The basic pairing process for Beats Studio

Beats Studio headphones connect to your device through Bluetooth, which means you put them into pairing mode, then tell your phone or computer to find and remember them. The headphones stay paired after the first time, so you won't repeat this process every day — only when you're connecting to a new device or if the connection drops and won't come back.

The first step is to turn on the headphones. Press and hold the power button on the right ear cup for about three seconds until you see the LED light flash. The light will blink red and blue, which means the headphones are in pairing mode and searching for a device to connect to.

While the headphones are flashing, go to your device's Bluetooth settings. On an iPhone or iPad, open Settings, tap Bluetooth, and turn it on. On Android, open Settings, find Connected devices or Bluetooth, and turn it on. On a Mac, click the Apple menu, go to System Settings, then Bluetooth. On Windows, open Settings, select Devices, then Bluetooth & devices.

Key Takeaways

  • Hold the power button for three seconds until the LED flashes red and blue to put Beats Studio into pairing mode.
  • Open your device's Bluetooth settings and look for "Beats Studio" in the list of available devices.
  • Tap or click the Beats Studio name to complete the pairing, which usually takes less than a minute.
  • Once paired, the headphones will reconnect automatically when you turn them on and Bluetooth is enabled on your device.
  • If pairing fails, restart both the headphones and your device, then try again from the beginning.

Finding and selecting Beats Studio in your device's Bluetooth list

After you turn on Bluetooth on your device, wait a few seconds for it to scan for nearby devices. You should see "Beats Studio" appear in the list of available devices. The exact name might include a number or letter at the end, depending on the model year, but it will start with "Beats Studio."

Tap or click on "Beats Studio" in the list. Your device will send a connection request to the headphones. The LED on the headphones will stop flashing and turn solid blue, which means the pairing was successful. You should also see a notification on your device confirming the connection.

What to do if the headphones don't appear in the Bluetooth list

If you don't see Beats Studio in your device's Bluetooth list after waiting 10 to 15 seconds, the headphones may not be in pairing mode. Turn off the headphones completely by pressing the power button until the LED goes dark. Wait five seconds, then press and hold the power button again for three seconds until you see the red and blue flash.

If the headphones still don't appear, restart your device's Bluetooth. On iPhone or iPad, turn Bluetooth off in Settings, wait 10 seconds, then turn it back on. On Android, do the same in your Bluetooth settings. On Mac or Windows, toggle Bluetooth off and on in your system settings. Then try the pairing process again.

If the headphones appear in the list but won't connect when you tap them, the headphones may already be paired to another device. Beats Studio can only connect to one device at a time, so you may need to unpair them from the other device first. Go to that device's Bluetooth settings, find Beats Studio in the list of paired devices, and select "Forget" or "Unpair."

Reconnecting after the initial pairing

Once you've paired the headphones to a device, they will remember that device. The next time you turn on the headphones and your device has Bluetooth enabled, they should connect automatically within a few seconds. You don't need to go through the pairing process again.

If the headphones don't reconnect automatically, make sure Bluetooth is turned on on your device. Then turn the headphones off and back on. If they still won't connect, go to your device's Bluetooth settings, find Beats Studio in the list of paired devices, and tap "Connect" or "Reconnect."

Switching the headphones between multiple devices

Beats Studio can be paired to multiple devices at once, but they can only play audio from one device at a time. If you want to switch from your phone to your laptop, turn off Bluetooth on your phone, then turn on Bluetooth on your laptop. The headphones will automatically connect to the laptop within a few seconds.

If the headphones don't switch automatically, go to your laptop's Bluetooth settings and select Beats Studio from the list of paired devices. The connection will switch when ready, and audio from your phone will stop playing through the headphones.

Resetting the headphones if pairing still won't work

If you've tried restarting both the headphones and your device and pairing still fails, you can reset the headphones to factory settings. This erases all paired devices and returns the headphones to the state they were in when new. Press and hold both the power button and the volume down button for about 10 seconds until the LED flashes red several times. The headphones are now reset.

After a reset, the headphones will be in pairing mode automatically. Go back to your device's Bluetooth settings and pair them as if for the first time. You'll need to repeat this process for any other devices you want to use with the headphones.

Understanding the LED light signals

The LED light on the right ear cup tells you the status of the headphones. A solid blue light means the headphones are connected and ready to use. A blinking red and blue light means the headphones are in pairing mode and waiting for a device to connect. A red light that blinks once every few seconds means the battery is low. A dark LED means the headphones are off or the battery is completely dead.

If you see a red light that stays on without blinking, the headphones may be overheating or experiencing a hardware problem. Let them cool down for 15 to 20 minutes, then try turning them on again. If the red light persists, the headphones may need service.

Frequently Asked Questions

Why do my Beats Studio keep disconnecting from my phone?

Disconnections usually happen when your phone's Bluetooth is turned off, when you move too far away from the phone, or when another device tries to connect to the headphones at the same time. Keep your phone within 30 feet of the headphones and make sure Bluetooth stays on. If one device keeps trying to connect, unpair the headphones from that device in its Bluetooth settings.

Can I pair Beats Studio to two devices at the same time?

Yes, you can pair them to multiple devices, but they will only play audio from one at a time. To switch between devices, turn off Bluetooth on the current device or manually select the headphones in the other device's Bluetooth settings. The headphones will connect to whichever device you select.

What if I forgot which device my Beats Studio are paired to?

Reset the headphones by holding the power button and volume down button for 10 seconds until the LED flashes red. This erases all pairings. Then pair them to your current device as if for the first time. You can re-pair them to other devices later if you need to.

Do I need to pair my Beats Studio every time I use them?

No. Once paired, the headphones will reconnect automatically when you turn them on and Bluetooth is enabled on your device. You only pair once per device. If they don't reconnect automatically, make sure Bluetooth is on and try turning the headphones off and back on.

Why is the LED flashing red and blue even though I'm not trying to pair?

The headphones enter pairing mode when you hold the power button for three seconds. If you see the red and blue flash, you accidentally triggered pairing mode. Press the power button once to exit pairing mode, or wait a few minutes and the headphones will exit automatically if no device connects.