Start with the cable and port, not the charger itself

A charger that won't charge is usually a cable problem, not a dead charger. The cable gets bent, stepped on, and yanked out of pockets thousands of times. The tiny wires inside break, the connector gets bent, or debris clogs the port on your phone. Before you buy a new charger, test whether the cable or the port is the culprit.

Unplug the cable from both the wall and your phone. Look at the connector end — the part that plugs into your phone. If it's bent, blackened, or visibly damaged, the cable is the problem. Now look at the port on your phone with a flashlight. If you see lint, dust, or corrosion inside, that's blocking the connection.

Key Takeaways

  • Most charging failures come from a bent cable or a clogged port, not a broken charger.
  • A toothpick or wooden stick can safely remove lint from your phone's charging port without damaging the pins inside.
  • If the cable is visibly bent or blackened at the connector, replace the cable first — it costs less than a new charger.
  • Wireless charging can tell you whether the problem is your cable or your phone's charging circuit.
  • If your phone charges on another cable or charger, your original cable or charger is the problem and needs replacing.

Clean the charging port safely

Lint and dust block the connection between the cable and the charging pins inside your phone. You can remove it without opening the phone or damaging anything. Use a wooden toothpick or a wooden stick — not metal, which conducts electricity and can short the pins. Gently scrape the inside of the port while looking with a flashlight. Work slowly and let gravity pull the debris out rather than pushing it deeper.

If you see corrosion — a white, green, or blue crusty buildup — your phone has been exposed to moisture. Corrosion is harder to remove with a toothpick alone. Let the phone dry completely in a warm, dry place for 24 to 48 hours before trying again. If corrosion is heavy, the port may need professional cleaning or replacement.

Test with a different cable first

Borrow a cable that matches your phone's connector type and plug it into your charger. If your phone charges with the borrowed cable, your original cable is the problem. If it still won't charge, move to the next step. This test takes two minutes and tells you exactly what to replace.

Make sure the borrowed cable is in good condition — not bent, cracked, or visibly damaged. A bad cable will give you a false result. If you don't have access to another cable, many phone stores will let you test one in the store before you buy.

Test with a different charger

If the borrowed cable didn't work, try plugging your original cable into a different charger — one from a friend, family member, or a different outlet in your home. If your phone charges with a different charger, your original charger is the problem. If it still won't charge with multiple chargers and cables, the problem is your phone's charging port or charging circuit.

When you test, use the same type of outlet. A charger designed for a wall outlet won't work in a car outlet, and vice versa. Also check that the charger is actually plugged in and the outlet has power — plug a lamp into the same outlet to confirm.

Try wireless charging to narrow it down further

If your phone supports wireless charging, place it on a wireless charger. If it charges wirelessly but won't charge with a cable, the problem is definitely your cable, port, or the charging circuit that handles wired power. If it won't charge wirelessly either, the problem is deeper — likely the battery itself or the phone's main charging circuit.

Wireless charging is slower than wired charging, so don't expect the same speed. A full charge on wireless can take two to three times longer. If the phone charges wirelessly but very slowly, that's normal and not a sign of a problem.

Replace the cable or charger based on what you found

If testing showed the cable is the problem, buy a replacement cable that matches your phone's connector type. Check your phone's manual or the manufacturer's website to confirm whether you need USB-C, Lightning, or Micro-USB. Third-party cables work fine as long as they're from a reputable brand — look for ones with good reviews and a warranty.

If the charger is the problem, buy a replacement charger with the same wattage as the original. The wattage is printed on the charger itself or in your phone's manual. Using a charger with lower wattage will charge your phone more slowly but won't damage it. Using one with much higher wattage can damage the battery over time, so match the wattage when you can.

When the problem is your phone's port or charging circuit

If you've tested multiple cables and chargers and none of them work, and wireless charging doesn't work either, the problem is inside your phone. The charging port may be damaged, or the charging circuit that manages power may have failed. This is not something you can fix at home.

Contact the phone manufacturer's support line or visit an authorized repair center. Bring your phone and explain what you've already tested — that you've tried multiple cables and chargers, and that wireless charging doesn't work. This information helps the technician diagnose the problem faster. Repair costs vary by phone model and whether you have a warranty or insurance plan.

Frequently Asked Questions

Can I use any USB charger with my phone?

Most phones will charge with any charger that has the right connector type, but charging speed varies. A charger with lower wattage will work but charge slowly. Check your phone's manual for the recommended wattage to avoid damaging the battery with a charger that's too powerful.

Is it safe to use a charger with a bent connector?

No. A bent connector can damage the port inside your phone or cause arcing, which creates heat and fire risk. Replace the cable when ready. Do not try to straighten it — the internal wires are likely already broken.

Why does my phone charge on one cable but not another?

The cable you're using probably has a broken wire inside or a loose connector. The other cable makes better contact. Replace the cable that doesn't work. If one cable works and another doesn't, the problem is the cable, not your phone.

Should I use the original charger that came with my phone?

The original charger is designed for your phone's battery and charging circuit, so it's the safest choice. Third-party chargers work fine if they match the wattage and connector type, but the original is always the best option if you still have it.

What does it mean if my phone gets hot while charging?

Some heat is normal, but if the phone is too hot to touch, unplug it when ready. Heat during charging usually means the charger is delivering too much power, the cable is damaged, or the battery is failing. Stop using that charger and test with a different one.