The basic steps to pair an AirTag

To connect an AirTag, hold it near your iPhone or iPad with Bluetooth turned on. Your device will detect it automatically and show a setup screen. Tap Connect, then follow the prompts to name the tag and choose what to track. The whole process takes about one minute.

You need an iPhone 11 or newer, iPad Pro (2nd generation or newer), iPad Air (3rd generation or newer), iPad (5th generation or newer), or iPad mini (5th generation or newer). Your device must be running iOS 14.3 or iPadOS 14.3 or later. If you have an older device, you cannot pair an AirTag.

Make sure Bluetooth is on before you start. Go to Settings, tap Bluetooth, and toggle it on. The AirTag uses Bluetooth Low Energy, which drains very little battery from your device, so you can leave Bluetooth on all the time without worry.

Key Takeaways

  • Hold an AirTag near your iPhone or iPad and tap Connect when the setup screen appears — no manual pairing code needed.
  • You must have iOS 14.3 or later and an iPhone 11 or newer (or compatible iPad) for the AirTag to work.
  • Bluetooth must be on, but AirTag uses so little power that leaving Bluetooth enabled all the time has almost no effect on battery life.
  • After pairing, you can rename the tag and assign it to a person in your Contacts so others can see its location if you share it with them.

What happens during the pairing handshake

When you hold the AirTag close to your device, Bluetooth Low Energy broadcasts a signal that your phone picks up. Your phone recognizes the AirTag's unique identifier and sends back a connection request. The AirTag accepts the connection and the two devices exchange encryption keys — this is the security step that prevents someone else from hijacking your tag.

Once the keys are exchanged, your phone and the AirTag are paired. This pairing is permanent — you do not have to reconnect every time you use it. Your phone remembers the AirTag and will reconnect automatically whenever Bluetooth is on and the tag is in range.

The setup screen that appears after pairing lets you name the tag (like "Keys" or "Wallet") and assign it to yourself or another person in your Contacts. If you assign it to someone else, they can see the tag's location in the Find My app on their device.

Troubleshooting a failed pairing attempt

If the setup screen does not appear after holding the AirTag near your phone, turn Bluetooth off and back on, then try again. Wait a few seconds between turning it off and on. If that does not work, restart your phone completely — this clears temporary Bluetooth glitches that prevent pairing.

Check that your phone's software is up to date. Go to Settings, tap General, then Software Update. If an update is available, install it before trying to pair again. Older iOS versions sometimes have Bluetooth bugs that newer versions fix.

If you are pairing multiple AirTags at once, do them one at a time. Pairing two tags simultaneously can confuse your phone's Bluetooth radio. Wait for the first tag to finish setup completely before bringing the second one close.

If the AirTag still will not pair after restarting your phone and updating iOS, the tag itself may be defective. Try pairing it with a different device if you have access to one. If it fails on multiple devices, contact Apple Support.

How to pair an AirTag with a second device

An AirTag can be paired to only one Apple ID at a time. If you want to use it on a second phone, you must unpair it from the first one first. Open the Find My app, go to the Items tab, tap the AirTag you want to remove, scroll down, and tap Remove Item. Confirm the removal.

Once you have removed it, the AirTag is unpaired and ready to connect to a different device. Hold it near the second phone and follow the same pairing steps as before. The tag will pair to the new device's Apple ID.

If you share an AirTag with another person, you do not need to unpair it. Instead, open Find My, tap the tag, scroll to Sharing, and tap Add Person. Send them an invitation through Messages or Mail. Once they accept, they can see the tag's location in their own Find My app without you having to unpair it.

Why your AirTag might not show up after pairing

After pairing, the AirTag should appear in the Find My app under the Items tab. If it does not show up, make sure Bluetooth is still on and the tag is in range — Bluetooth has a range of about 30 feet in open space, less through walls. Move closer to the tag and wait a few seconds.

If the tag still does not appear, open the Find My app and pull down to refresh. Sometimes the app does not update when ready after pairing. If refreshing does not work, close the app completely and open it again.

Check that you are signed into iCloud with the same Apple ID you used to pair the tag. Go to Settings, tap your name at the top, and confirm you are signed in. If you are signed into a different Apple ID than the one you used during pairing, the tag will not appear.

Pairing an AirTag with a Mac or Apple Watch

You cannot pair an AirTag directly to a Mac or Apple Watch. The tag only pairs with iPhone and iPad. However, once it is paired to your iPhone, you can see it and control it from a Mac or Apple Watch that is signed into the same iCloud account.

On a Mac, open the Find My app (in Applications > Utilities) and sign in with your Apple ID. Your AirTags will appear in the Items tab. On an Apple Watch, open the Find My app and you will see the same tags. Both devices pull the location data from your iPhone, so the tag itself is still paired only to your phone.

If you want to find an AirTag using a Mac or Apple Watch, you can play a sound on it or see its location on a map, just as you would on your iPhone. The tag responds to commands from any device signed into your iCloud account.

What to do if you lose or replace an AirTag

If you lose an AirTag, you can mark it as lost in the Find My app. Tap the tag, scroll down, and toggle on Lost Mode. Anyone who finds the tag and holds it near their iPhone will see a message with your phone number or email address, depending on what you entered during setup.

If you replace an AirTag with a new one, remove the old tag from Find My first (tap it, scroll down, tap Remove Item). Then pair the new tag to your phone using the same steps as before. You can reuse the same name and assignment if you want.

If someone gives you an AirTag that is already paired to their Apple ID, you cannot use it until they remove it from their account. Ask them to open Find My, tap the tag, scroll down, and tap Remove Item. Once they do, the tag is unpaired and you can pair it to your own device.

Frequently Asked Questions

Do I need to enter a pairing code to connect an AirTag?

No. AirTag pairing is automatic — your phone detects the tag and shows a Connect button. You do not type in any code or password. This is different from pairing some Bluetooth speakers or headphones, which sometimes require a PIN.

Can I pair an AirTag to an Android phone?

No. AirTag only works with Apple devices. Android phones cannot pair with or track AirTags. If you need a tracking tag for Android, look at alternatives like Tile or Samsung SmartTags.

What if my AirTag is already paired to someone else?

You cannot pair it until the original owner removes it from their account. Ask them to open Find My, tap the tag, scroll down, and tap Remove Item. Once they do, the tag is unpaired and ready for you to pair to your device.

Does pairing an AirTag drain my phone's battery?

No. AirTag uses Bluetooth Low Energy, which consumes very little power. Leaving Bluetooth on all the time has almost no noticeable effect on your phone's battery life, so you do not need to turn it off after pairing.

Can I pair one AirTag to multiple phones at the same time?

No. An AirTag pairs to one Apple ID only. If you want to share it with another person, pair it to your phone first, then use the Sharing feature in Find My to invite them. They will see the tag's location without you having to unpair it.