The most common reason your iPhone won't charge is a dirty or damaged charging port
Your iPhone's charging port collects lint, dust, and debris over months of use. When enough builds up, the charging cable cannot make a solid connection to the metal contacts inside the port. This is the single most common reason an iPhone stops charging, and it is also the easiest to fix.
The second most common cause is a damaged charging cable. The rubber coating cracks, the connector bends, or the internal wires break — usually near where the cable enters the connector. A cable that worked yesterday may fail today if it was bent sharply or stepped on. Unlike the port, a damaged cable cannot be repaired; it must be replaced.
Less often, the problem is inside the phone: a failed charging circuit, a swollen battery, or a software issue that prevents charging from starting. These require different solutions than a dirty port or bad cable.
Key Takeaways
- Clean your charging port with a dry toothpick or soft brush before assuming the port is broken, since lint buildup blocks most connections.
- Test with a different charging cable and a different power adapter to isolate whether the problem is the cable, the adapter, or the phone itself.
- If your iPhone charges only when the cable is held at an angle, the port is likely damaged and will need professional repair.
- A swollen battery is a safety hazard and requires when ready service; do not continue charging a phone with a visibly bulging back.
- Restart your iPhone in recovery mode if it recognizes the charger but refuses to charge — this fixes software blocks without erasing your data.
How to clean a charging port safely
Turn off your iPhone completely before you start. Use a wooden toothpick or a soft plastic brush — not metal, which can short the contacts. Gently scrape the inside of the port in short strokes, working from the back of the port toward the opening. You are aiming to dislodge lint and dust, not to dig or explore pressure.
Shine a flashlight into the port and look for a small metal piece in the center. This is the charging pin. If you see white or gray buildup around it, that is lint. Keep scraping gently until the port looks clean and the metal contacts are visible. Do not use compressed air — the force can push debris deeper into the port or damage the internal contacts.
Once the port is clean, plug in your charging cable and wait a few minutes. If your phone was straightforward blocked by lint, it will begin charging when ready. If it still does not charge, move to the next step.
Test with a different cable and power adapter
Borrow a charging cable from someone with the same iPhone model, or buy a new one if you do not have access to another. Plug it into the same power adapter you have been using. If the phone charges with the new cable, your original cable is damaged and needs to be replaced.
If the phone still does not charge, unplug the cable and try a different power adapter — the brick that plugs into the wall. Use a 20-watt adapter or higher if you have one available. Plug in the new cable and the new adapter together. If the phone charges now, your original adapter has failed.
If the phone does not charge even with a new cable and a new adapter, the problem is inside the phone itself. This is the point to stop troubleshooting at home and seek professional service.
Recognize the signs of a damaged charging port
A port that is straightforward dirty will charge normally once it is clean. A port that is physically damaged will show specific patterns. If your iPhone charges only when you hold the cable at a particular angle or bend it in a certain way, the port is damaged. If the cable falls out easily or feels loose, the port contacts are worn or bent.
Damage usually happens from repeated bending of the cable near the connector, from dropping the phone while it is plugged in, or from liquid exposure. Once a port is damaged, it cannot be repaired at home. An Apple Store or authorized repair shop can replace the charging port, though the cost varies by iPhone model and whether your phone is under warranty.
Check for a swollen battery
A swollen battery is a safety issue and the reason some iPhones refuse to charge. Look at the back of your phone from the side. The back should be flat. If it bulges outward or feels puffy, the battery has swollen and is pushing against the internal charging circuit. This prevents the phone from accepting a charge.
A swollen battery can also cause the screen to separate from the frame or the phone to feel warm even when it is not in use. Do not continue charging a phone with a swollen battery — stop using it and take it to an Apple Store or authorized repair shop when ready. A swollen battery can fail suddenly and is a fire hazard.
Force your iPhone to restart in recovery mode
If your iPhone recognizes the charger (you see the charging symbol or a lightning bolt on the screen) but refuses to charge, a software issue may be blocking the charging process. A restart in recovery mode can fix this without erasing your data.
The steps differ by iPhone model. For iPhone X and newer: press and hold the Volume Up button, then press and hold the Volume Down button, then press and hold the Side button until the "slide to power off" screen appears. Release all buttons, then press and hold the Side button again until you see the recovery mode screen (a cable pointing to a computer icon). Plug in your charger and wait for the "Connect to Computer" message to disappear, which means the phone is charging. Then press and hold the Top button until the Apple logo appears and the phone restarts.
For iPhone 8 and earlier: press and hold the Top (or Side) button and the Volume Down button together until the recovery mode screen appears. Plug in your charger and wait for the charging symbol to appear, then restart the phone by pressing and holding the Top button.
When to seek professional repair
If you have cleaned the port, tested with a new cable and adapter, and restarted in recovery mode, and your iPhone still does not charge, the problem is a hardware failure inside the phone. This includes a failed charging circuit, a damaged battery that will not accept a charge, or internal liquid damage.
Visit an Apple Store or an authorized Apple repair shop. Bring your phone, your original charger, and the new cable you tested with — this information helps the technician diagnose the problem faster. If your phone is under warranty or covered by AppleCare+, the repair may be covered at no cost. If not, the cost depends on the model and the specific part that failed.
Frequently Asked Questions
Can I use any USB-C cable to charge my iPhone?
Not all USB-C cables are the same. Apple's official USB-C to Lightning cable (for iPhone 15 and newer) or USB-C to USB-C cable works reliably. Third-party cables vary in quality. If you buy a replacement, choose one certified by Apple or a well-reviewed brand, because cheap cables fail faster and may damage your port.
Why does my iPhone charge when plugged into a computer but not a wall outlet?
Your power adapter has likely failed. Computer USB ports deliver power more slowly than a wall adapter, so the phone may charge just enough to show the charging symbol. Try a different wall adapter with at least 20 watts of power. If the phone charges with the computer but not with any wall adapter, replace the adapter.
Is it safe to use my iPhone while it is charging?
Yes, it is safe. Using your phone while it charges slows the charging speed because the battery is powering the phone and charging at the same time. If you want faster charging, turn on Airplane Mode or let the phone sit idle while plugged in. Avoid using the phone in very hot conditions while charging, as heat can stress the battery.
What does it mean if my iPhone gets hot while charging?
Some warmth is normal, especially with fast charging. If the phone is too hot to hold comfortably, unplug it when ready. Excessive heat during charging can mean a failing battery, a damaged charging circuit, or a defective power adapter. Let the phone cool down, then try charging with a different adapter. If it still overheats, stop charging and seek professional service.
Can I charge my iPhone with a third-party wireless charger?
Yes, if your iPhone model supports wireless charging (iPhone 8 and newer). Wireless chargers are slower than wired charging and work best with a clear path between the charger and the phone's back. If your wireless charger stops working, the issue is usually the charger itself, not your phone. Test with a different wireless charger to confirm.