Where to find your AirPods battery percentage
Your iPhone, iPad, or Mac shows your AirPods battery in the same place you check your device's own battery — the status screen that appears when you open the charging case near your unlocked phone. On iPhone and iPad, swipe down from the top right corner to open Control Center, and you'll see a battery card showing your AirPods, case, and device percentages. On Mac, click the battery icon in the top right corner of the menu bar.
The battery card displays three separate readings: the left earbud, the right earbud, and the charging case itself. Each shows a percentage from 0 to 100. If one earbud is missing or disconnected, that percentage won't appear. The case percentage tells you how many times you can fully recharge your earbuds before the case itself needs power.
This is the fastest way to check, and it works whether your AirPods are in your ears, in the case, or sitting nearby. You don't need to open any app or dig through settings.
Key Takeaways
- Open Control Center on iPhone or iPad (swipe down from top right) to see all three battery percentages in one card.
- On Mac, click the battery icon in the menu bar to view AirPods and case battery levels.
- The case battery percentage shows how many full charges remain before you need to plug in the case itself.
- If one earbud shows low battery while the other is full, the low one will disconnect first during use.
- Siri can read your AirPods battery aloud if you ask "What's the battery on my AirPods," though the Control Center method is faster.
Using Siri to hear your battery level spoken aloud
If you prefer not to look at the screen, you can ask Siri to read your AirPods battery percentage. Say "Hey Siri, what's the battery on my AirPods" and Siri will speak the percentages for both earbuds and the case. This works on any device where your AirPods are connected — iPhone, iPad, Mac, or Apple Watch.
Siri reads the information in the order: left earbud, right earbud, case. The response takes about three seconds. This method is useful if you're driving, cooking, or your hands are full, but it requires Siri to be enabled on your device.
What the battery percentages actually mean during use
When both earbuds show the same battery level, they drain at roughly the same rate. If one earbud shows 30 percent and the other shows 60 percent, the lower one will stop working first — usually without warning. You'll hear audio only in one ear until you put both earbuds back in the case to rebalance them.
The case battery percentage is separate from the earbud percentages. A case at 20 percent can still fully charge your earbuds once, but after that charge cycle, the case will be empty. Once the case reaches 0 percent, you cannot charge your earbuds at all until you plug the case into power.
AirPods typically play for about five to six hours on a full charge, depending on volume and whether noise cancellation is on. The case holds enough power for roughly 24 additional hours of listening across multiple charges.
Checking battery on older AirPods models
The Control Center method works for all AirPods models: AirPods Pro (both generations), AirPods Max, AirPods (2nd and 3rd generation), and AirPods Pro Max. The battery card layout is identical across all models.
If you have the original AirPods (1st generation), the battery display in Control Center shows only the case percentage, not individual earbud levels. You can still use Siri to ask about battery, and Siri will report the case level. For these older models, the case battery is the only number available.
Why one earbud drains faster than the other
If you notice one earbud consistently shows lower battery than the other, the issue is usually uneven usage. If you primarily listen with one earbud in and leave the other in the case, that earbud will drain while the unused one stays charged. Over time, this creates a gap between the two.
Occasionally, one earbud may have a hardware issue that causes faster drain — a faulty battery or a problem with the charging contacts. If one earbud consistently drops 10 to 15 percent faster than the other even when both are in use, contact Apple Support or visit an Apple Store to have the earbud tested.
To keep both earbuds balanced, use both equally and return them to the case together when you're done. This ensures they charge and drain at similar rates.
What to do when battery is low
When either earbud drops below 10 percent, your iPhone will send a notification. At 5 percent, you'll hear a low-battery tone in your ears. At 0 percent, that earbud will disconnect and stop working. You can continue using the other earbud, but you'll lose stereo sound.
Put both earbuds in the case when ready when you see a low-battery warning. They'll begin charging as soon as the case closes, and you'll have a usable charge within 15 minutes. A full charge from empty takes about 45 minutes in the case.
If the case is also low on battery, plug it into power using the Lightning cable (or USB-C on newer models) while your earbuds charge inside. The case will charge your earbuds even while the case itself is charging, though the process is slower.
Checking battery on your Apple Watch
If your AirPods are connected to an Apple Watch instead of an iPhone, you can still check the battery. Open Control Center on the watch by swiping up from the bottom of the screen. The battery card shows your AirPods and case percentages the same way it does on iPhone.
You can also ask Siri on the watch to read your battery level. The process is identical to iPhone — the watch will speak the percentages aloud.
Frequently Asked Questions
Why does Control Center show 0 percent for one earbud?
A 0 percent reading usually means that earbud has disconnected or is no longer paired. Put it back in the case for 30 seconds, then remove it. If it still shows 0 percent, the earbud may have a hardware issue and should be tested by Apple Support.
Can I check my AirPods battery on Android?
No. AirPods only show battery percentages on Apple devices — iPhone, iPad, Mac, and Apple Watch. If you use AirPods with Android, you won't see the battery percentage anywhere. You'll only know the battery is low when you hear the low-battery tone.
Does the battery percentage update in real time?
The battery percentage updates every few seconds when you have Control Center open. If you close Control Center and reopen it a minute later, the percentage will have changed slightly. The updates are not live — they reflect the battery level from the last time your device checked.
What if my AirPods won't show battery in Control Center?
Make sure your AirPods are connected to your device. Open Settings, go to Bluetooth, and confirm your AirPods appear in the "My Devices" list. If they're not listed, tap them to reconnect. Once connected, the battery card will appear in Control Center within a few seconds.
How often should I check my AirPods battery?
Check your battery when you first put your AirPods in if you plan to use them for more than a few hours, or whenever you hear the low-battery tone. Daily checking isn't necessary — the notifications will alert you when battery is running low.