Open the AirTag and remove the old battery

The battery in an AirTag is a standard CR2032 coin cell, the same type used in watches and calculators. To replace it, hold the AirTag with the metal side facing you. Press down on the stainless steel back cover and twist it counterclockwise about a quarter turn until it stops. The cover will pop off.

Once the cover is off, you will see the battery sitting in a small circular slot. Lift it out with your fingernail or a plastic tool — a plastic spoon edge or old credit card works well. Do not use a metal tool, as it can scratch the inside of the AirTag or cause a short circuit. The battery may stick slightly, so be patient and gentle.

Key Takeaways

  • AirTags use CR2032 coin cell batteries, which you can buy at any drugstore, supermarket, or hardware store for two to five dollars.
  • The metal back cover twists off counterclockwise — press down while turning, and it will pop free after a quarter turn.
  • Insert the new battery with the positive side facing up (the side with the plus sign), and the AirTag will recognize it when ready.
  • Your iPhone will show a notification when the battery is low, usually giving you several weeks of warning before the AirTag stops working.

Insert the new battery correctly

Before you install the new battery, check which side faces up. CR2032 batteries have a plus sign stamped on one side (the positive terminal) and are blank on the other side (the negative terminal). The positive side must face up when you place it in the AirTag.

Drop the new battery into the slot with the plus sign facing toward you. It will sit flat in the circular holder. You do not need to press hard — it should rest in place on its own. If the battery feels loose or tilted, remove it and try again, making sure the edges are aligned with the slot.

Close the AirTag and test the connection

Once the battery is seated, replace the metal back cover by aligning it with the slot on the AirTag body and twisting it clockwise until you hear or feel a click. It should be snug but not so tight that you strain to turn it. The cover will stop turning when it is fully seated.

Your iPhone will send you a notification within a few seconds confirming that the AirTag battery is good. If you do not see a notification, open the Find My app, tap the Items tab, and select the AirTag. The battery status will show there. If it still shows low or no battery, remove the cover again and check that the battery is sitting flat with the positive side up.

Where to buy CR2032 batteries

CR2032 batteries are sold almost everywhere. Check the pharmacy or health and beauty section of any supermarket, drugstore, or big-box retailer. You will also find them at hardware stores, electronics retailers, and online. A single battery usually costs between two and five dollars, though buying a pack of four or eight is often cheaper per battery.

Any brand of CR2032 will work in an AirTag — you do not need Apple-branded batteries. Duracell, Energizer, Panasonic, and store brands all function the same way. If you buy batteries in bulk, store them in a cool, dry place. Batteries last longer when kept away from heat and moisture.

How to know when the battery is running low

Your iPhone sends a notification to the device that owns the AirTag when the battery drops to about 10 percent. This usually gives you two to three weeks of warning before the AirTag stops working entirely. The notification will say something like "AirTag battery is low" and will appear in the Find My app.

You can also check the battery status manually at any time. Open Find My, tap Items, select the AirTag, and look at the battery percentage shown on the details screen. This is the best way to check if you are not sure whether you saw a notification.

What to do with the old battery

CR2032 batteries contain lithium and should not go in the regular trash. Most communities have a battery recycling program. Check your city or county website for a drop-off location, or ask at your local hardware store or supermarket — many have battery collection bins near the customer service desk.

If you cannot find a local program, some retailers like Best Buy accept batteries for recycling. You can also mail batteries to a recycling service, though this is usually only worth doing if you have many batteries to send at once.

Frequently Asked Questions

Can I use a different type of battery in my AirTag?

No. AirTags are designed for CR2032 batteries only. Other coin cell batteries like CR2025 or CR2016 are physically similar but will not fit properly or may damage the AirTag. Always use CR2032.

How long does a CR2032 battery last in an AirTag?

A new CR2032 battery typically lasts about one year in an AirTag under normal use. The exact time depends on how often the AirTag is tracked and how far away it is from your iPhone. AirTags that are tracked frequently or are far from your phone may drain the battery faster.

What if my AirTag does not recognize the new battery?

Remove the cover and check that the battery is sitting flat in the slot with the positive side facing up. Make sure the battery edges are aligned with the circular holder and not tilted. Replace the cover and wait a few seconds. If the AirTag still does not respond, try a different new battery — the first one may be defective.

Is it safe to replace the battery myself?

Yes. Replacing the battery in an AirTag is safe and takes less than a minute. There are no tools required, no risk of electric shock, and no parts that can break easily. Apple designs AirTags to be opened and closed by users.

Can I buy rechargeable CR2032 batteries for my AirTag?

Rechargeable CR2032 batteries exist, but they are not recommended for AirTags. Rechargeable versions have a lower voltage than standard batteries and may not power the AirTag reliably. Stick with standard single-use CR2032 batteries.