The basic path: put AirPods in pairing mode, then find them in your computer's Bluetooth settings
AirPods connect to a PC the same way they connect to an iPhone — your computer searches for the AirPods' Bluetooth signal, finds them, and remembers the pairing. The difference is that AirPods default to pairing with Apple devices first, so you have to manually tell them to listen for a Windows or Mac computer instead. Once you do, the connection is permanent and happens automatically the next time you open the case near that computer.
The process takes about two minutes and requires nothing but the AirPods themselves and your computer. You do not need iTunes, an Apple account, or any software beyond what your computer already has.
Key Takeaways
- AirPods enter pairing mode when you hold the button on the back of the case for three seconds until the light flashes white, not amber.
- On a Mac, open System Settings, click Bluetooth, and select your AirPods from the list; on Windows 10 or 11, go to Settings, then Devices, then Bluetooth and other devices.
- After the first pairing, your AirPods will connect automatically whenever you open the case near that computer, as long as Bluetooth is on.
- If your AirPods keep disconnecting or won't show up in the list, forget the device and start the pairing process over from the beginning.
How to put AirPods in pairing mode on Windows or Mac
Open the AirPods case but do not take the AirPods out yet. On the back of the case, you will see a small circular button. Hold that button down for three seconds. The light on the front of the case will flash amber first, then white. When it turns white, release the button — your AirPods are now in pairing mode and will stay that way for about 15 seconds while your computer searches for them.
The amber light means the AirPods are charging or already paired to another device. The white flashing light means they are ready to pair with something new. If the light goes back to amber before you finish the next step, hold the button again until white appears.
Connecting on a Mac computer
Click the Apple menu in the top-left corner of your screen and select System Settings. In the sidebar on the left, click Bluetooth. Your Mac will begin searching for nearby Bluetooth devices. Within a few seconds, your AirPods should appear in the list with the name "AirPods" or "AirPods [Your Name]" if you have named them before.
Click the AirPods name in the list. A window will pop up asking you to confirm the connection. Click Connect. Your Mac will pair with the AirPods and remember them from that point forward. You should see "Connected" next to the AirPods name in the Bluetooth menu.
If you do not see your AirPods in the list after 15 seconds, the pairing mode timed out. Go back to the case, hold the button again until the light flashes white, and try the Mac steps again.
Connecting on a Windows 10 or 11 computer
Click the Start button in the bottom-left corner and type "Bluetooth settings" into the search box. Click the result that says "Bluetooth and other devices settings." Windows will open a window showing your Bluetooth devices and a button that says "Add device" or "Add Bluetooth or other device" depending on your Windows version.
Click that button. A new window will appear asking what type of device you want to add. Select "Bluetooth." Windows will begin searching for nearby devices. Your AirPods should appear in the list within a few seconds. Click them to select them, then click Pair or Connect. Windows will confirm the pairing and show "Connected" next to the AirPods name.
If the AirPods do not appear after 15 seconds, the pairing mode has expired. Go back to the case, hold the button until the light flashes white again, and repeat the Windows steps.
What to do if your AirPods do not show up in the list
The most common reason AirPods do not appear is that pairing mode timed out before your computer found them. Hold the button on the case for three seconds again until the light flashes white, and when ready go back to your Bluetooth settings. Do not wait — start the search right away.
If they still do not appear, make sure Bluetooth is turned on for your computer. On a Mac, click the Bluetooth icon in the top-right corner of the menu bar and make sure it says "Bluetooth: On." On Windows, go back to Bluetooth settings and check that the toggle at the top says "On." Also make sure your AirPods have a charge — if the case battery is very low, the AirPods may not have enough power to broadcast their signal.
If Bluetooth is on and the AirPods still will not appear, try moving them closer to your computer. Bluetooth works best within about 30 feet, but obstacles like walls or metal can reduce that range. Move the case to the same room as your computer and try again.
Automatic connection after the first pairing
Once you have paired your AirPods with your computer, they will connect automatically every time you open the case near that computer, as long as Bluetooth is turned on. You do not have to go back into settings or hold any buttons. Just open the case and wait a few seconds — your computer will recognize the AirPods and connect.
If your AirPods are already connected to another device (like your iPhone), they may take a few extra seconds to switch to your computer. This is normal. If they do not switch after 10 seconds, manually disconnect them from the other device first, then open the case near your computer.
Fixing AirPods that keep disconnecting or reconnecting
If your AirPods disconnect randomly or keep reconnecting over and over, the pairing has usually become corrupted. The fastest fix is to forget the device and pair them again from scratch. On a Mac, open Bluetooth settings, find your AirPods in the list, click the X or "Remove" button next to them, and confirm. On Windows, go to Bluetooth settings, find your AirPods, click them, and select "Remove device."
After you have removed them, put your AirPods back in pairing mode by holding the button on the case for three seconds until the light flashes white. Then go through the pairing steps for your computer again. This usually solves disconnection problems. If the problem continues after re-pairing, try moving your computer and AirPods away from other wireless devices like routers, microwaves, or cordless phones — these can interfere with Bluetooth signals.
Frequently Asked Questions
Can I connect the same AirPods to both a Mac and a Windows PC?
Yes. Pair them to your Mac first, then put them back in pairing mode and pair them to your Windows computer. Your AirPods will remember both computers. When you open the case near either one, they will connect to whichever device you used most recently. If you want to switch to the other device, disconnect them from the current one first.
Why do my AirPods keep connecting to my iPhone instead of my computer?
AirPods prioritize Apple devices by default. If your iPhone is nearby and turned on, your AirPods will connect to it first. To use them with your computer, turn off Bluetooth on your iPhone or move it to another room. Once your AirPods connect to your computer, you can turn your iPhone's Bluetooth back on — they will stay connected to your computer until you manually switch them.
Do I need to pair my AirPods every time I use my computer?
No. After the first pairing, your computer remembers your AirPods. Opening the case near your computer will reconnect them automatically. You only need to pair them once per device.
What if I forgot which computer my AirPods are paired to?
Open the case near the computer you want to use them with. If they connect automatically, that is the computer they are paired to. If they do not connect, put them in pairing mode and pair them to that computer. You can pair the same AirPods to multiple computers without removing the old pairing first.
Can I use AirPods with a Windows laptop that does not have Bluetooth built in?
No, not without a separate Bluetooth adapter. AirPods only work with devices that have Bluetooth hardware. If your Windows laptop does not have Bluetooth, you can buy a small USB Bluetooth adapter for about 15 to 30 dollars and plug it into a USB port. Once installed, your computer will treat it as built-in Bluetooth and you can pair your AirPods normally.