The Apple TV remote charges with a USB-C cable, the same kind that charges most phones and tablets

Your Apple TV remote has a built-in battery that lasts weeks between charges. When the battery runs low, you'll see a low-battery notification on your TV screen. To charge it, plug a USB-C to USB-C cable into the port on the bottom of the remote, then connect the other end to any USB power adapter — the one from your phone works fine, or use a computer USB port.

The remote charges while you use it. You don't need to stop watching to top it up. A full charge takes about 30 minutes from empty, though you'll rarely let it get that low if you charge it when you see the warning.

Key Takeaways

  • Apple TV remotes use USB-C charging, and the cable is included in the box when you buy a new remote.
  • The charging port is on the bottom of the remote — look for the small USB-C opening.
  • Any USB power adapter will work, including the one that came with your phone or iPad.
  • A low-battery warning appears on your TV screen before the remote dies, giving you time to charge before you need it.
  • The remote continues to work while charging, so you can keep watching without interruption.

Where the charging port is located

The USB-C port sits on the flat bottom edge of the remote. If you're holding the remote with the buttons facing you, flip it over so you're looking at the back. The small rectangular opening is near the center of that flat bottom edge. It's straightforward to spot once you know what you're looking for.

Don't force the cable in. USB-C connectors are designed to fit snugly but should slide in without resistance. If it feels stuck, you may be angling it slightly — rotate the cable a few degrees and try again.

What power adapter to use

Any USB power adapter with a USB-C port will charge your remote. This includes the charger that came with your iPhone 15 or later, iPad, MacBook, or most Android phones. If you don't have a USB-C adapter at home, a standard 5-watt adapter (the kind that came with older iPhones) works, though it charges more slowly.

You can also plug the USB-C cable into a computer's USB-C port if you're sitting at a desk. The remote will charge from any of these sources — there's no special adapter required.

How long charging takes and when you'll know it's full

A completely dead remote takes about 30 minutes to reach a full charge. Most of the time you'll charge from 20 or 30 percent, which takes 10 to 15 minutes. There's no indicator light on the remote itself, so you won't see a light change color when it's done.

The easiest way to know when charging is complete is to unplug it after 30 minutes, or to check the battery percentage in your Apple TV settings. Go to Settings > AirPlay and HomeKit > Remote, and you'll see the current battery level. Once it shows 100 percent, the remote is fully charged.

Why your remote might not charge

If the remote won't charge, first check that the USB-C cable is fully inserted into the port on the bottom. The connection needs to be snug. Try a different USB-C cable if you have one — the cable itself can fail even if it looks fine.

If a different cable doesn't work, try plugging directly into a wall outlet instead of a computer port. Some computer USB ports don't provide enough power. If the remote still won't charge after trying a wall outlet and a different cable, the battery inside the remote may have failed. Contact Apple Support for a replacement.

How often you'll need to charge

A fully charged Apple TV remote lasts two to three weeks with normal use. If you watch TV for several hours a day, you might charge it every two weeks. If you use it less often, a charge can last a month. The battery degrades slowly over years of use, so an older remote may not hold a charge as long as a new one.

You'll see a low-battery warning on your TV screen when the remote gets to about 10 percent. That warning gives you time to charge before the remote dies. Most people charge when they see the warning rather than waiting for the battery to run out completely.

Frequently Asked Questions

Can I charge my Apple TV remote with a lightning cable?

No. Older Apple TV remotes used a Lightning port, but current models use USB-C. If you have an older remote with a Lightning port, you'll need a Lightning cable. Check the bottom of your remote to see which port you have.

Is it bad to leave the remote plugged in overnight?

No. Modern Apple TV remotes stop charging once the battery reaches 100 percent, so leaving it plugged in won't damage the battery. You can safely charge it overnight or leave it connected to a power adapter for days without harm.

Why does my remote battery drain so fast?

If your remote is losing charge much faster than usual, the battery may be aging. Batteries naturally degrade over two to three years of use. If your remote is newer and draining quickly, try restarting it by holding Menu and Home for five seconds, then release. If that doesn't help, contact Apple Support about a replacement.

Can I use a fast charger or high-wattage adapter?

Yes. The remote will charge safely with any USB-C power adapter, including fast chargers rated for 20 watts or higher. The remote only draws the power it needs, so a high-wattage adapter won't damage it or charge it faster than the remote's internal circuitry allows.