Start with the cable and power adapter

The most common reason an iPad won't charge is a problem with the cable or adapter, not the iPad itself. Check whether the cable is bent, cracked, or frayed — especially near the connector ends, where cables bend most. If you see damage, the cable needs to be replaced.

Next, try a different power adapter if you have one. Borrow one from a friend with the same iPad model, or use an Apple adapter from another device if the wattage is similar. If the iPad charges with a different adapter, your original one has failed and needs replacement. If it still won't charge, move to the next step.

Key Takeaways

  • A damaged or failing cable is the most common cause — look for visible cracks, bends, or fraying near the connectors.
  • Lint, dust, or corrosion inside the charging port blocks the connection; clean it gently with a dry cotton swab or soft brush.
  • Force restart your iPad by holding the top button and volume button together for 10 seconds, then slide to power off — this fixes software problems that block charging.
  • If your iPad is extremely hot or cold, let it reach room temperature before charging, because the battery protection circuit will refuse to charge outside safe temperature ranges.
  • If none of these steps work, the battery or charging circuit inside the iPad may have failed and will need service from Apple or an authorized repair shop.

Clean the charging port

Lint, dust, and corrosion build up inside the iPad's charging port over time and prevent the connector from making contact. Look into the port with a flashlight — if you see white, gray, or dark buildup, cleaning may restore charging.

Use a dry cotton swab or a soft-bristled toothbrush to gently brush inside the port. Do not use water, compressed air, or metal tools. Metal can scratch the connector pins and cause permanent damage. If you see green or white corrosion (oxidation), a dry cotton swab may remove light corrosion, but heavy corrosion usually means the port needs professional replacement.

Force restart your iPad

Sometimes the iPad's software stops recognizing the charger even though the hardware is fine. A force restart clears this without erasing your data. The steps depend on which iPad model you have.

For iPad Pro (all models) and iPad Air (3rd generation and later): press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button until the power-off slider appears. Slide to power off, wait 30 seconds, then press the top button again to turn it back on. For older iPad models with a home button: press and hold both the top button and the home button together for at least 10 seconds until the power-off slider appears, then slide to power off and restart.

Check the temperature

iPads have a built-in safety circuit that stops charging if the battery gets too hot or too cold. If your iPad feels hot to the touch or has been in a cold car or outside in winter, temperature is likely the problem.

Move the iPad to a room-temperature environment and wait 30 minutes before plugging it in again. Do not use a heat source to warm it up — let it reach room temperature naturally. Once it does, try charging again. If it charges normally, temperature was the issue and there is no hardware problem.

Try a different power source

The wall outlet itself might be the problem. Plug something else into the same outlet — a lamp, phone charger, or any device — to confirm the outlet works. If nothing works, try a different outlet in another room.

If you are using a USB power bank or a computer's USB port, try plugging into a wall outlet instead. Computers and power banks often deliver less power than an iPad needs to charge, so the iPad may appear to charge very slowly or not at all. Wall outlets with Apple's official USB-C or Lightning power adapters are the most reliable.

Update iPadOS if the iPad will turn on

If your iPad still has battery and will turn on, check for a pending software update. Go to Settings, then General, then Software Update. If an update is waiting, install it — sometimes charging problems are caused by bugs in the current version that Apple has already fixed.

Plug the iPad in while the update installs, even if it is not charging yet. The update process may restore the charging function. After the update finishes and the iPad restarts, try charging again with the original cable and adapter.

When to seek professional repair

If you have tried all the steps above and the iPad still will not charge, the problem is inside the device — either the battery, the charging port, or the charging circuit has failed. This is not something you can fix at home.

Contact Apple Support or visit an Apple Store to arrange repair or replacement. If your iPad is still under warranty or covered by AppleCare+, the repair may be free or low-cost. If it is out of warranty, ask for a repair estimate before authorizing work. Third-party repair shops can sometimes replace the battery or charging port for less than Apple charges, but verify they use quality parts and offer a warranty on their work.

Frequently Asked Questions

Can I charge my iPad with any USB-C cable?

Not all USB-C cables are the same. Some are designed for data only and carry less power, so the iPad charges slowly or not at all. Use the cable that came with your iPad or buy one certified by Apple. If you are unsure, test with the original cable first.

Is it bad to leave my iPad plugged in overnight?

Modern iPads have battery protection circuits that stop charging once the battery reaches 100 percent, so leaving it plugged in overnight will not damage the battery. However, keeping the battery at 100 percent for long periods does cause very slow degradation over years. If you charge overnight regularly, your battery may lose capacity slightly faster than if you unplugged at 100 percent.

Why does my iPad charge slowly with some adapters?

iPad charging speed depends on the adapter's wattage. A 5-watt phone charger will charge an iPad, but very slowly. iPad Pro models need 20 watts or higher to charge at full speed. Check the wattage printed on your adapter and compare it to Apple's recommendations for your specific iPad model.

What does it mean if the iPad gets hot while charging?

Some warmth during charging is normal, but if the iPad is too hot to hold comfortably, unplug it when ready. Excessive heat can damage the battery. Let it cool to room temperature, then try again with a different adapter or outlet. If it overheats with every charger, the battery or charging circuit may be failing.

Can water damage prevent charging even if the iPad seems to work?

Yes. Water can corrode the charging port or the internal charging circuit without affecting other functions. If your iPad has been wet, even if it powers on and runs apps, the charging port may not work. Let it dry completely in a warm room for 24 to 48 hours before trying to charge, or contact Apple for inspection.