The basic pairing process takes two to three minutes
A new Firestick remote pairs to your device through Bluetooth, the same wireless standard you learned about in the pairing guide. The remote and Firestick find each other automatically when you hold the remote close to the device and press a button — you do not need to enter codes or dig through menus. Most of the time, pairing happens before you even realize it is happening.
The process differs slightly depending on whether you are pairing a remote that came in the box with your Firestick, a replacement remote you bought separately, or a remote that was previously paired to a different device. Each route takes roughly the same amount of time, but the steps are not identical.
Key Takeaways
- Hold a new remote within 6 inches of your Firestick device and press any button to start pairing — the remote will connect automatically without entering a PIN.
- If pairing fails, restart both the remote and the Firestick by unplugging the device for 30 seconds, then try again from the beginning.
- A remote that was previously paired to another Firestick must be unpaired from that device first, or you can factory reset the remote by holding Home and Back for 10 seconds.
- The Firestick will display a pairing confirmation message on your TV screen when the connection succeeds.
- If your remote still will not pair after a restart, check that Bluetooth is enabled on your Firestick and that the remote has fresh batteries.
Pairing a remote that came with your Firestick
If you are setting up a brand-new Firestick for the first time, the remote usually pairs automatically during the initial setup. The Firestick enters pairing mode when you first power it on, and the remote enters pairing mode when you press any button. They find each other without any action on your part.
If the remote does not pair during setup, hold it within 6 inches of the Firestick device itself — not the TV — and press the Home button. Wait 10 to 15 seconds. The Firestick screen will show a message saying the remote is connected. If nothing happens after 15 seconds, move closer to the device and try again.
Pairing a replacement remote to an existing Firestick
When you buy a new remote separately and want to use it with a Firestick you already own, the pairing process is the same as above: hold the remote 6 inches from the device and press Home. The Firestick will recognize it as a new remote and pair automatically.
Before you do this, make sure your old remote is not actively connected. If both remotes are paired to the same Firestick at the same time, they will both work, but the Firestick may respond unpredictably to button presses from either one. If you want to use only the new remote, unpair the old one first by going to Settings > Remotes and Bluetooth Devices > Your Devices, selecting the old remote, and choosing Unpair.
Unpairing a remote from a different Firestick before reusing it
A remote that was previously paired to another Firestick will not pair to a new device until you break the old connection. Bluetooth remotes stay paired to their last device until you explicitly unpair them, even if that device is in another room or no longer in use.
You have two options. The first is to go back to the original Firestick, navigate to Settings > Remotes and Bluetooth Devices > Your Devices, select the remote, and choose Unpair. The second is to factory reset the remote itself by holding the Home button and the Back button together for 10 seconds until the light on the remote blinks. After a factory reset, the remote will pair to any Firestick you hold it near.
What to do if pairing fails
If the remote does not show a pairing message after 15 seconds, the first step is to restart both devices. Unplug your Firestick from power for 30 seconds, then plug it back in. While the Firestick is restarting, remove the batteries from the remote for 10 seconds, then reinsert them. Once the Firestick has finished booting — you will see the home screen on your TV — hold the remote 6 inches from the device and press Home again.
If pairing still fails, check two things. First, make sure Bluetooth is turned on in your Firestick settings. Go to Settings > Remotes and Bluetooth Devices and confirm that Bluetooth is enabled. Second, check that the remote has fresh batteries. A remote with low batteries may not have enough power to complete the pairing handshake, even if it seems to work for other tasks.
If the remote pairs but then disconnects when ready, or if it pairs but does not respond to button presses, the remote may be too far from the Firestick during normal use. Bluetooth has a range of about 30 feet in open space, but walls, metal objects, and other wireless devices can reduce that range significantly. Try moving closer to the Firestick and see if the remote responds.
Pairing multiple remotes to the same Firestick
You can pair more than one remote to a single Firestick. This is useful if you have a remote in the living room and another in the bedroom, or if you want a backup remote in case one breaks. Each remote pairs the same way: hold it 6 inches from the device and press Home.
The Firestick will accept input from any paired remote at any time. If two people press buttons on different remotes simultaneously, the Firestick will respond to whichever button press it receives first, which is usually imperceptible. For most households, having two or three remotes paired to the same device causes no problems.
Frequently Asked Questions
Do I need to enter a PIN or code to pair a Firestick remote?
No. Firestick remotes use Bluetooth pairing without a PIN. You straightforward hold the remote near the device and press a button. If a menu asks you to enter a code, you are likely in the wrong settings menu — go back and try the pairing process again from the beginning.
How close does the remote need to be to the Firestick to pair?
Within 6 inches is the safest distance. Pairing may work from farther away, but staying close ensures the Bluetooth signal is strong enough to complete the handshake without errors. Once pairing is done, you can use the remote from anywhere in the room.
Can I use a Firestick remote with a different streaming device?
No. Firestick remotes are designed to pair only with Firestick devices. They use a proprietary Bluetooth protocol that other devices do not recognize. If you need a remote for a different device, you will need a remote made for that device.
What happens if I pair the same remote to two different Firesticks?
The remote will only work with the device it is currently paired to. If you want to use the same remote with a second Firestick, you must unpair it from the first device first. A remote cannot maintain an active connection to two devices at the same time.
Why does my remote keep disconnecting from the Firestick?
The most common cause is low battery power. Replace the batteries and try again. If the remote still disconnects, move closer to the Firestick — something may be blocking the Bluetooth signal. If disconnections happen only in certain rooms, the Firestick may be too far away or there may be interference from another wireless device like a microwave or cordless phone.