Plug in your Ring doorbell using the included power adapter or a USB cable

Ring doorbells charge through a USB port on the bottom or side of the device. The exact location depends on which Ring model you own — Ring Video Doorbell (2nd Gen and newer), Ring Video Doorbell Pro, or Ring Video Doorbell Elite all have the port in slightly different spots, but the charging method is the same for all of them.

Use the USB-C or micro-USB cable that came in the box with your doorbell. If you no longer have the original cable, any standard USB cable of the same type will work. Plug one end into the doorbell and the other end into a power adapter (the kind you use for a phone charger works fine) or directly into a USB port on a computer or powered hub.

The doorbell will show a white LED light while charging. This light turns off once the battery reaches full capacity, which typically takes three to four hours depending on how depleted the battery was. You do not need to remove the doorbell from your wall or door frame to charge it — you can charge it in place if the USB port is accessible.

Key Takeaways

  • Ring doorbells charge through a USB port using the cable included in the box, and you can charge the device while it remains mounted on your door or wall.
  • A white LED light indicates the doorbell is charging, and the light turns off when the battery is full, usually after three to four hours.
  • If your Ring doorbell is hardwired to your home's electrical system, it charges automatically and you do not need to manually plug it in.
  • The battery drains faster in cold weather and when the doorbell records frequently, so check the battery level monthly through the Ring app.
  • If the doorbell will not hold a charge, the battery may need replacement, which Ring can arrange through their support team.

Hardwired Ring doorbells charge automatically without a USB cable

Some Ring doorbell models can be connected directly to your home's existing doorbell wiring. If your doorbell is hardwired, it draws power continuously from your electrical system and does not have a removable battery that needs charging. The battery in a hardwired model acts as a backup in case of a power outage, and it charges automatically whenever power flows through the wires.

You can tell if your doorbell is hardwired by checking the Ring app. Open the app, go to your device settings, and look for "Power Source." If it says "Wired" or shows a plug icon, your doorbell is hardwired. If it says "Battery," you have a battery-powered model that needs manual charging.

Hardwired doorbells are the easiest to maintain because you never need to remember to charge them. However, if you want to charge the battery manually to may support it is fully backed up, you can still plug in a USB cable even on a hardwired model — the doorbell will accept the charge without any issues.

Check your battery level through the Ring app before it runs out

The Ring app shows your doorbell's current battery percentage. Open the app, select your doorbell from the device list, and tap "Device Health." The battery level appears as a percentage at the top of the screen. Most Ring doorbells send a notification when the battery drops below 20 percent, giving you time to charge before it dies completely.

Battery drain varies depending on how often your doorbell records. A doorbell in a busy area with frequent motion detection or video recording will drain faster than one in a quiet location. Cold weather also drains batteries more quickly — if you live somewhere with winter temperatures below 40 degrees Fahrenheit, expect to charge more often during those months.

Check the battery level at least once a month, especially if you notice the doorbell is not recording as often as usual or if notifications are delayed. A doorbell with very low battery may still function but will miss some motion events or take longer to send alerts to your phone.

Charge your Ring doorbell before the battery completely dies

A completely dead battery can take longer to charge and may cause the doorbell to lose its connection to your Wi-Fi network. If your doorbell stops responding in the Ring app or stops sending notifications, the battery may be fully depleted. Plug it in and wait at least 30 minutes before checking the app again — the doorbell needs enough charge to power on and reconnect to your network.

If the doorbell still does not respond after charging for an hour, try unplugging it for 10 seconds and plugging it back in. This forces a restart and often restores the connection. If the doorbell still will not turn on, the battery may be damaged and need replacement.

Replace the battery if it no longer holds a charge

Ring doorbell batteries typically last two to three years before they stop holding a charge effectively. If you charge your doorbell fully but it drains to zero within a few days even with normal use, the battery has likely reached the end of its lifespan.

You can order a replacement battery directly from Ring's website or through Amazon. The battery costs between $20 and $40 depending on your doorbell model. Replacement is straightforward — you remove the doorbell from its mount, open the battery compartment (usually held by a single screw), slide out the old battery, and slide in the new one. Ring's support team can walk you through the process if you are unsure, or you can watch a video tutorial specific to your doorbell model on Ring's help center.

If you are uncomfortable replacing the battery yourself, a local electronics repair shop or handyman can do it for you, though this will cost more than the battery itself.

Troubleshoot charging problems if your doorbell will not charge

If you plug in your doorbell and the white LED light does not appear, first check that the USB cable is fully inserted into both the doorbell and the power adapter. The connection needs to be snug — a loose cable will not charge the device. Try a different USB cable if you have one available, because the original cable may be damaged even if it looks fine.

Next, check the USB port itself for debris. Use a flashlight to look inside the port and see if lint, dust, or corrosion is blocking the connection. If you see debris, use a dry cotton swab or a small brush to gently clean the port. Do not use water or liquid cleaners, as moisture can damage the internal electronics.

If the cable is find and the port is clean but the doorbell still will not charge, try plugging it into a different power adapter. Some adapters do not deliver enough power for the doorbell to charge, even though they work fine for phones. A standard phone charger rated for at least 1 amp should work. If none of these steps work, contact Ring support — the battery or charging circuit may be faulty and the doorbell may need replacement.

Frequently Asked Questions

Can I charge my Ring doorbell with any USB cable?

Yes, as long as it is the correct type for your model. Most newer Ring doorbells use USB-C, while older models use micro-USB. Check your doorbell's port before buying a replacement cable. Any standard cable of the correct type will work — you do not need an official Ring cable.

How long does a Ring doorbell battery last on a full charge?

Battery life depends on how often the doorbell records. In a quiet area with minimal motion detection, a full charge may last several weeks. In a busy area with frequent recording, it may last only a few days. Cold weather significantly reduces battery life.

Will my Ring doorbell work while it is charging?

Yes, your doorbell continues to record and send notifications while plugged in. You do not need to disconnect it to use it — charging and operation happen at the same time.

What should I do if my doorbell loses Wi-Fi connection after charging?

Unplug the doorbell for 10 seconds and plug it back in to restart it. Wait two minutes for it to reconnect to your network. If it still does not connect, check that your Wi-Fi password has not changed and that the doorbell is within range of your router.

Is it safe to leave my Ring doorbell plugged in all the time?

Yes, it is completely safe. Ring doorbells have built-in protection that stops charging once the battery is full, so leaving it plugged in will not overcharge or damage the battery. Many people leave their doorbells plugged in permanently to may support the battery never runs low.