Check battery on your iPhone, iPad, or Mac
The fastest way to see your AirPods battery is to open the case near your iPhone, iPad, or Mac. Your device will show a popup window with the battery level of each earbud and the case itself. This popup appears automatically when your device detects the open case — you do not need to open any app or settings.
If the popup does not appear, make sure Bluetooth is turned on. On iPhone or iPad, swipe down from the top right corner to open Control Center and check that the Bluetooth icon is lit. On Mac, click the Bluetooth icon in the menu bar at the top of the screen.
The popup shows three separate battery percentages: left earbud, right earbud, and charging case. If one earbud is much lower than the other, that earbud may have a hardware problem — contact Apple Support if the gap stays large over time.
Check battery in the Settings app
You can also find battery information by opening Settings on your iPhone or iPad. Go to Settings, then tap Bluetooth, then find your AirPods in the list and tap the information icon (the small circle with an "i" inside). The battery percentage for each earbud and the case will appear on that screen.
This method is slower than the popup, but it is useful if you want to check battery without opening the case. The numbers update when your device last connected to your AirPods, so if you have not used them in a while, the percentages may be a few minutes old.
On Mac, click the Bluetooth icon in the menu bar, find your AirPods in the list, and hover your mouse over them. The battery levels will show in a tooltip.
Key Takeaways
- Open your AirPods case near your iPhone, iPad, or Mac to see a battery popup showing the charge level of each earbud and the case.
- If the popup does not appear, turn on Bluetooth in Control Center (iPhone or iPad) or the menu bar (Mac).
- You can also check battery by going to Settings > Bluetooth on iPhone or iPad and tapping the information icon next to your AirPods.
- Battery percentages update when your device connects to your AirPods, so numbers may be a few minutes old if you have not used them recently.
What the battery percentages mean
Each earbud shows its own battery level separately. If one earbud is at 50% and the other is at 10%, you can use both until the lower one dies, then swap it out for the case to charge while you keep using the higher one. The case itself also has its own battery, which powers the charging process.
When your AirPods are in the case, they charge automatically. A full charge on the case can refill your earbuds multiple times — the exact number depends on your AirPods model, but most cases provide three to five full charges. Once the case battery is empty, you need to plug the case into power to charge anything.
Troubleshooting when battery does not show
If you open the case and no popup appears, first check that Bluetooth is on. Then try closing the case and opening it again. If the popup still does not show, restart your device by turning it off and back on, then try again.
If your AirPods are not showing up in Bluetooth settings at all, they may not be paired to your device. Hold the setup button on the back of the case for about 15 seconds until the light flashes white, then hold your device near the case and follow the pairing steps that appear on screen.
For AirPods Pro or AirPods Max, you can also check battery in the Control Center on iPhone or iPad. Swipe down from the top right corner and look for the battery widget, which shows the charge level without opening the case.
Why one earbud drains faster than the other
It is normal for one earbud to lose charge slightly faster than the other over time. This happens because each earbud has its own battery and they do not drain at exactly the same rate. Small differences in how you use them — like holding one to your ear longer or using it for more calls — can add up over months.
If one earbud consistently dies much faster than the other (like 30% or more difference), the battery in that earbud may be wearing out. AirPods batteries degrade over time and eventually hold less charge. If this is happening, you can contact Apple Support to discuss repair or replacement options.
Battery drain and what uses the most power
Active Noise Cancellation (on AirPods Pro and Max) uses more battery than Transparency mode or no noise control. If you want your AirPods to last longer on a single charge, switch to Transparency mode or turn off noise control entirely. You can change this setting in Control Center on your device.
Bluetooth connection itself also drains battery, so if you are not using your AirPods, put them in the case to stop the Bluetooth radio from running. Leaving them out of the case with Bluetooth on will drain the battery even if you are not listening to anything.
Frequently Asked Questions
Why does the battery percentage jump around?
Battery percentages are estimates, not exact measurements. Your device updates them when it connects to your AirPods, and the numbers can shift by a few percent depending on how much power is being used at that moment. This is normal and does not mean your AirPods are broken.
Can I see battery on my Apple Watch?
Yes. On your Apple Watch, open Control Center by swiping up from the bottom of the screen, then look for the battery widget. It will show your AirPods battery if they are connected to your watch. You can also check in the Watch app on your iPhone under Bluetooth.
What should I do if one earbud shows 0% but still works?
Put both earbuds in the case to charge them. The battery percentage may not update when ready — it can take a few seconds after you close the case. If one earbud still shows 0% after charging for 15 minutes, try restarting your device and checking again.
Does checking the battery drain my AirPods?
No. Opening the case or checking Settings uses almost no power. The battery drain from checking is so small you will not notice it. The main drain comes from Bluetooth connection and audio playback, not from looking at the battery level.