Wired mice plug in and work when ready; wireless mice need pairing first

A wired mouse connects through a USB port on your PC and starts working as soon as you plug it in — no setup required. A wireless mouse uses either a small USB receiver (called a dongle) that you plug into your PC, or Bluetooth built into your computer. Bluetooth mice pair once and then reconnect automatically when you turn them on, while dongle mice work the moment the receiver is plugged in.

The choice between wired and wireless comes down to convenience versus cable management. Wired mice never run out of battery and have no lag, but the cable can get in your way. Wireless mice give you freedom to move around, but you need to charge or replace batteries, and they can occasionally lose connection if something blocks the signal between the mouse and your PC.

Key Takeaways

  • Wired USB mice work when ready when plugged into any USB port on your PC with no pairing needed.
  • Wireless mice with a USB dongle work when ready once the receiver is plugged in, with no pairing step.
  • Bluetooth mice require you to put the mouse in pairing mode, then select it from your PC's Bluetooth settings.
  • If a wireless mouse stops responding, check that batteries are installed and charged, and that nothing is blocking the signal path.

Connecting a wired mouse

Find an open USB port on your PC — these are usually on the back of a desktop tower or the sides of a laptop. Plug the mouse cable into the port. Your PC should recognize the mouse within a few seconds, and the cursor will start moving when you move the mouse. No drivers or software installation is needed for standard mice.

If the cursor does not move after 10 seconds, try a different USB port. Some ports on older PCs may not provide enough power, or a port may be damaged. If you have tried two or three different ports and the mouse still does not work, the mouse itself may be faulty.

Connecting a wireless mouse with a USB dongle

Locate the small USB receiver that came with your mouse — it is usually about the size of a thumb drive and may be stored in the battery compartment or a small pocket in the box. Plug the receiver into any open USB port on your PC. The receiver does not need to be in line-of-sight with the mouse, but it should be within 6 to 10 feet and not blocked by metal objects or thick walls.

Insert batteries into the mouse (usually AA or AAA, depending on the model) and turn the mouse on using the power switch on the bottom. The cursor should start moving within a few seconds. If it does not, check that the batteries are installed correctly with the positive and negative ends aligned, and that the mouse power switch is in the ON position.

Dongle-based mice do not require pairing — the receiver and mouse are already paired at the factory. If you lose the receiver, you will need to buy a replacement from the mouse manufacturer, as receivers are not interchangeable between brands.

Connecting a Bluetooth mouse

Insert batteries into the mouse and locate the pairing button — this is usually a small recessed button on the bottom or side of the mouse, sometimes labeled with a Bluetooth symbol. Press and hold the pairing button for 3 to 5 seconds until a light on the mouse starts blinking. This puts the mouse into pairing mode and it will stay there for about 2 to 3 minutes.

On your PC, open the Bluetooth settings. On Windows, right-click the Start button, select Settings, then go to Devices > Bluetooth & devices. On a Mac, open System Settings, then click Bluetooth. Your PC will scan for nearby Bluetooth devices. When your mouse appears in the list, click on it to pair. Your PC may ask you to confirm the pairing — if so, click the confirmation button.

Once paired, the mouse will reconnect automatically whenever you turn it on, as long as Bluetooth is enabled on your PC. You only need to go through the pairing process once per PC. If you want to use the same mouse on a different computer, you will need to pair it again on that computer.

Troubleshooting a mouse that will not connect

For a wired mouse, try a different USB port first — some ports may be disabled or damaged. If the mouse works in a different port, the original port is faulty. If it does not work in any port, the mouse cable or connector may be damaged, or the mouse itself may be defective.

For a wireless dongle mouse, check that batteries are installed and have charge. Replace the batteries with fresh ones if the mouse has not been used in several weeks. Make sure the receiver is plugged into a USB port and that nothing metal or electronic is between the receiver and the mouse — microwaves, cordless phones, and Wi-Fi routers can interfere with the signal. Try moving the receiver closer to the mouse or moving the mouse closer to the receiver.

For a Bluetooth mouse, check that Bluetooth is turned on in your PC settings. If the mouse was previously paired to a different computer, it may still be trying to connect to that computer instead of your current one. Put the mouse back into pairing mode by holding the pairing button for 5 seconds, then try pairing it again to your current PC. If Bluetooth is on but the mouse does not appear in the device list, restart your PC and try again.

When to replace batteries and what to expect

Wireless mice typically run for 3 to 12 months on a set of batteries, depending on how often you use the mouse and the battery capacity. Most mice will show signs of a dying battery by moving slowly or becoming unresponsive for a moment before reconnecting. When this happens, replace the batteries with fresh ones of the same type — usually AA or AAA alkaline batteries, though some mice use rechargeable batteries instead.

If your mouse uses rechargeable batteries, it will come with a charging cable (usually USB-C or Micro-USB) and instructions for charging. Charge the mouse when the cursor starts to lag or the mouse stops responding. Rechargeable mice typically last 1 to 2 weeks per charge depending on use.

Frequently Asked Questions

Can I use a wireless mouse on a PC that does not have Bluetooth?

Yes, if the mouse uses a USB dongle receiver. Dongle-based mice work on any PC with a USB port, regardless of whether Bluetooth is built in. Bluetooth-only mice will not work on a PC without Bluetooth, so check your mouse documentation to see which type you have.

Why does my wireless mouse keep disconnecting?

Check that batteries have charge and are installed correctly. Move the mouse closer to the receiver or Bluetooth antenna — interference from walls, metal objects, or other wireless devices can cause drops. If the mouse is an older model, the receiver or Bluetooth chip may be failing and may need replacement.

Can I pair one Bluetooth mouse to multiple computers?

Yes, but only one at a time. You can pair the same mouse to your work PC, your laptop, and your home desktop, but the mouse will only connect to whichever computer it is currently paired with. To switch, put the mouse into pairing mode again and pair it to the new computer.

Do I need to install software or drivers for a mouse to work?

No, for standard mice. Windows and Mac both include built-in drivers for basic mouse functions like movement and clicking. Some gaming or specialty mice come with software that adds extra buttons or adjusts sensitivity, but this is optional — the mouse will work without it.

What is the difference between a mouse and a trackpad?

A mouse is a separate device you move with your hand to control the cursor. A trackpad is a flat surface built into a laptop that you touch with your finger to move the cursor. You can use a mouse with a laptop even though it has a trackpad, and some people use both at the same time.