The basic steps to pair a universal remote
Most universal remotes connect to a TV in one of two ways: by learning the TV's infrared signal, or by entering a manufacturer code. The method depends on which type of universal remote you have. If your remote has a Setup, Code, or Pairing button, you'll use the code method first. If it doesn't, you'll use the learning method to teach the remote your TV's commands.
Before you start, have your TV's manual or the remote's instruction booklet nearby — you'll need either the TV manufacturer name or a specific code number. Most universal remotes come with a printed code list or a companion app that lists codes by brand.
The whole process usually takes five to ten minutes. If the code method doesn't work, the learning method will, though it requires more steps.
Key Takeaways
- Universal remotes connect by entering a manufacturer code or by learning your TV's infrared signals one button at a time.
- The code method is faster and works if you know your TV's brand; the learning method works on any TV but takes longer.
- You need to point the remote at the TV during setup, and the TV must be powered on for the learning method to work.
- If neither method works, check that your TV's infrared receiver is not blocked and that the remote has fresh batteries.
Using the code method to set up your remote
Start by turning on your TV. Hold down the Setup or Code button on your remote until the LED light blinks twice, then release. This puts the remote into code-entry mode.
Look up your TV's manufacturer code in the remote's manual or on the manufacturer's website. For example, Samsung TVs might use code 0060, while LG TVs might use 0178. Enter this code using the number buttons on the remote. The LED should blink twice when you've entered it correctly.
Point the remote at your TV and press the Power button. If the TV turns off, the code worked and your remote is now paired. If the TV doesn't respond, try the next code listed for your brand — many manufacturers have multiple codes depending on the TV model year.
Once the power button works, test the volume and channel buttons to confirm the rest of the remote is responding. If some buttons work and others don't, you may need to try a different code or switch to the learning method.
Using the learning method when codes don't work
The learning method teaches your universal remote to copy the infrared signals from your TV's original remote. You'll need both remotes for this process. Turn on your TV and make sure it's in a well-lit room so you can see the LED on the universal remote clearly.
Press and hold the Setup button on the universal remote until the LED blinks twice. Then press the button you want to program — start with Power. The LED should stay on steadily, indicating the remote is ready to learn.
Point your TV's original remote directly at the universal remote's infrared receiver (usually a small lens on the front). Press the corresponding button on the original remote — in this case, Power. Hold it for about one second. The universal remote's LED should blink twice, confirming it received the signal.
Repeat this process for each button you want to program: volume up, volume down, channel up, channel down, and any others you use regularly. Most people program at least eight to ten buttons. After you've programmed all the buttons you need, press Setup again to exit learning mode.
Troubleshooting when your remote won't connect
If the code method doesn't work, the most common reason is that you entered the wrong code for your TV model. Go back through the code list and try each one for your brand, testing the power button after each entry. Some brands have ten or more codes depending on the TV's age and features.
If the learning method isn't working, check that the infrared receiver on both remotes is clean and unobstructed. Dust or a protective case can block the signal. Also confirm that your TV's original remote has working batteries — a weak signal won't transfer properly to the universal remote.
Make sure you're pointing the original remote directly at the universal remote during learning, not at the TV. The universal remote needs to receive the signal, not the TV. If the LED on the universal remote doesn't blink after you press a button on the original remote, move the remotes closer together and try again.
If your TV has an infrared receiver on the back or side instead of the front, you may need to angle the original remote toward that location. Some older TVs have receivers in multiple spots.
What to do after your remote is paired
Once your remote is working, test it from different distances and angles to make sure the signal reaches your TV reliably. Most infrared remotes work from up to 30 feet away, but obstacles like furniture or thick curtains can reduce the range.
If you programmed only a few buttons and want to add more later, you can return to learning mode and program additional buttons without erasing the ones you already set up. Just follow the learning method steps again for the new buttons.
Keep your TV's original remote in a safe place. If your universal remote stops working or you need to reprogram it, you'll need the original remote to use the learning method again.
Universal remotes with app-based pairing
Some newer universal remotes, particularly those designed for smart TVs, use a companion app instead of physical buttons for setup. read the app to your smartphone, select your TV brand, and follow the on-screen prompts. The app will guide you through entering codes or learning signals.
App-based remotes often store multiple TV codes and let you switch between devices without manual reprogramming. They also typically work over WiFi or Bluetooth instead of infrared, which means they can control your TV even if there's an obstacle in the way.
If you're using an app-based remote, make sure your phone and TV are on the same WiFi network. The app will usually prompt you to confirm this before pairing begins.
Frequently Asked Questions
Do I need the original remote to set up a universal remote?
Only if you're using the learning method. The code method works with just the universal remote and your TV. If codes don't work, you'll need the original remote to teach the universal remote your TV's signals.
Can I use a universal remote on multiple TVs?
Yes. Most universal remotes can store codes for several devices. Enter the code for your first TV, then press a different device button (like TV or Device 1) and enter the code for your second TV. Switch between them by pressing the device button before using the remote.
Why does my remote work sometimes but not always?
The most common cause is weak batteries. Replace them with fresh ones and test again. If that doesn't help, check that nothing is blocking the infrared receiver on your TV — even a small object can interrupt the signal at certain angles.
What if my TV brand isn't in the code list?
Use the learning method instead. It works on any TV regardless of brand. You'll need your TV's original remote, but you won't need a code number.
Can I program buttons that my TV's original remote doesn't have?
No. The learning method can only copy signals that your TV's original remote sends. If your original remote doesn't have a button, the universal remote can't learn that function.