The basic steps to pair AirPods with an iPad

Open the lid of your AirPods case near your iPad. Your iPad will detect them automatically and show a pairing screen with an image of the AirPods. Tap Connect on that screen. Your iPad will then ask you to name the AirPods (you can keep the default name or change it) and confirm which services you want to use them for — usually Siri, phone calls, and audio. Tap Done when finished. The AirPods are now paired to your iPad.

The entire process takes about 30 seconds. After the first pairing, your AirPods will reconnect to your iPad automatically whenever you open the case near it, as long as Bluetooth is turned on. You do not need to repeat the pairing steps.

If the pairing screen does not appear, make sure Bluetooth is on. Go to Settings > Bluetooth and toggle it on if it is off. Then try opening the AirPods case again.

Key Takeaways

  • Open your AirPods case within a few inches of your iPad and tap Connect on the pairing screen that appears.
  • Your iPad stores the pairing information, so AirPods reconnect automatically the next time you open the case nearby.
  • If no pairing screen appears, check that Bluetooth is enabled in Settings.
  • You can pair the same AirPods to multiple Apple devices, but they will only connect to one device at a time unless you manually switch them.
  • If pairing fails, forget the AirPods in Bluetooth settings and try again from the beginning.

What to do if the pairing screen does not appear

If you open the AirPods case and no pairing prompt shows up on your iPad, the most common reason is that Bluetooth is off. Go to Settings > Bluetooth and make sure the toggle is blue (on). Wait a few seconds, then open the AirPods case again near your iPad.

If Bluetooth is already on and the pairing screen still does not appear, your AirPods may already be paired to another device. AirPods remember the last device they connected to and will try to reconnect there first. Hold down the button on the back of the AirPods case for about 15 seconds until the light inside flashes white. This resets the AirPods to pairing mode. Now open the case near your iPad again.

If the pairing screen appears but then disappears without connecting, move your iPad closer to the AirPods case. Bluetooth works best within about 30 feet, but pairing is more reliable when the devices are within a few feet of each other.

Pairing the same AirPods to multiple Apple devices

You can pair one set of AirPods to your iPad, iPhone, Mac, and Apple Watch all at once. Each device stores the pairing information separately. However, the AirPods will only actively connect to one device at a time — whichever one you last used them with.

To switch which device your AirPods connect to, open the AirPods case near the device you want to use. Your AirPods will detect it and reconnect. Alternatively, go to Settings > Bluetooth on the device you want to use, find your AirPods in the list, and tap them to connect.

If you want to pair your AirPods to a different iPad or a non-Apple device, you will need to forget them from your current iPad first. Go to Settings > Bluetooth, find your AirPods in the list, tap the i icon next to them, and select Forget This Device. Then follow the initial pairing steps with the new device.

Checking the battery level of your AirPods

Your iPad shows the battery level of your AirPods in two places. The quickest way is to open the AirPods case near your iPad — a battery widget will appear on your lock screen or home screen showing the charge level of each earbud and the case. You can also check the battery in Settings > Bluetooth, find your AirPods, and tap the i icon to see the percentage for each earbud and the case.

If your AirPods are not showing a battery level, they may not be properly paired or Bluetooth may be off. Confirm that Bluetooth is on and that your AirPods appear in the Bluetooth device list.

Troubleshooting connection problems after pairing

If your AirPods were paired successfully but now will not connect to your iPad, first check that Bluetooth is on. Then open the AirPods case near your iPad and wait 10 seconds. The AirPods should reconnect automatically.

If they still do not connect, restart your iPad. Hold the top button and either volume button until the power-off slider appears, then slide to power off. Wait 30 seconds, then hold the top button again until the Apple logo appears. Once your iPad restarts, open the AirPods case near it again.

If restarting does not work, forget the AirPods and pair them again from scratch. Go to Settings > Bluetooth, tap the i icon next to your AirPods, and select Forget This Device. Then open the AirPods case near your iPad and follow the initial pairing steps.

Using AirPods with iPad apps and services

Once paired, your AirPods work with any app that plays audio — Music, Podcasts, YouTube, Zoom, FaceTime, and others. Audio automatically routes to your AirPods when they are connected and in your ears. If you remove them, audio pauses on most apps. Put them back in and audio resumes.

You can also use AirPods to control playback without looking at your iPad. Double-tap either earbud to play or pause. On newer AirPods models, you can customize what a double-tap does — go to Settings > Bluetooth, tap the i icon next to your AirPods, and scroll to Double-Tap on Left or Double-Tap on Right to change the action.

Siri also works with AirPods. Say "Hey Siri" to set up voice control, then ask Siri to play a song, check the weather, or perform other tasks. Make sure Siri is enabled in Settings > Siri & Search.

Frequently Asked Questions

Can I use AirPods with a non-Apple tablet?

AirPods work with any device that supports Bluetooth, including Android tablets and Windows devices. However, some features like automatic pairing and battery display may not work. Pairing is manual — go to your device's Bluetooth settings, put the AirPods in pairing mode by holding the back button for 15 seconds, and select them from the device list.

Why do my AirPods keep disconnecting from my iPad?

Disconnections usually happen when Bluetooth is turned off, when the AirPods are too far away, or when they are trying to connect to another device at the same time. Keep Bluetooth on, stay within 30 feet of your iPad, and make sure your AirPods are not actively paired to another device that is nearby and powered on.

Do I need to unpair my AirPods before giving them to someone else?

Yes. Go to Settings > Bluetooth, tap the i icon next to your AirPods, and select Forget This Device. Then reset the AirPods by holding the back button for 15 seconds until the light flashes white. The new owner can then pair them to their device.

What if my AirPods are paired but I cannot hear audio?

Check that the volume on your iPad is not muted or turned all the way down. Swipe down from the top right to open Control Center and adjust the volume slider. Also confirm that audio is actually playing — some apps require you to press play. If audio still does not come through, try disconnecting and reconnecting the AirPods in Bluetooth settings.