The two ways to charge Switch controllers

Nintendo Switch controllers charge in two ways: through the console itself, or with a separate USB cable. The Joy-Con controllers (the small side controllers) charge only when attached to the console or placed in the charging grip. The Pro Controller (the full-sized controller) charges via a USB-C cable, the same port used on many phones and tablets.

Which method you use depends on what hardware you own and whether you want to charge while playing. If you have Joy-Cons, you cannot charge them while using them separately — they must be docked to the console or placed in a charging grip. The Pro Controller can charge while connected to a power source, but you cannot use it during charging unless you have a very long cable.

Key Takeaways

  • Joy-Con controllers charge only when attached to the Switch console or placed in an official Nintendo charging grip.
  • The Pro Controller charges via USB-C cable and takes roughly three to six hours for a full charge from empty.
  • Joy-Cons attached to the console charge while the console itself is powered on or in sleep mode, but charge faster when the console is docked.
  • A third-party charging grip for Joy-Cons costs less than an official one but may charge more slowly or less reliably.
  • Overcharging is not a risk with modern Nintendo controllers — they stop charging once the battery reaches full capacity.

Charging Joy-Con controllers attached to the console

When you slide the Joy-Cons onto the sides of the Switch console, they begin charging when ready if the console is powered on, in sleep mode, or plugged into power. The charge speed depends on the console's state: Joy-Cons charge fastest when the console is docked and plugged in, more slowly when the console is in handheld mode and plugged in, and slowest when the console is in sleep mode.

A full charge from empty takes roughly three to six hours when the console is docked. If you leave the Joy-Cons attached overnight while the console is docked, they will reach full charge and stay there — the console stops sending power once the battery is full, so leaving them connected longer does no harm.

You can check the battery level of attached Joy-Cons by looking at the battery icon in the top-right corner of the home screen. Each controller shows its own percentage.

Charging Joy-Con controllers with a charging grip

A charging grip is a case that holds two Joy-Cons and charges them via USB-C cable. Nintendo sells an official charging grip; third-party versions are also available from manufacturers like PowerA and Nyxi, usually at a lower price.

To use a charging grip, insert both Joy-Cons into the grip with the buttons facing outward, then plug the USB-C cable into the grip and into a power source. The grip itself does not need to be connected to the console. A full charge takes roughly three to six hours, the same as charging attached to the console.

Third-party grips vary in quality. Some charge at the same speed as Nintendo's official version; others charge more slowly or may not charge reliably if the Joy-Con contacts are dirty. If a third-party grip is not charging, try cleaning the metal contacts on both the Joy-Cons and the inside of the grip with a dry cloth.

Charging the Pro Controller

The Pro Controller charges via a USB-C cable — the same type of cable used to charge many Android phones, tablets, and laptops. Nintendo includes a USB-C cable with the Pro Controller, but you can use any standard USB-C cable if you lose it.

Plug the cable into the USB-C port on the bottom of the Pro Controller and into a USB power source: a wall outlet adapter, a computer, a portable battery pack, or the Switch console itself. A full charge from empty takes roughly three to six hours. You cannot use the Pro Controller while it is charging unless the cable is long enough to reach from your power source to your hands, which is impractical.

Like the Joy-Cons, the Pro Controller stops charging once the battery is full and will not overcharge if left plugged in longer.

Charging from the Switch console's USB ports

The Switch console has a USB-C port on the bottom (for docking and power) and, on the Switch OLED model only, a USB-A port on the back. You can charge a Pro Controller by plugging its USB-C cable into the console's USB-C port, but this only works if the console itself is plugged into power — the console's battery will not drain to charge the controller.

The USB-A port on the OLED model is designed for external storage, not for charging controllers. Do not attempt to charge a controller through this port.

How long controllers hold a charge

A fully charged Joy-Con lasts roughly four to six hours of active play, depending on the game and brightness settings. A fully charged Pro Controller lasts roughly six to twelve hours. These times are shorter if you use rumble features, play demanding games, or keep the screen at high brightness.

Over time, all rechargeable batteries lose capacity. After two to three years of regular use, you may notice that a fully charged controller does not last as long as it did when new. This is normal wear. When a controller's battery no longer holds enough charge for your needs, Nintendo sells replacement Joy-Cons and Pro Controllers, or you can send controllers to Nintendo for battery replacement.

Troubleshooting a controller that will not charge

If a Joy-Con or Pro Controller will not charge, try these steps in order. First, clean the metal charging contacts on the controller with a dry, lint-free cloth — dirt or corrosion on the contacts is the most common cause of charging failure. Wipe the contacts on the charging grip or console as well.

Second, try a different USB-C cable if you are charging a Pro Controller. The cable itself may be damaged even if it works with other devices. Third, try charging the controller in a different location — a different wall outlet, a different computer, or a different charging grip. If the controller charges in one location but not another, the problem is the power source or cable, not the controller.

If the controller still will not charge after cleaning the contacts and trying a different cable and power source, the battery itself may be damaged. Contact Nintendo Support or visit a repair shop that handles game controllers.

Frequently Asked Questions

Can I charge Joy-Cons while I am using them?

No. Joy-Cons charge only when attached to the console or placed in a charging grip, neither of which allows you to use them at the same time. If you need to play while one pair charges, you need a second pair of Joy-Cons or a Pro Controller.

Is it bad to leave controllers plugged in overnight?

No. Modern Nintendo controllers stop charging once the battery reaches full capacity and do not overcharge. Leaving them plugged in overnight will not damage the battery or shorten its lifespan.

Why is my Pro Controller charging slowly?

The cable or power source may be faulty. Try a different USB-C cable and a different power outlet. Some older or low-power USB adapters charge more slowly than others. A standard phone charger or computer USB port usually works fine.

Do I need an official Nintendo charging grip, or can I use a third-party one?

Third-party charging grips work, but quality varies. Nintendo's official grip is reliable and charges at the same speed as attaching Joy-Cons to the console. Third-party grips are cheaper but may charge more slowly or less reliably. Read reviews before buying a third-party version.

What should I do if a controller gets wet?

Do not charge it when ready. Let it dry completely for at least 24 hours in a warm, dry place. Once dry, try charging it normally. If it still will not charge or behaves strangely, the internal circuitry may be damaged and the controller may need professional repair.