The basic connection process

A Microsoft Bluetooth mouse connects to your computer in three steps: turn on the mouse, put it in pairing mode, and select it from your computer's Bluetooth settings. The mouse will then stay connected whenever it is within range and powered on. Most Microsoft mice pair in under a minute and work when ready after.

The exact steps depend on whether you are using Windows, Mac, or a Chromebook, but the principle is the same on all three. Your mouse broadcasts a signal saying "I am here and ready to pair," your computer listens for that signal, and once they find each other, they remember each other for next time.

Key Takeaways

  • Microsoft Bluetooth mice have a dedicated pairing button on the bottom that you press and hold for three to five seconds to enter pairing mode.
  • On Windows, you open Settings, go to Bluetooth & devices, and click "Add device" to see the mouse appear in the list.
  • On Mac, you open System Preferences, select Bluetooth, and click "Set Up New Device" to find the mouse.
  • Once paired, the mouse reconnects automatically when you turn it on, so you only pair it once.
  • If the mouse does not appear in your Bluetooth list, restart both the mouse and the computer, then try pairing again.

Pairing a Microsoft mouse on Windows

Start by turning on the mouse. Most Microsoft Bluetooth mice have a power switch on the bottom or side — flip it to the On position. You should see a light indicator turn on, usually a small LED near the top or bottom of the mouse.

Next, locate the pairing button. On most Microsoft mice, this is a small button on the bottom of the mouse, sometimes labeled with a Bluetooth symbol. Press and hold this button for three to five seconds until the light on the mouse blinks or changes color. This puts the mouse into pairing mode, which lasts about three minutes.

While the mouse is in pairing mode, open Settings on your Windows computer. Click the Start button, type "Bluetooth," and select "Bluetooth and other devices" or "Bluetooth & devices" depending on your Windows version. You should see a section that says "Add device" or a plus icon. Click it.

Windows will search for nearby Bluetooth devices. Your mouse should appear in the list within 10 to 15 seconds, usually showing as "Microsoft Mouse" or a model number like "Microsoft Bluetooth Mouse 5000." Click on it. Windows will pair automatically, and you should see a confirmation message saying the device is connected.

Pairing a Microsoft mouse on Mac

Turn on the mouse and press the pairing button on the bottom for three to five seconds, just as you would on Windows. Wait for the light to blink or change color, indicating pairing mode is active.

On your Mac, click the Apple menu in the top-left corner and select "System Preferences" or "System Settings" depending on your macOS version. Look for "Bluetooth" in the sidebar or search for it using the search box. Click Bluetooth to open the settings.

You should see a button that says "Set Up New Device" or a plus icon. Click it. Your Mac will search for nearby Bluetooth devices. When your Microsoft mouse appears in the list, click it to pair. The process is the same as Windows — your Mac will confirm once the connection is complete.

Pairing a Microsoft mouse on Chromebook

Turn on the mouse and press the pairing button for three to five seconds until the light blinks. Put the mouse into pairing mode just as you would on Windows or Mac.

On your Chromebook, click the time in the bottom-right corner of the screen. A menu will appear. Click the settings icon (it looks like a gear), then select "Connected devices" or "Bluetooth." You should see an option to add a new device. Click it.

Your Chromebook will search for nearby Bluetooth devices. Select your Microsoft mouse from the list when it appears. The Chromebook will pair automatically and show a confirmation message.

What to do if the mouse does not appear

If your mouse does not show up in the Bluetooth list after 15 to 20 seconds, the pairing mode may have timed out. Turn the mouse off, wait five seconds, turn it back on, and press the pairing button again for three to five seconds. Make sure the light is blinking before you try searching on your computer.

If the mouse still does not appear, restart your computer. Bluetooth hardware sometimes needs a restart to detect new devices. After your computer restarts, turn on the mouse, press the pairing button, and search again.

Check that your computer's Bluetooth is actually turned on. On Windows, open Bluetooth settings and look for a toggle switch at the top — it should be blue or in the On position. On Mac, the Bluetooth icon appears in the menu bar at the top of the screen; click it and make sure Bluetooth is on. On Chromebook, the Bluetooth toggle is in the quick settings menu in the bottom-right corner.

After pairing: what happens next

Once your mouse is paired, it will reconnect automatically every time you turn it on, as long as Bluetooth is enabled on your computer. You do not need to pair it again. The mouse will appear in your Bluetooth settings as a connected device, and you can use it when ready.

If you want to use the same mouse on multiple computers, you can pair it with each one separately. The mouse will remember all of them and connect to whichever computer is nearby and has Bluetooth turned on. If the mouse connects to the wrong computer, turn off Bluetooth on that computer or move the mouse out of range.

Battery life on Microsoft Bluetooth mice typically ranges from three months to two years depending on the model. When the battery is low, the mouse may disconnect or move erratically. Replace the batteries or charge the mouse if it has a rechargeable battery. Check your specific model's documentation to see which type it uses.

Unpairing or removing the mouse

If you want to stop using the mouse with a particular computer, you can remove it from Bluetooth settings. On Windows, open Bluetooth settings, find the mouse in the list of connected devices, click on it, and select "Remove device." On Mac, open Bluetooth settings, find the mouse, click the X or Remove button next to it. On Chromebook, open Bluetooth settings, find the mouse, and click the X to disconnect it.

Removing the mouse from one computer does not affect its pairing with other computers. If you want to pair the mouse with a different computer instead, straightforward remove it from the old one and pair it with the new one using the same steps described above.

Frequently Asked Questions

Why does my mouse keep disconnecting?

Disconnections usually happen because the mouse is out of Bluetooth range, the battery is low, or Bluetooth on your computer is turned off. Bluetooth typically works within 30 feet of your computer. Move closer and check that Bluetooth is on. If the battery is low, replace or charge it. If disconnections continue, restart both the mouse and your computer.

Can I pair one Microsoft mouse with multiple computers?

Yes. Pair the mouse with each computer separately using the same pairing button method. The mouse will remember all of them and connect to whichever computer is nearest and has Bluetooth on. If it connects to the wrong computer, turn off Bluetooth on that computer or move the mouse farther away.

What if I lost the pairing button or cannot find it?

The pairing button is almost always on the bottom of the mouse. Look for a small recessed button, sometimes labeled with a Bluetooth symbol. If you cannot locate it, check your mouse's manual or search online for your specific model number. Some older Microsoft mice use a different pairing method — the manual will explain which one yours uses.

Do I need to install software to use a Microsoft Bluetooth mouse?

No. Windows, Mac, and Chromebook all have built-in Bluetooth support and will recognize a Microsoft mouse when ready after pairing. The mouse will work for basic clicking and scrolling without any additional software. Microsoft does offer optional software for some models that adds extra features, but it is not required for the mouse to function.

How do I know if my mouse is in pairing mode?

When you press and hold the pairing button, the light on the mouse will blink or change color — usually it will flash blue or white. This blinking light means the mouse is broadcasting its signal and ready to pair. If the light does not blink after holding the button for five seconds, try again or check that the mouse is powered on.