asked Questions

Do I have to pair my Beats every time I use them?

No. After the first pairing, your Beats automatically reconnect to your device whenever both are powered on and in range. You only pair once per device. If your Beats connect to a different device instead, you can manually select them from the Bluetooth menu on the device you want to use.

Can I use my Beats with two devices at the same time?

Most Beats models can only play audio from one device at a time, even if they are paired with multiple devices. Some newer Beats models support multipoint Bluetooth, which lets them stay connected to two devices and automatically switch between them when you start playing audio on a different device. Check your model's specifications to see if this feature is included.

What should I do if my Beats will not show up in the Bluetooth menu?

Make sure your Beats are powered on and in pairing mode — the light should be blinking. If they still do not appear after 30 seconds, turn your Beats off and on again, hold the pairing button for 10 seconds, and check the Bluetooth menu again. If your device's Bluetooth is off, turn it on first. On some devices, you may need to restart Bluetooth by turning it off and back on.

Why do my Beats keep disconnecting from my device?

Beats disconnect when they move out of range, which is usually 30 feet indoors. If they disconnect while you are close by, other wireless devices like Wi-Fi routers or microwaves may be causing interference. Try moving away from these devices or turning off Wi-Fi temporarily. If the problem continues, check for software updates on your phone, tablet, or computer.

How do I remove my Beats from a device I no longer use?

Go to that device's Bluetooth settings, find your Beats in the list, and select "Forget," "Remove," or "Unpair." This removes the pairing from that device only — your Beats still have the pairing information stored. You can pair them with that device again anytime by putting them back into pairing mode.