Charging time depends on your hoverboard's battery size and charger type

Most hoverboards take between two and four hours to charge fully from completely empty, though some larger models can take up to six hours. The exact time depends on two things: the capacity of your battery (measured in watt-hours) and the power output of your charger (measured in watts). A smaller hoverboard with a 36-volt, 4.4 amp-hour battery and a standard charger might finish in two hours, while a larger 10 amp-hour battery with the same charger could take five or six.

The charger that came with your hoverboard is designed specifically for that model's battery, so using the original charger gives you the most reliable charging time. Third-party chargers marketed as faster may damage the battery or create safety risks, even if they promise shorter charge times.

Key Takeaways

  • Standard hoverboard charging takes two to four hours for most models, with larger batteries requiring up to six hours.
  • Charging time increases when the battery is cold, when you use the hoverboard while charging, or when the charger is worn out.
  • The original charger that shipped with your hoverboard is the safest choice and gives you the most predictable charge time.
  • Leaving a hoverboard plugged in after it reaches full charge degrades the battery faster than unplugging it promptly.

What slows down charging time

Cold batteries charge more slowly than warm ones. If your hoverboard has been sitting in a garage or car in winter, expect charging to take 20 to 30 percent longer than the standard time. Letting the hoverboard warm to room temperature before plugging it in speeds up the process.

Using the hoverboard while it charges also extends charging time significantly. The battery is working to power the motor at the same time the charger is trying to refill it, so the net charge going into the battery is much slower. Avoid riding while charging, even for short trips.

A charger that is worn out or damaged will charge more slowly than a new one. If your hoverboard used to charge in two hours but now takes four, the charger may be failing. Chargers can wear out from being bent, stepped on, or exposed to moisture.

How to know when charging is complete

Most hoverboards have a light on the charger itself that changes color when the battery is full. A red or amber light usually means charging is in progress, while a green light means the battery has reached full capacity. Check your hoverboard's manual for the specific light colors on your model, since not all manufacturers use the same system.

Some hoverboards also have a light on the board itself that shows battery level. This light may not turn off when charging is complete, so rely on the charger's light as your main indicator. Once the charger light turns green, unplug it within a few minutes. Leaving the charger connected after the battery is full causes the battery to degrade faster over time.

Charging time for different battery sizes

Hoverboards come in several common battery sizes, and each charges at a different rate. A small hoverboard with a 36-volt, 4.4 amp-hour battery typically charges in two to three hours. A mid-size model with a 36-volt, 6 amp-hour battery usually takes three to four hours. Larger models with 10 amp-hour batteries or higher can take five to six hours or longer.

The wattage of your charger also matters. A 42-watt charger (common on smaller boards) will charge slower than a 58-watt charger (common on larger boards). If you know your battery's amp-hour rating and your charger's wattage, you can estimate charging time: divide the battery's watt-hours by the charger's watts, then add 10 to 15 percent for inefficiency. A 158-watt-hour battery with a 42-watt charger would take roughly 4 hours.

Why you should not leave a hoverboard charging overnight

Lithium-ion batteries, which power most hoverboards, degrade when they stay at full charge for extended periods. Leaving your hoverboard plugged in overnight or for several hours after it reaches full capacity causes the battery to lose capacity faster than normal. Over months, this can reduce how far the hoverboard travels on a single charge.

Overcharging also creates a small fire risk, though modern hoverboards have safety circuits designed to prevent this. The safest practice is to unplug the charger as soon as the light indicates the battery is full. If you charge overnight out of convenience, set a phone reminder to unplug the hoverboard within 30 minutes of the charger light turning green.

Charging a hoverboard from a partially empty battery

You do not have to wait until the battery is completely empty to charge. Plugging in a hoverboard when it still has 20 or 30 percent charge remaining will take proportionally less time — roughly 90 minutes to two hours instead of the full three to four hours. Charging from a partial charge is actually better for the battery's long-term health than always draining it completely before recharging.

Charging from a very low battery (below 5 percent) may take slightly longer than charging from 20 percent, because the battery management system sometimes limits charging speed when the battery is critically low to protect the cells. Once the battery reaches about 20 percent, the charger can operate at full power again.

What to do if charging takes longer than expected

If your hoverboard is taking significantly longer to charge than it did when new, check three things first. Make sure you are using the original charger, not a replacement or third-party model. Inspect the charging cable for damage, kinks, or bent connectors. If the cable looks damaged, the charger may not be delivering full power.

Next, let the hoverboard sit at room temperature for 30 minutes if it has been in a cold environment. Cold batteries charge slowly, and warming up naturally can restore normal charging speed. If the hoverboard still charges slowly after warming up and you have confirmed the charger is original and undamaged, the battery itself may be failing and may need replacement.

Frequently Asked Questions

Can I use a phone charger or laptop charger on my hoverboard?

No. Phone and laptop chargers have different voltage and amperage ratings than hoverboard chargers. Using the wrong charger can damage the battery, cause it to charge incorrectly, or create a fire hazard. Always use the charger that came with your hoverboard.

Does it matter if I charge my hoverboard every day?

Charging daily is fine if you use the hoverboard daily. Lithium-ion batteries actually prefer regular partial charges over deep discharges followed by full charges. The key is unplugging the charger once the battery reaches full capacity, not leaving it plugged in for hours afterward.

Why does my hoverboard charge faster sometimes than other times?

Temperature is the main reason. A warm hoverboard charges faster than a cold one. If you charge after riding (when the battery is warm), it will charge faster than if you charge after the board has been sitting in a cold garage. Room temperature charging is most consistent.

Is it safe to ride a hoverboard while it is charging?

It is not recommended. Riding while charging slows the charge time significantly and puts extra stress on the battery. It also creates a tripping hazard with the charging cable. Charge the hoverboard while it is stationary and unridden.

What should I do if the charger gets hot while charging?

A charger that becomes too hot to touch is a sign of a problem. Unplug it when ready and stop using it. A charger that is slightly warm is normal, but one that is hot enough to be uncomfortable indicates a failing component. Contact the manufacturer or replace the charger with an original part.