Charging your Ring doorbell depends on which model you own
Ring makes two types of doorbells: wired models that draw power from your home's existing doorbell circuit, and battery-powered models that you charge like a phone. If your doorbell is hardwired into your home's electrical system, it charges continuously and you will never need to plug it in. If it runs on a removable battery, you take the battery out and charge it separately using a USB cable.
The charging method matters because it changes how often you interact with the device. Wired doorbells need no action from you. Battery models need a charge every few months, depending on how many people ring it and how cold it is outside. Knowing which type you have takes 30 seconds and determines everything that follows.
Key Takeaways
- Wired Ring doorbells charge automatically through your home's existing doorbell wiring and never need manual charging.
- Battery-powered Ring doorbells have a removable battery pack that you charge with a USB cable, typically every three to six months.
- Cold weather drains batteries faster, so you may need to charge more often in winter.
- The Ring app shows your battery percentage, so you can monitor when charging is needed without guessing.
- A full charge from empty takes two to four hours depending on the model and charger you use.
Identify whether your doorbell is wired or battery-powered
Look at the back of your Ring doorbell. If you see two small metal screws with wires attached, your doorbell is wired into your home's electrical system. These wires connect to your existing doorbell transformer, which is usually in a basement, attic, or utility closet. Wired models never need charging because electricity flows through those wires constantly.
If the back of your doorbell is smooth and you see no wires, you have a battery-powered model. Battery-powered Ring doorbells include the Ring Video Doorbell (2nd Gen and newer), Ring Video Doorbell Plus, and Ring Video Doorbell Pro. These models have a removable battery pack inside that slides out from the bottom or back of the device.
You can also check the Ring app. Open the app, tap the three horizontal lines in the top left, select your doorbell, and look for "Device Health." If it shows a battery percentage, your doorbell runs on batteries. If it shows "Powered" or "Wired," your doorbell is hardwired.
Remove and charge the battery pack on battery-powered models
For battery-powered Ring doorbells, locate the battery pack. On most models, it slides out from the bottom of the device. Grip the doorbell firmly with one hand and use your other hand to pull the battery pack straight down. It will slide out smoothly — do not twist or force it. The battery pack is a rectangular block about the size of a deck of cards, usually white or black.
Once removed, locate the USB charging port on the battery pack. This is a small rectangular opening, usually on one of the flat sides. Plug a standard USB-C or Micro-USB cable into this port (the type depends on your Ring model — check the manual or the port itself to see which one fits). Plug the other end of the cable into a USB power adapter, then plug the adapter into a wall outlet.
The battery will charge while you are away from the doorbell. A full charge from completely empty takes two to four hours. Most USB power adapters work, including the ones that come with phones and tablets. You do not need a special Ring charger.
Monitor battery health in the Ring app
Open the Ring app and tap the three horizontal lines in the top left corner. Select your doorbell from the list of devices. Tap "Device Health" to see the current battery percentage. This percentage updates throughout the day as the battery drains from motion alerts, video recording, and people pressing the doorbell button.
Ring recommends charging when the battery drops below 20 percent. At that level, the doorbell will still work, but it may not record video during every motion event or may take longer to respond when someone presses the button. If the battery reaches 0 percent, the doorbell stops working entirely until you charge it again.
Battery drain speed depends on several factors. Busy locations where many people walk past or press the button drain the battery faster. Cold weather also drains batteries more quickly — a battery that lasts five months in summer might last three months in winter. If you notice the battery dropping faster than expected, check your motion detection settings in the app. Lowering the sensitivity or adjusting the motion zones can extend battery life between charges.
Reinstall the battery pack after charging
Once the battery pack is fully charged, slide it back into the doorbell. Align the pack with the slot at the bottom or back of the doorbell (depending on your model) and push it straight in until you hear or feel a click. The pack should sit flush with the doorbell body with no gaps.
Open the Ring app and check "Device Health" again. The battery percentage should now show 100 percent or close to it. If it shows a lower percentage, the battery may not be fully seated. Remove it and reinstall it, making sure it clicks into place.
Your doorbell is now ready to use. It will continue recording and sending alerts until the battery drops below 20 percent again, at which point the app will notify you to charge it.
What to do if your wired doorbell is not charging
If you have a wired Ring doorbell and the app shows it is not powered, the problem is usually a tripped breaker or a disconnected wire. First, locate your home's electrical panel (usually in the basement or garage) and look for a breaker labeled "Doorbell" or "Front Door." If it is switched to the off position, flip it back on. Wait 30 seconds and check the app again.
If the breaker is already on, the issue may be a loose wire connection at the doorbell transformer. The transformer is a small box, usually in the basement or attic, with two wires running to it. If you are comfortable working with electrical connections, turn off the breaker, check that both wires are firmly attached to the transformer screws, and turn the breaker back on. If you are not comfortable doing this, contact a licensed electrician.
If the app still shows no power after checking the breaker and wires, the transformer itself may have failed. This is rare but does happen. A replacement transformer costs between $15 and $50 and can be installed by an electrician in under an hour.
Extend battery life between charges
Adjust motion detection settings to reduce how often the doorbell wakes up and records. In the Ring app, go to your doorbell settings and tap "Motion Settings." Lower the motion sensitivity or create motion zones that exclude areas like the street or driveway where motion happens constantly. This prevents the doorbell from recording every passing car or pedestrian.
Disable video recording for motion events if you only need notifications that someone is at the door. In "Motion Settings," toggle off "Record Video on Motion" if that option is available for your model. The doorbell will still send you a notification, but it will not use battery power to record video.
Keep the doorbell out of direct sunlight if possible. Extreme heat can reduce battery efficiency. If your doorbell is in a very hot location, consider installing a small awning or shade to keep it cooler during the day.
Frequently Asked Questions
How often do I need to charge a battery-powered Ring doorbell?
Most battery-powered Ring doorbells need charging every three to six months, depending on how busy your location is and the weather. A doorbell in a quiet area with few motion events might go six months between charges. A doorbell in a busy location or during cold weather might need charging every two to three months. The Ring app will notify you when the battery drops below 20 percent.
Can I use any USB cable to charge my Ring doorbell?
Yes, any standard USB cable that fits your Ring model's charging port will work. Most newer Ring doorbells use USB-C, while older models use Micro-USB. Check the port on your battery pack to see which type you need. You can use any USB power adapter, including the ones that come with phones and tablets.
What happens if my Ring doorbell battery dies completely?
The doorbell will stop working until you charge it. It will not record video, send alerts, or respond to button presses. There is no permanent damage — straightforward remove the battery pack, charge it fully, and reinstall it. The doorbell will resume normal operation when ready.
Why is my battery draining faster than it used to?
Battery drain speed increases in cold weather, when motion detection is set to high sensitivity, or when your location has frequent motion events. Check your motion settings in the Ring app and lower the sensitivity if needed. If the weather has turned cold, expect the battery to drain faster until temperatures warm up again.
Do I need to remove the battery to charge it, or can I charge it while it is installed?
You must remove the battery pack to charge it. Ring doorbells do not charge while installed in the doorbell. This design prevents accidental water damage and makes it easier to charge indoors where you have access to power outlets.