The three ways to charge, depending on your model
Apple makes three different pencil models, and each charges differently. The Apple Pencil (1st generation) charges by sliding onto the iPad's charging port — the same port you use to charge the iPad itself. The Apple Pencil (2nd generation) charges by magnetically attaching to the side of certain iPad Pro models; it draws power wirelessly from the iPad. The Apple Pencil Pro also charges magnetically to iPad Pro models, the same way as the 2nd generation.
You can identify which model you own by looking at the pencil itself. The 1st generation has a removable cap at the top and a flat edge on one side. The 2nd generation and Pro are both rounded all the way around with no removable cap. If you're unsure, go to Settings on your iPad, tap About, and scroll down to find "Stylus" listed with the model name.
Knowing your model matters because using the wrong charging method won't damage the pencil, but it won't charge it either — and you'll waste time wondering why nothing is happening.
Key Takeaways
- Apple Pencil 1st generation slides onto your iPad's charging port and takes about 15 minutes to charge fully.
- Apple Pencil 2nd generation and Pro attach magnetically to the side of compatible iPad Pro models and charge wirelessly while attached.
- A pencil that won't charge is usually attached to the wrong side of the iPad or not making full contact with the magnetic strip.
- Battery life on a fully charged pencil ranges from 12 to 20 hours of use, depending on the model.
Charging the 1st generation Apple Pencil
Remove the cap from the top of the pencil by twisting it counterclockwise. Underneath is a Lightning connector — the same type of port on older iPad models. Slide this connector straight into your iPad's charging port at the bottom (or side, depending on the iPad model). The pencil will sit at an angle sticking out from the iPad.
You'll see a small lightning bolt icon appear on the iPad screen near the top left, confirming the pencil is charging. A fully drained pencil takes about 15 minutes to charge to 100 percent. You can check the battery level by swiping down from the top right of your iPad to open Control Center; the pencil's battery percentage appears there.
While charging this way, you can still use your iPad normally — the pencil doesn't need to be removed. However, the angle can feel awkward if you're holding the iPad in your lap. Many people charge it while the iPad sits on a table or stand.
Charging the 2nd generation and Pro Apple Pencil
Hold the pencil parallel to the right edge of your iPad Pro (the edge without buttons). You'll feel a magnetic pull as you bring the pencil close — let it snap into place. The pencil should sit flush against the side of the iPad with no gap. This is the only position where charging happens.
Once attached, look at the top left of your iPad screen. A battery icon for the pencil appears in the status bar. If you don't see it, the pencil isn't making proper contact. Try removing it and reattaching it, making sure it's centered on the magnetic strip that runs along the edge.
Charging happens automatically whenever the pencil is attached, whether your iPad is plugged in or running on battery. A fully drained pencil reaches 100 percent in about 15 to 20 minutes. You can leave the pencil attached indefinitely — it won't overcharge.
What to do if the pencil won't charge
If you have a 1st generation pencil and it's not charging, first check that the cap is fully removed and the Lightning connector is clean. Lint or dust in the port blocks the connection. Gently wipe the connector with a dry cloth, then try again. If the iPad's charging port itself is dirty, use a flashlight to look inside and carefully remove any debris with a wooden toothpick — never use metal.
If you have a 2nd or 3rd generation pencil, the most common problem is attachment on the wrong edge. These pencils only charge on the long edge that has the magnetic strip — usually the right side of the iPad in portrait orientation. Try the opposite edge or rotate the iPad 180 degrees and try again. If the pencil still won't attach, the magnetic strip may be damaged, which requires service.
For any model, check the battery status in Settings. Go to Settings, then Bluetooth, and look for your pencil in the list of connected devices. If the pencil doesn't appear there at all, it's not paired to the iPad. Unpair it by tapping the information icon next to its name, then tap Forget This Device. Turn the pencil off and on again (if it has a power button), then pair it fresh by holding it near the iPad.
How long a full charge lasts
Battery life depends on how you use the pencil and which model you own. The 1st generation pencil runs for about 12 hours of continuous use on a full charge. The 2nd generation and Pro both last around 12 to 20 hours, depending on whether you're using pressure sensitivity and tilt features constantly or just writing lightly.
In practice, most people charge their pencil once or twice a week. If you use it heavily for drawing or note-taking every day, you might charge it more often. The pencil will warn you when the battery is low — you'll see a low battery notification on your iPad, usually when you have 10 to 15 minutes of use left.
Charging while traveling
If you have a 1st generation pencil, you need access to an iPad with a Lightning port to charge it. You can't charge it with a standard USB cable or wall adapter. If you're traveling without your iPad, bring a small portable battery pack with a Lightning port, or plan to charge the pencil when you reach your destination.
With a 2nd or 3rd generation pencil, you only need your iPad Pro nearby. As long as the iPad has battery, the pencil can charge. If both are drained, charge the iPad first, then attach the pencil to charge it. Many people keep the pencil attached to the iPad while traveling so it's always ready to use.
Frequently Asked Questions
Can I charge my Apple Pencil with a regular USB cable?
No. The 1st generation requires the iPad's Lightning port. The 2nd generation and Pro charge only through magnetic attachment to compatible iPad Pro models. There is no USB option for any Apple Pencil model.
Will my pencil overcharge if I leave it attached overnight?
No. The 2nd generation and Pro stop charging once they reach 100 percent and won't overcharge no matter how long they stay attached. The 1st generation also has built-in protection against overcharging.
Why does my pencil charge slowly?
If you're using the 1st generation, slow charging usually means the Lightning connector is dirty or the iPad's port isn't making good contact. Clean both with a dry cloth. For 2nd and 3rd generation pencils, slow charging means the magnetic attachment isn't find — remove and reattach the pencil, making sure it sits flush against the edge.
Can I use my Apple Pencil while it's charging?
Yes, with the 1st generation you can use it while it's plugged into the iPad. With the 2nd and 3rd generation, you can detach the pencil and use it when ready — it doesn't need to stay attached to charge, though it will only charge while attached.
How do I know if my pencil is actually charging?
On any model, look at the battery icon in your iPad's status bar or Control Center. You should see the pencil's battery percentage appear there. If it doesn't show up, the pencil isn't paired or isn't making a proper connection. For the 1st generation, you'll also see a lightning bolt icon appear on screen when charging starts.