The basic steps to pair AirPods with your phone

To connect AirPods to your phone, you put them in pairing mode, then select them from your phone's Bluetooth settings. The exact steps depend on whether you have an iPhone or Android device, but the principle is the same: your AirPods broadcast a signal saying "I'm here and ready to connect," and your phone listens for that signal and locks onto it.

For iPhones, the process is faster because Apple designed both the AirPods and the phone. For Android phones, it takes a few more taps but works just as reliably once you know where to look.

Key Takeaways

  • AirPods enter pairing mode when you open the case near an unpaired phone, or by holding the button on the back of the case for 15 seconds.
  • On iPhone, AirPods appear in a popup window as soon as they enter pairing mode; on Android, you find them in Bluetooth settings under "Available devices."
  • Once paired, your AirPods will reconnect to that phone automatically whenever they are in range and the phone's Bluetooth is on.
  • If AirPods are already paired to another device, you must unpair them first or reset them to factory settings before pairing with a new phone.

Pairing AirPods with an iPhone

Open your AirPods case and hold it near your iPhone. A white setup screen should appear on your phone within a few seconds, showing an image of the AirPods and a button that says "Connect." Tap that button. Your iPhone will confirm the pairing and you are done — your AirPods are now linked to that iPhone.

If the setup screen does not appear, make sure your iPhone's Bluetooth is turned on. Go to Settings, tap Bluetooth, and toggle it on if it is off. Then try opening the AirPods case near your phone again.

Once paired, your AirPods will automatically connect to your iPhone whenever you open the case and the phone is nearby with Bluetooth on. You do not have to repeat the pairing process each time.

Pairing AirPods with an Android phone

Open your AirPods case. Hold the button on the back of the case for about 15 seconds until the light inside the case starts flashing white. This puts the AirPods into pairing mode. On your Android phone, go to Settings, then Bluetooth, and make sure Bluetooth is turned on.

Look for your AirPods in the list of "Available devices" — they will show up as "AirPods" or sometimes "AirPods Pro" or "AirPods Max" depending on which model you have. Tap the name to pair them. Your phone will connect and the AirPods will move from "Available devices" to "Paired devices."

Unlike iPhones, Android phones do not show a special setup screen. The pairing happens entirely through the Bluetooth settings menu. Once paired, your AirPods will reconnect to your Android phone automatically when you open the case and Bluetooth is on.

What to do if your AirPods do not appear in Bluetooth settings

If you hold the button on the back of the case for 15 seconds but your AirPods do not show up in your phone's Bluetooth list, they may already be paired to another device. AirPods can only pair with one phone at a time, so if they are currently connected to a laptop, tablet, or another phone, you must unpair them first.

To unpair AirPods from another device, go to that device's Bluetooth settings, find the AirPods in the list of paired devices, and tap "Forget" or "Remove." Then go back to your new phone, put the AirPods in pairing mode again by holding the back button for 15 seconds, and they should appear in your Bluetooth list.

If they still do not appear, try resetting the AirPods to factory settings. With the case open, hold the button on the back for 15 seconds until the light flashes amber, then white. This erases all pairings and returns the AirPods to a blank state. Then put them in pairing mode again by holding the button for another 15 seconds until the light flashes white.

Reconnecting AirPods to a phone you have used before

If your AirPods were already paired to your phone in the past, they will reconnect automatically the next time you open the case near that phone. You do not need to go through the pairing process again. Your phone remembers the AirPods and they remember your phone.

If your AirPods do not reconnect automatically, make sure Bluetooth is turned on in your phone's settings. If Bluetooth is on but the AirPods still do not connect, try closing the case for 10 seconds, then opening it again. This sometimes resets the connection attempt.

Switching AirPods between multiple phones

AirPods can be paired to multiple phones at the same time, but they can only play audio from one phone at a time. Once you pair them to a second phone, they stay paired to the first phone too. When you open the case near either phone, the AirPods will try to connect to whichever one they were most recently used with.

If you want to switch which phone your AirPods are connected to, open the case near the phone you want to use them with and wait a few seconds. The AirPods will disconnect from the other phone and connect to the new one. You do not have to unpair or forget them.

If you want to remove the AirPods from one of your phones entirely, go to that phone's Bluetooth settings, find the AirPods in the list of paired devices, and tap "Forget." They will no longer automatically connect to that phone, but they will still be paired to your other devices.

Frequently Asked Questions

Why do my AirPods keep connecting to the wrong device?

AirPods connect to whichever paired device is closest and has Bluetooth on. If you have multiple phones or a laptop nearby, they may connect to the one you did not intend. Turn off Bluetooth on the devices you are not using, or move them farther away. You can also manually disconnect the AirPods from a device by going to its Bluetooth settings and tapping "Disconnect."

Can I use the same AirPods with both an iPhone and an Android phone?

Yes. Pair them to your iPhone first, then pair them to your Android phone. They will stay paired to both. When you open the case, they will connect to whichever device is closest with Bluetooth on. You can switch between them by turning Bluetooth off on one device and on on the other.

What does the flashing light on the AirPods case mean?

A white flashing light means the AirPods are in pairing mode and ready to connect to a new device. An amber flashing light means you held the button too long and the AirPods are resetting to factory settings. A solid white light means they are already paired and connected.

Do I need to charge my AirPods before pairing them?

AirPods should have some battery to enter pairing mode, but they do not need to be fully charged. If your AirPods are completely dead, charge them in the case for at least 15 minutes before trying to pair them.

Why does my phone keep asking me to pair my AirPods even though I already did?

This usually means your phone forgot the pairing, often because the AirPods were reset or paired to another device in between. Go to your phone's Bluetooth settings, find the AirPods in the list, and tap "Forget." Then put the AirPods in pairing mode again and pair them fresh.