The most common reason your iPad won't charge is a dirty or damaged charging port
When an iPad stops charging, the problem is usually one of three things: the port itself is blocked or corroded, the cable or power adapter has failed, or the battery has degraded to the point where it no longer accepts a charge. Most of the time, you can identify which one it is in under five minutes by testing with a different cable and looking inside the port with a flashlight.
Start by looking at the Lightning port or USB-C port on the bottom of your iPad (depending on your model). Shine a flashlight into it. If you see lint, dust, or a white or green crusty buildup, that is your problem — the port is blocked or corroded and cannot make contact with the charging cable. This is the most common cause and the easiest to fix.
Key Takeaways
- A blocked or corroded charging port is the most common reason an iPad won't charge, and you can check for this yourself with a flashlight.
- If the port looks clean, try a different charging cable and power adapter — the cable fails more often than the iPad itself.
- Cleaning the port with a dry cotton swab or soft brush can restore charging, but do not use water, metal tools, or compressed air.
- If your iPad is more than four or five years old and charges very slowly even with a clean port and new cable, the battery itself may have worn out.
How to clean a blocked charging port safely
Turn off your iPad completely before you start. Do not attempt to clean the port while the device is powered on or plugged in.
Use a dry cotton swab or a soft-bristled toothbrush to gently brush inside the port. Move the swab or brush back and forth slowly — you are trying to dislodge lint and dust, not scrape the port walls. If you see white or green buildup (corrosion), a dry swab may not remove it. In that case, dampen the swab very slightly with white vinegar, squeeze out the excess so it is barely damp, and gently wipe the inside of the port. Let the iPad sit for 10 to 15 minutes with the port facing down so any moisture can evaporate.
Do not use compressed air, metal picks, or water. Compressed air can push debris deeper into the port. Metal tools can scratch the contacts inside and cause permanent damage. Water can seep into the device and damage the logic board.
After cleaning, wait at least 30 minutes before plugging in the charger. This gives any remaining moisture time to dry completely. Then plug in your iPad and watch for the charging indicator — a lightning bolt icon on the battery symbol in the top right corner of the screen.
Test with a different cable and power adapter
If the port looks clean but your iPad still will not charge, the problem is almost certainly the cable or power adapter, not the iPad itself. Charging cables fail much more often than the devices they charge.
Borrow a cable and power adapter from another iPad or from a friend with the same model. Plug it in and wait 30 seconds. If the charging icon appears, your original cable or adapter is faulty and needs to be replaced. If nothing happens, move to the next step.
If you do not have access to another cable, you can also try charging through a computer. Connect your iPad to a Mac or Windows PC using a USB cable (if your iPad has USB-C, use a USB-C cable). Your iPad may charge slowly through a computer, but if it charges at all, you know the port and battery are working — the problem is your power adapter.
When the battery itself has failed
If your iPad charges with a clean port and a different cable, but charges extremely slowly or only holds a charge for a few minutes, the battery has likely worn out. iPad batteries degrade over time, especially if the device is more than four or five years old or has been through many charge cycles.
You can check the battery health on newer iPads running iPadOS 16.1 or later by going to Settings, then Battery, then Battery Health & Charging. Look at the Maximum Capacity number — if it is below 80 percent, the battery has degraded significantly. If it is below 50 percent, the battery is near the end of its useful life.
If the battery is the problem, you have two options: replace the battery through Apple (which costs between $99 and $199 depending on the model) or replace the iPad itself. Apple's battery replacement service takes about a week and requires you to mail in your device or visit an Apple Store.
Charging problems specific to older iPad models
Older iPads with the 30-pin dock connector (iPad 2, iPad 3, and iPad 4) are especially prone to port corrosion because the connector has more exposed metal. If you have one of these models and the port is corroded, cleaning with a vinegar-dampened swab is your best option. If corrosion is severe, the port may be permanently damaged and replacement is the only fix.
iPads with Lightning connectors (iPad 5th generation and later, except iPad Pro models with USB-C) are more resistant to corrosion but still collect lint easily. The cleaning steps above work well for Lightning ports.
iPad Pro models with USB-C ports are the most durable, but USB-C ports can still become blocked with debris. The same cleaning method applies.
What to do if nothing works
If you have cleaned the port, tested with a different cable and adapter, and your iPad still will not charge, the problem is likely internal — either the charging circuit on the logic board has failed, or the battery is completely dead and cannot be revived. At this point, you need to contact Apple Support or visit an Apple Store for diagnosis.
Bring your iPad, your original charging cable, and your original power adapter. Apple can run diagnostics to determine whether the problem is the battery, the charging circuit, or something else. If the device is still under warranty or covered by AppleCare+, repair or replacement may be covered at no cost. If not, repair costs vary but typically range from $99 to $349 depending on what needs to be replaced.
How to prevent charging problems in the future
Keep your iPad in a case or bag when you are not using it. This reduces the amount of dust and lint that enters the charging port. When you are not using your iPad for extended periods, store it in a cool, dry place — heat and humidity speed up battery degradation and can cause corrosion inside the port.
Use the power adapter that came with your iPad, or buy a replacement from Apple. Third-party adapters may work, but they do not always deliver the correct voltage and can damage the battery over time. Avoid leaving your iPad plugged in overnight or for days at a time — this stresses the battery and shortens its lifespan.
Frequently Asked Questions
Can I use a different brand of charging cable?
Yes, but only if it is certified by Apple (look for the "Made for iPad" label) or if it is a high-quality third-party cable rated for your iPad's connector type. Cheap or uncertified cables can damage the port or battery. If you are unsure, use the cable that came with your iPad or buy a replacement directly from Apple.
Why does my iPad charge when it is turned off but not when it is on?
This usually means the power adapter is not strong enough to charge the battery while the iPad is also running. Try using a higher-wattage power adapter — for example, if you have been using a 10-watt adapter, try a 20-watt or 30-watt adapter. If the iPad charges with a stronger adapter, your original adapter is underpowered for your model.
Is it bad to charge my iPad overnight?
Modern iPads are designed to stop charging once the battery reaches 100 percent, so leaving it plugged in overnight will not damage the battery when ready. However, keeping the battery at 100 percent for long periods does cause gradual degradation over months and years. If you charge overnight regularly, your battery will wear out faster than if you unplug once it reaches full charge.
What does the lightning bolt symbol mean when I plug in my iPad?
The lightning bolt icon means your iPad is receiving power and the battery is charging. If you see a lightning bolt but the battery percentage is not increasing after 10 minutes, the charger may be delivering power but the battery is not accepting it — this usually means the battery has failed or the charging circuit is damaged.
Can I charge my iPad with a phone charger?
It depends on the wattage. If your phone charger is 5 watts or 10 watts and your iPad uses a Lightning connector, it will charge your iPad, but very slowly. If your iPad has USB-C, a phone charger may work, but check the wattage — iPad Pro models need at least 20 watts to charge at normal speed. Using a lower-wattage charger will not damage your iPad, but charging will take much longer.