Start with the charger itself, not your phone

A charger that does not work is usually the charger's problem, not your phone's. The cable wears out faster than the device it charges — the connector bends, the wires inside fray, and the charging port on the cable itself gets loose or corroded. Before you assume your phone is broken, test whether a different charger works with your phone, or whether your charger works with a different phone. That one test tells you where the fault actually is.

If you do not have a second charger to test with, borrow one from a friend or family member for five minutes. This costs nothing and saves you from buying a replacement you do not need.

Key Takeaways

  • A charger that does not work is usually damaged cable or connector, not a broken phone — test with a different charger to know for sure.
  • Bend the cable gently near both ends while the phone is plugged in; if the phone charges only at certain angles, the cable is failing inside.
  • Lint, corrosion, or debris in the charging port on your phone can block the connection even if the charger is fine — clean it with a dry cotton swab or soft brush.
  • Fast chargers and original chargers are more reliable than cheap third-party ones, but any charger that gets hot to the touch should be thrown away when ready.
  • If your phone charges slowly or only when held at an angle, the problem is usually the cable, not the battery or the phone itself.

Check the cable for damage and wear

The cable is the weakest part of any charger. It bends, gets stepped on, wraps around things, and gets yanked out of pockets. Over time, the rubber coating cracks, the wires inside break, and the connection becomes unreliable.

Look at the cable where it meets the connector on both ends — the part that plugs into your phone and the part that plugs into the wall. If the rubber is cracked, peeling, or missing, the cable is damaged. If the connector itself is bent, loose, or corroded (looks like green or white buildup), it will not make a solid connection.

While your phone is plugged in, gently bend the cable near each end. If your phone only charges when the cable is bent a certain way, or if the charging stops and starts as you move it, the wires inside are broken. That cable needs to be replaced.

Clean the charging port on your phone

The port where your charger plugs in can collect lint, dust, and corrosion over months of use. This buildup acts like a barrier between the charger and the phone, so the connection is weak or does not work at all.

Turn off your phone. Use a dry cotton swab or a soft-bristled brush — a clean toothbrush works — and gently brush inside the charging port. Do not use water, metal objects, or anything sharp. Do not blow into the port with your mouth, because saliva can cause corrosion. If you see green or white buildup (corrosion), rub it gently with a dry cotton swab until it comes off.

After cleaning, wait a few minutes and plug in your charger. If the phone now charges normally, the port was the problem. If it still does not work, the issue is the charger or the phone's charging circuit.

Test with a different charger or cable

Borrow a charger from someone else — a friend, family member, or coworker — and try it with your phone. If your phone charges with the borrowed charger, your original charger is broken and needs to be replaced. If your phone does not charge even with a different charger, the problem is your phone's charging port or internal charging circuit, not the charger.

If you have the original charger that came with your phone, try using that instead of a third-party one. Original chargers are designed specifically for your phone and are more reliable. If the original charger works but a cheaper third-party charger does not, the third-party charger is the problem.

If you cannot borrow a charger, try plugging your charger into a different outlet. Sometimes the wall outlet is broken, not the charger. If your phone charges in a different room, the outlet was the problem.

Watch for chargers that get too hot

A charger that gets hot enough to be uncomfortable to touch is dangerous and should be thrown away when ready. Chargers that overheat can damage your phone's battery, cause the phone to overheat, or in rare cases start a fire.

It is normal for a charger to be slightly warm during use, especially if you are using your phone while it charges. But if the charger itself is too hot to hold comfortably, unplug it and do not use it again. Buy a replacement charger from the phone's manufacturer or from a brand with good reviews.

Choose a charger that will last longer

The cheapest chargers often fail within months because they use thinner cables and weaker connectors. Original chargers — the ones made by the phone manufacturer — are more expensive but last longer and are less likely to overheat.

If you buy a third-party charger, look for one with a thick, reinforced cable and a solid connector. Chargers with braided cables (woven, not smooth rubber) tend to last longer because the braid protects the wires inside. Read the reviews before you buy; if many people report that the cable fails after a few months, choose a different brand.

Keep your charger in a bag or case when you travel, and do not wrap the cable tightly around your phone or charger block. Coiling it loosely or using a cable organizer reduces the stress on the wires inside.

Know when your phone's charging port is the real problem

If your phone does not charge with multiple different chargers, and the charging port looks clean, the problem is inside your phone. The charging port itself may be damaged, or the charging circuit inside the phone may have failed.

If your phone is still under warranty, contact the manufacturer or the store where you bought it. If it is out of warranty, a phone repair shop can replace the charging port, though the cost varies widely depending on the phone model. Some phones are easier and cheaper to repair than others.

In the meantime, if your phone has wireless charging, you can charge it that way while you decide whether to repair it. Not all phones have wireless charging, but many newer models do.

Frequently Asked Questions

Can I use any charger with my phone?

Most modern phones use USB-C or Lightning connectors, and chargers with those connectors will work with any phone that has the same port. However, original chargers are designed for your specific phone and are more reliable. Avoid very cheap chargers from unknown brands, as they are more likely to fail or overheat.

Why does my phone charge slowly?

A slow charge usually means the cable is damaged or the connection is loose. Try cleaning the charging port, test with a different charger, and check the cable for cracks or bends. If the phone charges at normal speed with a different charger, your original cable is failing. If it charges slowly with every charger, the phone's charging circuit may be wearing out.

Is it safe to use a charger that gets warm?

Slight warmth is normal, especially if you use your phone while charging. But if the charger is too hot to hold comfortably, stop using it when ready. Overheating chargers can damage your battery or phone and pose a safety risk. Replace it with a new one.

What should I do if my charger sparks or smells like burning plastic?

Unplug it when ready and do not use it again. Sparking or burning smells mean the charger is failing electrically and is a fire hazard. Throw it away and buy a replacement from a reputable brand or the phone manufacturer.

Can I fix a frayed charging cable?

Wrapping a frayed cable with electrical tape is a temporary fix, but it does not repair the broken wires inside. The cable will continue to fail and may overheat. It is safer and cheaper in the long run to buy a new cable rather than risk damage to your phone or a safety hazard.