Charging time depends on which Apple Pencil model you own
An Apple Pencil charges fully in 15 to 30 minutes, depending on the model. The original Apple Pencil (1st generation) takes about 15 minutes to charge from empty to full. The Apple Pencil Pro and Apple Pencil (2nd generation) both take roughly 30 minutes. If you charge from completely dead, expect the longer end of that range; if you're topping up from 50 percent battery, you'll finish faster.
Charging speed also depends on what power source you use. A standard USB power adapter works, but a higher-wattage charger (like the 20W or 30W adapters that come with newer iPads) will charge slightly faster than a 5W phone charger. The difference is small — usually just a few minutes — but it matters if you need your pencil ready quickly.
You don't have to wait for a full charge to use your pencil. After just 15 seconds of charging, the Apple Pencil Pro and 2nd generation have enough battery for about 30 minutes of drawing. This is useful if you forgot to charge overnight and need to start working right away.
Key Takeaways
- The original Apple Pencil charges in about 15 minutes; the Pro and 2nd generation take about 30 minutes.
- A higher-wattage charger (20W or 30W) charges slightly faster than a standard 5W adapter.
- You can use your pencil after just 15 seconds of charging, though the battery will be low.
- Charging method varies by model: the original uses a Lightning connector, the 2nd generation charges wirelessly on an iPad, and the Pro charges in its case.
How to charge the original Apple Pencil
The original Apple Pencil charges through a Lightning connector that slides out from the top of the pencil. Plug the connector into any USB power adapter — the one that came with your iPad, iPhone, or a standard USB-A charger all work. The pencil will charge while you hold it, or you can rest it on a table with the connector plugged in.
This model has no on-off switch and no battery indicator on the pencil itself. To check the battery, you have to look at your iPad's lock screen or open the Bluetooth settings. The pencil will show a low-battery warning when it drops below 20 percent, giving you time to plug it in before it dies completely.
How to charge the Apple Pencil (2nd generation)
The 2nd generation Apple Pencil charges wirelessly by attaching magnetically to the side of compatible iPads. When you snap it onto the iPad, charging starts automatically — you don't plug anything in. It takes about 30 minutes to charge fully this way.
The iPad itself must be plugged in or have enough battery to share power with the pencil. If your iPad is low on battery, charging the pencil will be slower or may not happen at all. You can see the pencil's battery percentage in the iPad's lock screen or in the Bluetooth settings.
This pencil is compatible with iPad Pro (3rd generation and later), iPad Air (3rd generation and later), and iPad (7th generation and later). Check your iPad model before buying, because the 2nd generation will not attach to older models.
How to charge the Apple Pencil Pro
The Apple Pencil Pro charges inside its charging case, which connects to power via USB-C. Place the pencil in the case, close the lid, and plug the case into any USB-C power adapter. The pencil charges fully in about 30 minutes.
The case itself holds enough battery to charge the pencil multiple times without being plugged in. A full case can charge the pencil roughly four times before the case needs power. This makes the Pro useful if you travel or work away from outlets for long periods.
The Apple Pencil Pro works with iPad Pro (7th generation and later) and iPad Air (6th generation and later). It is not compatible with older iPad models or with iPhones.
What to do if your Apple Pencil won't charge
If your pencil isn't charging, start by checking the connection. For the original model, make sure the Lightning connector is clean and fully inserted into the charger. For the 2nd generation, remove the pencil from the iPad and reattach it firmly — sometimes a loose magnetic connection prevents charging from starting. For the Pro, open the case and reseat the pencil inside, then close the lid.
If the pencil still won't charge, try a different power adapter. A faulty charger is the most common reason charging fails. Use a higher-wattage adapter if you have one available — at least 20W — because some low-power chargers don't provide enough current to start the charging process.
Restart your iPad by holding the power button and swiping to shut down, then turning it back on. This clears temporary software issues that sometimes block charging. If the pencil still won't charge after these steps, the battery itself may be failing, and you may need to contact Apple Support or visit an Apple Store.
How battery life works between charges
Once fully charged, an Apple Pencil lasts a long time before needing to plug in again. The original model runs for about 12 hours of continuous use. The 2nd generation and Pro both last roughly 12 hours as well, though real-world use is usually shorter because most people don't draw continuously.
Battery drain depends on how much pressure you explore while drawing and whether you use features like tilt sensitivity or pressure sensing. Heavy use with all features on will drain the battery faster than light sketching. If you use your pencil for a few hours a day, you'll typically charge it once or twice a week.
The pencil will warn you when the battery is low. You'll see a notification on your iPad, and the pencil's performance may slow slightly. At that point, you have time to finish what you're working on before plugging in.
Frequently Asked Questions
Can I use my Apple Pencil while it's charging?
Yes, with the original model and the Pro. The original pencil works fine while plugged in, and the Pro works while sitting in its charging case. The 2nd generation cannot be used while charging because it must be attached to the iPad to charge, and the magnetic connection prevents it from being held at a usable angle.
Does it hurt the battery to leave my Apple Pencil plugged in overnight?
No. Apple Pencils have built-in charging controllers that stop charging once the battery is full, so leaving it plugged in won't damage the battery or reduce its lifespan. However, for the 2nd generation, leaving it attached to your iPad overnight will drain your iPad's battery slightly.
Why is my Apple Pencil charging slowly?
The most common reason is a low-power charger. Use a 20W or 30W USB power adapter instead of a 5W phone charger. For the 2nd generation, make sure your iPad has enough battery to share — if the iPad is below 20 percent, charging the pencil will be very slow or won't happen. For the Pro, check that the pencil is fully seated in the case and the case is plugged in securely.
What's the difference between the three Apple Pencil models?
The original charges via Lightning in 15 minutes and costs the least. The 2nd generation charges wirelessly on your iPad in 30 minutes and has a flat edge to prevent rolling. The Pro charges in a case in 30 minutes, has a squeeze gesture, and includes a Find My tracker. Choose based on your iPad model and budget — not all iPads work with all pencils.