Ring cameras charge through a USB cable connected to a power outlet or a powered USB port

Most Ring cameras use a rechargeable lithium battery that you remove from the device, connect to a USB cable, and plug into a wall outlet or computer. The battery itself is what charges — not the camera mounted on your wall or doorbell. Ring sells a dedicated charging dock for some models, but a standard USB power adapter works just as well.

The exact charging method depends on which Ring camera you own. Wired models like the Ring Video Doorbell (2nd Gen) and Ring Spotlight Cam Wired draw power directly from your home's electrical system and do not have removable batteries. Battery-powered models like the Ring Stick Up Cam and Ring Spotlight Cam Battery have removable batteries that you charge separately.

Key Takeaways

  • Remove the battery from your Ring camera by pressing the release button or sliding the battery out, depending on your model.
  • Connect the battery to a USB-C or micro-USB cable (whichever your model uses) and plug it into any standard power adapter or USB port.
  • A full charge typically takes four to ten hours, depending on battery size and the power adapter you use.
  • You can keep your camera running by swapping in a second fully charged battery while the first one charges.
  • Ring batteries last two to three years before they hold less charge, and Ring sells replacement batteries for around $30 to $60.

How to remove and charge your Ring battery

Start by locating the battery release mechanism on your camera. On most Ring Stick Up Cam models, you press a small button on the back of the camera body and the battery slides out. On Ring Spotlight Cam Battery models, the battery usually slides out from the bottom or side of the camera. Check your specific model's manual if you are unsure — Ring publishes these on their support website.

Once the battery is out, look at the charging port on the battery itself. Most newer Ring batteries use USB-C; older models use micro-USB. Plug the appropriate cable into the battery and connect the other end to a power adapter. A standard 5-volt USB power adapter (the kind that comes with most phones) works fine. Plug the adapter into a wall outlet or use a powered USB hub on your computer.

The battery will show a light indicator while charging — usually red or orange while charging and green or white when fully charged. Charging time ranges from four to ten hours depending on the battery capacity and the power adapter's output. A higher-wattage adapter (like a 2-amp adapter instead of 1-amp) will charge faster, but any standard USB power adapter is safe to use.

What to do while your battery charges

If you have a second battery, swap it into your camera while the first one charges. This keeps your camera recording without interruption. Ring sells extra batteries separately, and they cost between $30 and $60 depending on the model. Having a spare battery is practical if you rely on your camera for security and cannot afford downtime.

If you only have one battery, your camera will be offline while it charges. You can still view recorded footage from before the battery was removed, but live view and motion alerts will not work. Plan charging for times when you are home or when you do not need active monitoring.

Understanding battery life and when to recharge

Ring battery life depends on how often your camera detects motion, records video, and streams live view. A camera in a low-traffic area might run for three to six months on a single charge. A camera in a high-traffic area or one that records frequently might need charging every two to four weeks. Ring's app shows your battery percentage in the device settings, so you can monitor it without guessing.

Recharge your battery when it drops below 20 percent. Letting a lithium battery drain completely can shorten its lifespan. If you notice your battery drains faster than it used to, that is normal — lithium batteries gradually lose capacity over time. Most Ring batteries last two to three years before they hold noticeably less charge.

Charging with Ring's official dock versus a standard USB adapter

Ring sells a charging dock designed specifically for their batteries. The dock holds the battery upright and connects to a USB power source, making it easier to charge without handling the cable. The dock costs around $20 to $30 and is optional — it is a convenience item, not a requirement.

A standard USB power adapter works just as well as the official dock. The only advantage of the dock is that it keeps the battery in one place and makes it harder to lose or misplace. If you already have USB power adapters around your home, you do not need to buy the dock.

Troubleshooting slow or failed charging

If your battery is charging very slowly, check the power adapter's output. Look for a label on the adapter showing the amperage — usually 1A, 2A, or higher. A 1-amp adapter will charge slower than a 2-amp adapter. Switching to a higher-wattage adapter will speed up charging, but any standard USB adapter is safe.

If your battery will not charge at all, try a different USB cable first. Cables wear out and can stop working even if they look fine. If a different cable does not help, try a different power outlet to rule out a faulty outlet. If the battery still will not charge after trying multiple cables and outlets, the battery itself may be damaged and will need to be replaced.

Make sure the charging port on the battery is clean and free of dust or debris. Wipe it gently with a dry cloth if it looks dirty. Dirt in the port can prevent a good connection between the cable and the battery.

Wired Ring cameras and power requirements

If you have a wired Ring doorbell or camera, you do not charge a battery — the device draws power directly from your home's electrical wiring. Wired models connect to your existing doorbell transformer (usually located in your attic, basement, or garage) or to a dedicated power supply. These models never run out of battery because they are always plugged in.

Wired models are more reliable for continuous recording and do not require you to remember to charge anything. The trade-off is that installation is more involved and may require an electrician if you do not have existing doorbell wiring.

Frequently Asked Questions

Can I use any USB power adapter to charge my Ring battery?

Yes. Any standard USB power adapter rated for 5 volts will safely charge your Ring battery. Higher-wattage adapters (2-amp or higher) charge faster than lower-wattage ones (1-amp), but all are safe. Avoid using adapters rated for higher voltages, as those can damage the battery.

How long does a Ring battery take to fully charge?

Most Ring batteries take four to ten hours to fully charge, depending on the battery size and the power adapter's wattage. A 2-amp adapter will charge faster than a 1-amp adapter. You can check the charging progress by looking at the light indicator on the battery itself.

What happens to my camera when I remove the battery to charge it?

Your camera goes offline and cannot record live video or send motion alerts while the battery is out. You can still view footage that was recorded before you removed the battery. If you need continuous recording, buy a second battery and swap them out.

Why is my Ring battery draining faster than it used to?

Lithium batteries naturally lose capacity over time. After two to three years of use, your battery will hold less charge than when it was new. If your battery is older than two years and drains noticeably faster, replacement is normal maintenance. Ring batteries are available for $30 to $60.

Do I need Ring's official charging dock, or can I use any USB cable?

You can use any standard USB cable and power adapter — the official dock is optional. The dock is a convenience item that keeps your battery in one place and costs around $20 to $30. If you already have USB adapters at home, you do not need to buy it.