The two ways Logitech wireless mice connect

Logitech wireless mice use one of two connection methods: a USB receiver that plugs into your computer, or Bluetooth that pairs directly with your device. The USB receiver method is more common and works on almost any computer. Bluetooth is built into newer laptops and tablets but requires manual pairing the first time.

The USB receiver is a small dongle about the size of a USB stick. You plug it in, and the mouse connects automatically — no pairing steps needed. Bluetooth mice require you to put the mouse into pairing mode and then select it from your computer's Bluetooth settings, similar to connecting wireless headphones.

Check the bottom of your mouse or the box it came in to see which type you have. If there is a USB receiver in the box, you have a receiver-based mouse. If the box mentions Bluetooth or pairing, you have a Bluetooth mouse.

Key Takeaways

  • USB receiver mice plug in and work when ready without any pairing steps, making them the fastest option if your computer has a free USB port.
  • Bluetooth mice require you to hold down a pairing button on the mouse, then select it from your computer's Bluetooth settings menu.
  • A USB receiver mouse will not work on a computer without a USB port, but Bluetooth works on any device with built-in Bluetooth.
  • If your mouse stops responding, the USB receiver may have fallen out, or the Bluetooth connection may have dropped and needs to be re-paired.

Connecting a Logitech USB receiver mouse

Find the USB receiver that came with your mouse. It is a small rectangular or cylindrical piece, usually white or black, about the size of a lighter. Look in the box your mouse came in, or check the bottom of the mouse itself — some Logitech mice have a compartment that stores the receiver magnetically.

Plug the receiver into any open USB port on your computer. On a desktop, this is usually on the back or front of the tower. On a laptop, it is on the side. The receiver does not need to be close to the mouse — it works from across a room. Wait about three seconds after plugging it in.

Move the mouse. If the cursor moves on your screen, the connection is working. If nothing happens, try unplugging the receiver and plugging it into a different USB port. Some USB ports on older computers or hubs do not provide enough power. Once the mouse works, you are done — no pairing required.

Connecting a Logitech Bluetooth mouse

Turn on your mouse. Most Logitech Bluetooth mice have a power switch on the bottom. Slide it to the on position. Some newer models turn on automatically when you move them.

Find the pairing button on your mouse. This is usually a small button on the bottom or underside, sometimes labeled with a Bluetooth symbol. Press and hold this button for three to five seconds until you see a light blink on the mouse — usually blue or white. The blinking light means the mouse is in pairing mode and searching for your computer.

Open your computer's Bluetooth settings. On Windows, click the Start button, type "Bluetooth settings," and open the Bluetooth & devices menu. On Mac, click the Apple menu, go to System Settings, then Bluetooth. On a Chromebook, click the time in the bottom right, then Settings, then Bluetooth.

Look for your mouse in the list of available devices. Logitech mice usually appear with a name like "Logitech Mouse" or "M705" (the model number). Click on it to pair. Your computer will confirm the connection, and the light on the mouse will stop blinking. The mouse is now connected and will reconnect automatically when you turn it on in the future.

What to do if the mouse does not respond

For a USB receiver mouse, the most common problem is that the receiver has come unplugged. Check that it is firmly seated in the USB port. If it is loose, unplug it completely and plug it back in. If you have multiple USB devices plugged in, try moving the receiver to a different port — sometimes USB hubs or other wireless devices interfere with the signal.

If the receiver is plugged in but the mouse still does not work, check that the mouse has batteries and they are not dead. Open the battery compartment on the bottom of the mouse and look at the batteries. If they look corroded or very old, replace them with fresh ones. Most Logitech mice use AA or AAA batteries.

For a Bluetooth mouse that stops responding, the connection may have dropped. Turn the mouse off and on again. If that does not work, go back to your computer's Bluetooth settings, find the mouse in the list of paired devices, and click "Forget" or "Remove." Then repeat the pairing steps above — hold the pairing button until the light blinks, and select the mouse from your Bluetooth settings again.

Connecting to a second computer

A USB receiver mouse can only connect to one computer at a time. If you want to use the same mouse on a different computer, unplug the receiver from the first computer and plug it into the second. The mouse will work when ready on the new computer.

A Bluetooth mouse can be paired to multiple devices, but it only connects to one at a time. To switch the mouse from one computer to another, turn the mouse off, then turn it on next to the computer you want to use it with. The mouse will reconnect to whichever device it was last paired with. If it does not reconnect automatically, repeat the pairing steps on the new computer.

Logitech Unifying Receiver for multiple devices

Some Logitech mice come with a Unifying Receiver instead of a standard USB receiver. This receiver can connect up to six Logitech wireless devices at the same time — mice, keyboards, and trackpads — all through one USB port. If you have a Unifying Receiver, you can pair a second Logitech mouse to it without unplugging anything.

To pair a second mouse to a Unifying Receiver, press the pairing button on the new mouse for three seconds. Then press the pairing button on the Unifying Receiver itself (usually on the bottom or side). The receiver will search for the mouse and connect it. Both mice will now work on the same computer through the same receiver.

Frequently Asked Questions

Can I use a Logitech wireless mouse without the receiver?

Only if it is a Bluetooth mouse. USB receiver mice require the receiver to work — there is no way to connect them without it. If you have lost the receiver, Logitech sells replacement receivers, but they are specific to each mouse model, so you will need to know your mouse model number to order the right one.

Why does my mouse keep disconnecting?

For USB receiver mice, the receiver may be loose or in a port that is not providing enough power. Try a different USB port, preferably one directly on the computer rather than on a hub. For Bluetooth mice, other wireless devices nearby (like WiFi routers or cordless phones) can interfere with the signal. Move the mouse closer to your computer or move the interfering device farther away.

Do I need to install software to use a Logitech wireless mouse?

No. Both USB receiver and Bluetooth mice work when ready without any software. Your computer recognizes them as a standard mouse. If you want to customize buttons or adjust sensitivity, Logitech offers optional software called Logitech Options, but it is not required for basic use.

Can I pair a Logitech Bluetooth mouse to my phone or tablet?

Yes. The pairing process is the same — hold the pairing button on the mouse until the light blinks, then go to your phone or tablet's Bluetooth settings and select the mouse. This works on iPhones, iPads, Android phones, and Android tablets. The mouse will work with any app that supports a mouse cursor.

What if my computer does not have Bluetooth?

You can only use a USB receiver mouse. If you have a Bluetooth mouse but your computer has no Bluetooth, you can buy a USB Bluetooth adapter (a small dongle that plugs into a USB port) and pair the mouse to that instead. These adapters are inexpensive and work with most Bluetooth mice.