The basic connection process
To connect your earbuds to a Repro device, put your earbuds into pairing mode, then open Bluetooth settings on the Repro and select your earbuds from the list of available devices. The exact steps depend on which Repro model you own — the process is slightly different on Repro One versus Repro Two — but the underlying principle is the same: you're telling both devices to look for each other and exchange the information they need to communicate.
Most earbuds enter pairing mode automatically when you first turn them on, or when you hold down a button for three to five seconds. You'll usually see a light that blinks in a specific pattern — often blue or white — to signal that pairing mode is active. This is the window during which your earbuds will show up on other devices' Bluetooth lists.
The connection usually takes between five and fifteen seconds once you select the earbuds on your Repro. After that, your earbuds should stay connected to that Repro device automatically whenever both are powered on and within range — typically 30 feet or less, depending on obstacles like walls.
Key Takeaways
- Put your earbuds into pairing mode first — usually by holding a button for three to five seconds until you see a blinking light — before you try to connect them on your Repro.
- On Repro One, open Settings, select Bluetooth, then tap "Add Device" and choose your earbuds from the list.
- On Repro Two, swipe down from the top of the screen to open Quick Settings, tap Bluetooth, then select your earbuds.
- Once connected, your earbuds will reconnect automatically to that Repro whenever you turn them on, as long as they're within range.
- If your earbuds don't appear in the list, restart both devices and try pairing mode again.
Connecting on Repro One
On Repro One, start by putting your earbuds into pairing mode. Check your earbud manual or the manufacturer's website for the exact button combination — it's often a long press of the power button or a dedicated pairing button on the charging case.
Once the earbuds are in pairing mode, pick up your Repro One and tap the Settings icon (usually a gear symbol) on the home screen. Scroll down and tap Bluetooth. You should see a toggle at the top — make sure it's switched on. Below that, you'll see a button labeled "Add Device" or "Pair New Device." Tap it.
Your Repro One will now search for nearby Bluetooth devices. Within a few seconds, your earbuds should appear in the list with their model name — something like "Sony WF-1000" or "Apple AirPods Pro." Tap the name of your earbuds. The Repro will ask you to confirm the pairing; tap "Pair" or "Connect." After a few seconds, you should see "Connected" appear next to your earbuds' name.
Connecting on Repro Two
Repro Two uses a slightly faster method. First, put your earbuds into pairing mode using the same process as above — check your manual for the exact steps, since every brand is different.
On your Repro Two, swipe down from the very top of the screen with one finger. This opens the Quick Settings panel. You should see a Bluetooth icon — it looks like a stylized "B" made of dots. Tap it to open the Bluetooth menu. Make sure Bluetooth is toggled on at the top of the screen.
Below the toggle, you'll see "Available Devices" or a similar heading, followed by a list of devices your Repro Two has found. Your earbuds should appear here within a few seconds. Tap their name to connect. You may see a pairing confirmation screen; if so, tap "Pair" or "Connect." Once the connection is complete, the status next to your earbuds' name will change to "Connected."
What to do if your earbuds don't appear
If you've waited 30 seconds and your earbuds still don't show up in the list, the most common cause is that pairing mode didn't set up. Check your earbud manual again — some models require you to hold the button for a full ten seconds, or to press it twice in quick succession. Look for the blinking light pattern that signals pairing mode is active.
If you're certain pairing mode is on but the earbuds still don't appear, restart both devices. Turn off your earbuds completely, wait five seconds, then turn them back on and enter pairing mode again. On your Repro, go to Settings (or Quick Settings on Repro Two) and toggle Bluetooth off, wait five seconds, then toggle it back on. Now try searching for your earbuds again.
If your earbuds appear in the list but the connection fails when you tap them, the devices may be too far apart or there may be interference from other wireless devices. Move closer to your Repro and try again. If the problem persists, restart both devices and attempt the pairing one more time.
Reconnecting after the first time
After your earbuds are connected once, you don't need to go through pairing mode every time. straightforward turn on your earbuds and turn on Bluetooth on your Repro. Within a few seconds, they should reconnect automatically — you'll usually see a notification on your Repro confirming the connection.
Your Repro remembers your earbuds' pairing information, so it recognizes them the next time they're in range. This automatic reconnection works as long as you haven't unpaired the devices or reset your earbuds to factory settings.
If your earbuds don't reconnect automatically, open your Bluetooth settings and look for your earbuds in the list of paired devices. Tap them to connect manually. If they're no longer in the list, you'll need to go through the pairing process again from the beginning.
Connecting multiple earbuds or switching between devices
Most earbuds can only be connected to one device at a time, even though they may be paired to several devices in your Bluetooth history. If you want to use the same earbuds with a different device — say, switching from your Repro to a phone — you'll need to disconnect them from your Repro first.
To disconnect, go to your Bluetooth settings on your Repro, find your earbuds in the list of paired devices, and tap the settings icon or menu button next to them. You should see an option to "Disconnect" or "Unpair." Tap it. Your earbuds will now be available to pair with another device.
If you have multiple pairs of earbuds and want to pair them all to the same Repro, you can do that — your Repro can store pairing information for many devices. However, you can only listen through one pair at a time. To switch between them, disconnect the first pair and connect the second pair using the same Bluetooth menu.
Troubleshooting persistent connection problems
If your earbuds keep disconnecting from your Repro during use, the most likely cause is that they're moving out of Bluetooth range or there's interference from other wireless devices like microwaves, routers, or cordless phones. Try using your earbuds closer to your Repro, or move away from sources of interference.
Another common cause is low battery on your earbuds. Bluetooth connections become unstable when earbud batteries are very low. Charge your earbuds fully and try again. Similarly, if your Repro's battery is very low, Bluetooth performance can suffer — charge your Repro as well.
If disconnections continue after charging both devices and moving closer together, try unpairing and re-pairing from scratch. Go to Bluetooth settings, find your earbuds, and select "Unpair" or "Forget Device." Then put your earbuds back into pairing mode and pair them again as if it were the first time. This often clears up connection glitches that develop over time.
Frequently Asked Questions
Why do my earbuds show up in the Bluetooth list but won't connect?
This usually means your earbuds are in pairing mode but your Repro hasn't fully recognized them yet. Wait another 10 to 15 seconds and try tapping them again. If that doesn't work, restart both devices and try pairing from the beginning. Occasionally, a stalled connection attempt can be cleared only by restarting.
Can I use the same earbuds with multiple Repro devices?
Yes. Your earbuds can be paired to multiple Repro devices at once, and your Repro will remember the pairing. However, your earbuds can only actively connect to one device at a time. To switch which Repro they're connected to, disconnect them from the first Repro's Bluetooth settings, then reconnect them to the second Repro.
Do I have to put my earbuds in pairing mode every time I use them?
No. After the first pairing, your earbuds will reconnect automatically whenever you turn them on and Bluetooth is enabled on your Repro. Pairing mode is only needed the first time or if you're connecting to a different device.
What should I do if my earbuds were previously paired to another device and won't pair with my Repro?
Some earbuds stay connected to the last device they were used with and won't pair with a new device until you disconnect them from the old one. Check your earbud manual for how to unpair or reset them. You may need to hold a button for 10 to 15 seconds to clear all pairing information, then put them in pairing mode fresh for your Repro.
How far away can my earbuds be from my Repro and still stay connected?
Bluetooth typically works reliably up to about 30 feet with a clear line of sight. Walls, metal objects, and other obstacles can reduce this range. If you move beyond 30 feet or there's heavy interference, your connection may drop. Moving back into range should reconnect them automatically.