The basic connection: HDMI cable and dock

A Nintendo Switch connects to a TV through an HDMI cable that runs from the dock to an HDMI port on your TV. The dock is the rectangular stand that came in the box with your Switch. You plug the USB-C power adapter into the back of the dock, then slide the Switch tablet into the front of the dock while it's docked. The HDMI cable carries both picture and sound to your TV at the same time.

This is a wired connection, not a wireless one — the Switch does not use Bluetooth to talk to your TV. The dock handles all the translation between the Switch's internal display and what your TV can show. Once the Switch is in the dock and the HDMI cable is plugged in, your TV should display the Switch home screen within a few seconds.

Key Takeaways

  • The Switch connects to a TV through a single HDMI cable that runs from the dock to your TV's HDMI port, not through Bluetooth or wireless pairing.
  • The dock must be plugged into power with the USB-C adapter that came in the box, or it will not send a signal to the TV.
  • You need to select the correct HDMI input on your TV using the remote or input button, because most TVs have multiple HDMI ports.
  • If you see no picture, check that the HDMI cable is fully inserted on both ends and that your TV is set to the right input channel.

Step-by-step setup for your first connection

Start by locating an HDMI port on the back or side of your TV. Most TVs have two to four HDMI ports, and they are usually grouped together. Look for a port labeled HDMI 1, HDMI 2, or similar. Write down which port number you use, because you will need to tell your TV to display that input.

Take the HDMI cable from the dock box and plug one end into the HDMI port on your TV. Plug the other end into the HDMI port on the back of the dock. The cable should click into place on both ends. Now plug the USB-C power adapter into the power port on the back of the dock, and plug the adapter into a wall outlet or power strip. You should see a light turn on inside the dock.

Slide the Switch tablet into the dock from the front, with the screen facing toward you. It should slide down smoothly and rest inside the dock. Do not force it. The Switch will recognize that it is docked and will send its display to the TV automatically. Now pick up your TV remote and press the Input or Source button. A menu will appear showing all available HDMI ports. Select the HDMI port number where you plugged in the cable. Your TV should now show the Switch home screen.

What to do if your TV shows no picture

The most common reason for a blank screen is that your TV is not set to the correct HDMI input. Press the Input or Source button on your TV remote again and cycle through each HDMI port one at a time until you see the Switch home screen appear. Some TVs label these as HDMI 1, HDMI 2, and so on. Others use names like HDMI (TV), HDMI (Blu-ray), or HDMI (Game). Try each one.

If you still see nothing, check that the HDMI cable is fully inserted on both the TV end and the dock end. Push it in firmly until you hear a click. Then check that the power adapter is plugged into the dock and into a working wall outlet. The dock should have a light on inside it. If there is no light, the dock is not receiving power and will not send a signal.

If the dock has power and the HDMI cable is fully inserted but you still see no picture, try unplugging the HDMI cable from the dock, waiting ten seconds, and plugging it back in. Sometimes the connection needs to be reset. If this does not work, the HDMI cable or dock may be damaged and may need to be replaced.

Using a TV without an HDMI port

Older TVs sometimes have only composite video ports (red, white, and yellow plugs) or component video ports (red, green, and blue plugs) instead of HDMI. The Switch dock does not support these older connection types. You have two options: use an HDMI-to-composite converter box, or connect the Switch to a different TV that has HDMI ports.

An HDMI-to-composite converter is a small box that accepts an HDMI cable on one end and outputs composite video on the other. These are sold online and in electronics stores for $15 to $40. Plug the HDMI cable from the dock into the converter, then plug the composite cables from the converter into your TV's composite ports. The picture quality will be lower than a direct HDMI connection, but the Switch will display on your TV.

Removing the Switch from the dock safely

To take the Switch out of the dock, hold the dock steady with one hand and gently pull the Switch tablet upward. It should slide out smoothly. Do not twist or rock it side to side, because this can damage the USB-C port on the bottom of the Switch. Once the Switch is out of the dock, the TV will go blank.

You can leave the dock plugged in and connected to the TV all the time. The dock does not use much power when the Switch is not in it. When you want to play on the TV again, just slide the Switch back in, and the picture will return within a few seconds.

Troubleshooting sound problems

If you see the Switch picture on your TV but hear no sound, check that your TV's volume is not muted. Press the volume up button on your TV remote. If you still hear nothing, go to the Switch home screen and press the X button to open System Settings. Scroll down to System and select Audio. Make sure the volume is not set to 0. If it is, use the arrow buttons to turn it up.

If the Switch volume is turned up but you still hear no sound, check that your TV is not set to a different audio input. Some TVs have separate audio and video inputs. Press the Input button on your TV remote and look for an audio input option. Select the HDMI port you are using. If your TV has a separate audio menu, make sure it is set to HDMI as well, not to an antenna or other source.

When to use handheld mode instead of docking

The Switch has a built-in screen, so you do not have to use the dock at all. You can play games on the Switch tablet itself without connecting it to a TV. This is called handheld mode. Use handheld mode when you want to play in bed, on a couch, or anywhere away from the TV. Use docked mode when you want a larger screen or when you want to play with a wireless controller instead of holding the tablet.

You can also use tabletop mode, where you prop the Switch up on its kickstand and detach the controllers on either side. This works on any flat surface and does not require a TV or dock. Choose whichever mode fits what you are doing at the moment.

Frequently Asked Questions

Can I use any HDMI cable, or does it have to be the one that came with the Switch?

Any standard HDMI cable will work. The cable that came with your Switch is not special. If you lose it or it gets damaged, you can buy a replacement HDMI cable at any electronics store for $5 to $15. Make sure it is labeled as an HDMI cable, not a mini-HDMI or micro-HDMI cable.

What if my TV has only one HDMI port and I already have something else plugged into it?

You can buy an HDMI splitter or HDMI switch box that lets you plug multiple devices into one HDMI port. These cost $15 to $30 and let you switch between devices using a button on the box. Alternatively, you can unplug the other device when you want to use the Switch, then plug it back in when you are done.

Does the Switch dock charge the battery while it is docked?

Yes. When the Switch is in the dock and the dock is plugged into power, the Switch battery charges automatically. It takes about three to four hours to fully charge a completely dead battery. You can play games while the Switch is charging in the dock.

Can I connect the Switch to a TV wirelessly without the dock?

No. The Switch does not have wireless HDMI or AirPlay capability. You must use the dock and an HDMI cable to display the Switch on a TV. The only wireless connection the Switch makes is to controllers and headphones, which use Bluetooth.

Why does my picture look blurry or pixelated on the TV?

This usually means the HDMI cable is not fully inserted or is damaged. Try unplugging the cable from both ends and plugging it back in firmly. If the picture is still blurry, try a different HDMI cable. If the picture is clear but the TV is showing black bars on the sides, check your TV's picture settings — some TVs have a zoom or aspect ratio setting that needs to be adjusted.