The basic pairing process for Beats Solo 3

Beats Solo 3 connect to your device through Bluetooth pairing, which means you turn on the headphones, hold down the power button until a light flashes, and then select them from your device's Bluetooth menu. The first time you pair them, this process takes about 30 seconds. After that, they reconnect automatically whenever you turn them on and your phone or computer is nearby.

The power button is on the right ear cup. Press and hold it for about 5 seconds until you see a white light flash on the back of that ear cup — this means the headphones are in pairing mode and searching for a device to connect to. On your phone, tablet, or computer, open the Bluetooth settings, wait for "Beats Solo3 Wireless" to appear in the list of available devices, and tap or click it. The headphones will confirm the connection with a voice prompt that says "Connected."

Once paired, the Beats Solo 3 will remember your device. The next time you turn them on, they automatically connect to the last device they were paired with, as long as that device has Bluetooth turned on and is within range — typically about 30 feet in an open space.

Key Takeaways

  • Hold the power button on the right ear cup for 5 seconds until the white light flashes to enter pairing mode.
  • Open Bluetooth settings on your phone, tablet, or computer and select "Beats Solo3 Wireless" from the available devices list.
  • After the first pairing, the headphones automatically reconnect to that device whenever you turn them on.
  • You can pair the Beats Solo 3 to multiple devices, but they will only actively connect to one at a time.
  • If the headphones do not appear in your Bluetooth list, turn them off and on again, then hold the power button for 10 seconds instead of 5.

Pairing with an iPhone or iPad

On an iPhone or iPad, go to Settings, tap Bluetooth, and make sure Bluetooth is turned on. The Beats Solo 3 should appear under "Other Devices" within a few seconds of entering pairing mode. Tap the name to connect. Once connected, they will move to the "My Devices" section and show a blue checkmark.

If you have an Apple ID and are signed into iCloud on your iPhone, the headphones may pair automatically to your other Apple devices — your iPad, Mac, or Apple Watch — without you having to repeat the pairing process on each one. This is called Handoff, and it works because all your devices share the same iCloud account. You can turn this feature off in Bluetooth settings if you prefer to pair manually on each device.

Pairing with Android phones and tablets

On Android, swipe down from the top of the screen twice to open Quick Settings, or go to Settings and select Connected Devices or Bluetooth. Turn Bluetooth on if it is not already on. The Beats Solo 3 will appear in the list of available devices. Tap the name to pair.

Android does not have the automatic cross-device pairing that iCloud provides, so you will need to pair the headphones separately on each Android device you want to use them with. The process is the same each time: enter pairing mode on the headphones, then select them from the Bluetooth menu on the device.

Pairing with a Mac or Windows computer

On a Mac, click the Apple menu, go to System Settings, select Bluetooth, and make sure Bluetooth is on. Put the Beats Solo 3 into pairing mode and they will appear in the list. Click them to connect.

On Windows 10 or 11, go to Settings, select Bluetooth & devices, and turn Bluetooth on. Put the headphones into pairing mode. Click "Add device," select Bluetooth, and wait for the Beats Solo 3 to appear in the list. Click it to pair.

Once paired to your computer, the Beats Solo 3 will show up in your audio output settings. You can set them as your default audio device so that sound automatically plays through them when they are connected, or you can switch between the headphones and your computer's built-in speakers in the volume menu.

What to do if the headphones will not pair

If the Beats Solo 3 do not appear in your device's Bluetooth list, first make sure they are actually in pairing mode — the white light on the back of the right ear cup should be flashing. If the light is not flashing, hold the power button for 10 seconds instead of 5, then release. Some users find they need the longer press to trigger pairing mode reliably.

If the light is flashing but the headphones still do not show up, try turning Bluetooth off and back on on your device, then put the headphones into pairing mode again. If that does not work, turn the headphones completely off by holding the power button for 10 seconds until the light goes out, wait 10 seconds, then turn them back on and try pairing again.

On rare occasions, the headphones may be paired to a different device that is also nearby and turned on. Bluetooth devices typically connect to the last device they were paired with, but if that device is not available, they will try the second-to-last device. If you have multiple devices in the same room, turn off Bluetooth on the others temporarily while you pair the headphones to the device you want.

Switching the Beats Solo 3 between devices

Once you have paired the headphones to multiple devices, you can switch between them by turning off Bluetooth on the current device and turning it on on the device you want to use. The headphones will automatically connect to whichever device has Bluetooth enabled and is in range.

You can also manually disconnect the headphones from one device and connect them to another without turning Bluetooth off. On your current device, go to Bluetooth settings and select "Forget" or "Unpair" next to the Beats Solo 3. Then put the headphones into pairing mode again and pair them to the new device. This is useful if you want to keep the headphones paired to one device but actively connected to another.

Battery and connection range

The Beats Solo 3 have a built-in rechargeable battery that lasts about 40 hours on a single charge. The Bluetooth connection works reliably up to about 30 feet away from your device in an open space. Walls, metal objects, and other wireless devices can reduce this range, so if you are in a crowded area with many Bluetooth devices nearby, you may experience occasional dropouts or slower reconnection.

If the headphones disconnect frequently, try moving closer to your device or away from other wireless devices like microwaves or Wi-Fi routers. You can also try forgetting the headphones from your device's Bluetooth settings and pairing them again from scratch, which sometimes resolves connection issues.

Frequently Asked Questions

Can I pair Beats Solo 3 to multiple devices at the same time?

You can pair them to as many devices as you want, but they will only actively play audio from one device at a time. When you want to switch to a different device, turn off Bluetooth on the current one or manually disconnect the headphones, then they will connect to the next device.

Why do my Beats Solo 3 keep disconnecting?

Frequent disconnections usually mean the headphones are out of range, the battery is low, or there is interference from other wireless devices. Try moving closer to your device, charging the headphones, or moving away from Wi-Fi routers and microwaves. If the problem continues, forget the headphones from your device and pair them again.

Do I need to pair Beats Solo 3 every time I use them?

No. After the first pairing, they automatically reconnect to the last device they were paired with whenever you turn them on. You only need to manually pair them again if you want to connect them to a different device or if you reset the headphones.

How do I reset Beats Solo 3 if pairing is not working?

Hold the power button for 10 seconds until the light goes out, then wait 10 seconds and turn them back on. This clears the connection and forces them into pairing mode. If that does not work, hold the power button for 15 seconds — the light will flash red and white — which performs a full factory reset and erases all paired devices.

Can I use Beats Solo 3 with two devices at once, like my phone and computer?

Not simultaneously. Bluetooth headphones can only output audio from one device at a time. However, some devices like newer iPhones and Macs can use Handoff to automatically switch the headphones between devices based on which one you are actively using, which creates the impression of seamless switching.