The basic connection process for Sony headphones

To connect Sony headphones to your phone, tablet, or computer, you put the headphones into pairing mode, then tell your device to find and connect to them. The headphones broadcast a signal that your device picks up, and once they recognize each other, they stay paired — meaning next time you turn on the headphones near that device, they connect automatically without the pairing steps.

The exact steps depend on which Sony model you own, because Sony makes headphones with different button layouts and features. But the core idea is the same: headphones into pairing mode, device finds them, connection happens.

Key Takeaways

  • Most Sony headphones enter pairing mode by holding the power button for 5 to 7 seconds until you see a blinking light, though some models use a dedicated pairing button instead.
  • Your device's Bluetooth settings must be turned on and set to search for new devices before it can find the headphones.
  • Once paired, the headphones and device remember each other, so you only repeat the pairing steps if you want to connect to a different device or reset the headphones.
  • If pairing fails, the most common fix is turning both devices off completely, waiting 10 seconds, and trying again from the start.

Finding the pairing button or power button on your Sony model

Sony headphones have the pairing control in different places depending on the model. Some have a dedicated button labeled with a Bluetooth symbol or marked "Pairing." Others use the power button to do double duty — a short press turns them on, and a longer hold triggers pairing mode.

Check the manual or the Sony support website for your specific model number to know which button to use and how long to hold it. The model number is usually printed on the headphones themselves, often on the inside of the ear cup or on the charging case. If you do not have the manual, searching "Sony [model number] pairing instructions" will show you the exact steps.

Common Sony headphone lines include the WH-1000XM5, WH-CH720, WF-C700N, and LinkBuds, and each one has slightly different button locations. Spending 30 seconds finding the right button now saves you from holding the wrong one for a minute and wondering why nothing is happening.

Turning on Bluetooth on your phone, tablet, or computer

Before your device can find the headphones, Bluetooth must be turned on. On an iPhone, swipe down from the top right corner to open Control Center, then tap the Bluetooth icon until it turns blue. On Android, swipe down twice to open Quick Settings, find Bluetooth, and tap it to turn it on. On a Mac, click the Apple menu, go to System Settings, then Bluetooth. On Windows, click the Start button, go to Settings, then Bluetooth & devices, and toggle Bluetooth on.

Once Bluetooth is on, your device is ready to search for nearby headphones. You will see a list of available devices — this is where your Sony headphones will appear once you put them into pairing mode.

Putting the headphones into pairing mode and selecting them on your device

With Bluetooth turned on in your device's settings, hold the pairing button (or power button, depending on your model) on the Sony headphones for 5 to 7 seconds. You will usually see a blinking light — often blue and white, or just blue — which means the headphones are broadcasting their signal and waiting to be found.

Look at your device's Bluetooth settings. A new device name should appear in the list — it will say something like "Sony WH-1000XM5" or "Sony LinkBuds." Tap or click that name to connect. Your device sends a connection request, the headphones accept it, and within a few seconds the pairing is complete. The light on the headphones will usually stop blinking and stay solid, meaning they are connected.

From this point forward, when you turn on the headphones near that same device, they will connect automatically. You only need to repeat these steps if you want to pair them with a different device, or if you reset the headphones to clear all previous pairings.

What to do if the headphones do not appear in the Bluetooth list

If you held the button for several seconds, saw the light blink, but the headphones still do not show up on your device, the most common cause is that the headphones were already paired to a different device and are trying to reconnect to that one instead of staying in pairing mode.

Turn off the headphones completely, wait 10 seconds, then turn them back on and when ready hold the pairing button again. This time, hold it longer — up to 10 seconds if needed — until you see the light blink in a pattern that looks different from the normal connection light. Some Sony models have a specific "pairing mode" blink that is faster or a different color than the regular connection light.

If the headphones still do not appear, make sure Bluetooth is actually on in your device's settings, not just turned on in Control Center or Quick Settings. Some devices require you to go into the full Bluetooth menu to see the search happen. Also check that your device's Bluetooth is set to search for new devices — on some phones and computers, you may need to click a "Search for devices" or "Add device" button rather than just opening the Bluetooth menu.

Confirming the connection is working

Once the headphones show as connected in your device's Bluetooth settings, play a sound — music, a video, or a voice note — and listen through the headphones. If you hear audio, the connection is working. If you do not hear anything, check that the headphones are not muted (some Sony models have a mute button) and that your device's volume is turned up.

You can also test the microphone if your headphones have one. Make a voice memo or start a voice call, and speak into the headphones. If the other person hears you clearly, the microphone is working too. If audio plays but the microphone does not work, the headphones may be connected but the microphone permission is turned off in your device's settings — check your phone or computer's privacy settings for microphone access.

Pairing the same headphones to a second device

Sony headphones can usually remember multiple devices, but they can only connect to one at a time. To pair them with a second phone, tablet, or computer, put the headphones back into pairing mode the same way you did the first time — hold the pairing button for 5 to 7 seconds until the light blinks — then search for them on the new device and tap the name to connect.

The headphones will now be paired to both devices. When you turn them on, they will try to connect to whichever device they were last connected to. If you want them to connect to the other device instead, turn off Bluetooth on the first device, then turn on the headphones. They will connect to the second device automatically.

Frequently Asked Questions

Why do my Sony headphones keep disconnecting from my phone?

Disconnections usually happen because something is blocking the Bluetooth signal between the headphones and your phone — a wall, another device, or even your body in certain positions. Move closer to your phone and remove any obstacles. If disconnections keep happening even when you are close, try turning off Bluetooth on your phone, waiting 10 seconds, and turning it back on. If the problem continues, the headphones may need to be reset by holding the power button for 10 to 15 seconds until you see a specific reset light pattern — check your model's manual for the exact reset procedure.

Can I connect Sony headphones to multiple devices at the same time?

No, Sony headphones can only play audio from one device at a time, even if they are paired to multiple devices. However, some newer Sony models support a feature called multipoint connection, which means they can stay connected to two devices and automatically switch between them when you take a call or start playing audio on the other device. Check your headphones' manual or the Sony website to see if your model supports this feature.

What if I forgot which device my Sony headphones are currently paired to?

Turn on the headphones near the device you want to use, and they will try to connect automatically if they are already paired to it. If they do not connect, put them into pairing mode and pair them to that device as if it were the first time. Pairing them to a new device does not erase the old pairing — the headphones will remember both devices and connect to whichever one they were last used with.

Do I need to unpair my Sony headphones before selling them or giving them away?

Yes, you should reset the headphones to clear all pairings before handing them to someone else. Hold the power button for 10 to 15 seconds until you see a reset light pattern — usually a rapid blink or a specific color change — then release. The headphones will forget all paired devices and return to factory settings. The new owner can then pair them to their own devices from scratch.