The charging method depends on which Apple Pencil model you own
Apple makes three different Pencil models, and each one charges differently. The original Apple Pencil charges by plugging into your iPad's Lightning port. Apple Pencil (2nd generation) charges wirelessly by attaching magnetically to the side of certain iPad Pro and iPad Air models. Apple Pencil Pro, released in 2024, also charges magnetically but works with a different set of iPad models. Knowing which version you have determines how you'll charge it and how long it takes.
You can find your model by going to Settings on your iPad, then General, then About. Look for "Apple Pencil" in the list — it will show which generation you own. The physical appearance also differs: the original has a removable cap with a Lightning connector inside, the 2nd generation is flat on one side, and the Pro model is slightly thicker with a squeeze sensor.
Key Takeaways
- Original Apple Pencil charges by removing the cap and plugging the Lightning connector into your iPad's port, taking about 15 minutes for a full charge.
- Apple Pencil (2nd generation) and Apple Pencil Pro charge by snapping magnetically to the side of compatible iPad models, with no cable needed.
- Magnetic charging happens automatically when the Pencil is attached to your iPad — you do not need to press anything or wait for a confirmation.
- A fully charged Pencil lasts 12 to 20 hours of use depending on the model, and you can check battery percentage in your iPad's settings or Control Center.
Charging the original Apple Pencil with a Lightning cable
The original Apple Pencil has a removable cap on the end. Twist the cap counterclockwise to unscrew it, and you'll see a Lightning connector inside. Plug this connector directly into the Lightning port on the bottom of your iPad. The Pencil will begin charging when ready — you'll see a small lightning bolt icon next to the battery percentage in the top-right corner of your screen.
A full charge takes about 15 minutes and gives you roughly 12 hours of use. If you only need a quick charge, 30 seconds of connection gives you about 30 minutes of use. After charging, twist the cap back on clockwise until it's snug. Do not force it — the cap should turn smoothly and stop on its own when seated properly.
The original Pencil does not have a battery indicator on the device itself, so you'll need to check your iPad to see how much charge remains. Open Settings, go to Bluetooth, find Apple Pencil in the list, and look at the percentage shown next to it. You can also add a battery widget to your home screen to check it without opening Settings.
Charging Apple Pencil (2nd generation) magnetically
The 2nd generation Pencil charges by attaching to the side of compatible iPad models. Hold the Pencil near the flat edge of your iPad Pro (3rd generation or later) or iPad Air (4th generation or later), and it will snap into place magnetically. The Pencil should be parallel to the edge of the iPad — if it's at an angle, it won't attach properly.
Once attached, charging begins automatically. You'll see a small battery icon appear on your screen showing the charge percentage. There's no button to press, no cable to plug in, and no confirmation needed. The Pencil stays attached while charging and while you're not using it, so it's always ready when you pick up your iPad.
A full charge takes about 2 hours and provides roughly 12 hours of use. The Pencil will stay magnetically attached even if the iPad is turned off or in sleep mode. If you want to check the battery without looking at your screen, you can add the battery widget to your home screen or swipe down from the top-right corner to open Control Center and look at the battery percentage there.
Charging Apple Pencil Pro magnetically
Apple Pencil Pro charges the same way as the 2nd generation — by snapping magnetically to the side of your iPad. It works with iPad Pro (7th generation or later) and iPad Air (6th generation or later). Hold the Pencil parallel to the flat edge of your iPad, and it will attach magnetically. Charging starts when ready with no additional steps.
The Pro model charges fully in about 2 hours and lasts roughly 20 hours of use, which is longer than earlier models. You can check the battery percentage the same way: look at the battery icon on your screen, add a battery widget to your home screen, or open Control Center. The Pencil stays attached to your iPad while charging and while stored, keeping it always charged and ready to use.
What to do if your Pencil won't charge
If your original Apple Pencil won't charge, first check that the Lightning connector inside the cap is clean. Dirt or lint can prevent a good connection. Gently wipe the connector with a dry cloth, then try plugging it in again. Make sure you're using an iPad with a Lightning port — newer iPad models with USB-C ports cannot charge the original Pencil.
For 2nd generation and Pro models, make sure your iPad model is compatible. The Pencil must attach to an iPad Pro (3rd generation or later) or iPad Air (4th generation or later) for 2nd generation, or iPad Pro (7th generation or later) and iPad Air (6th generation or later) for Pro. If your iPad is older, it won't have the magnetic charging feature. Also check that the flat edge of your iPad is clean — dust or a thick case can prevent the magnet from working properly.
If the Pencil still won't charge after cleaning, try restarting your iPad. Hold the top and bottom buttons together until you see the power-off slider, then slide to turn off. Wait 10 seconds, then press the top button again to turn it back on. After restarting, try charging again. If it still doesn't work, the battery inside the Pencil may have failed and the device may need to be replaced.
How to check your Pencil's battery level
The quickest way to check battery percentage is to open Control Center on your iPad. Swipe down from the top-right corner of the screen, and you'll see a battery section showing your iPad's battery and any connected devices, including your Apple Pencil. The percentage appears next to the Pencil's name.
You can also check in Settings. Go to Settings, then Bluetooth, and find Apple Pencil in the list of connected devices. The percentage shows next to it. If you want to see the battery without opening Settings or Control Center every time, add the battery widget to your home screen. Swipe right from your home screen to open the widget panel, tap the plus button, search for "Batteries," and add the widget. It will show your Pencil's battery percentage along with your iPad and any other connected devices.
Frequently Asked Questions
Can I charge my Apple Pencil with a regular USB-C cable?
No. The original Apple Pencil only works with the Lightning connector inside its cap. Newer iPad models with USB-C ports cannot charge the original Pencil. If you have a newer iPad with USB-C, you need Apple Pencil (2nd generation) or Pro, which charge magnetically instead.
How long does it take to fully charge an Apple Pencil?
The original Apple Pencil takes about 15 minutes to fully charge when plugged into your iPad's Lightning port. Apple Pencil (2nd generation) and Pro take about 2 hours to fully charge magnetically. A 30-second charge on the original gives you roughly 30 minutes of use if you're in a hurry.
Can I use my Apple Pencil while it's charging?
Yes. With the original Pencil, you can detach it from your iPad and use it when ready — it doesn't need to finish charging. With 2nd generation and Pro, you can detach the Pencil from the side of your iPad and use it right away, though it will stop charging once you remove it.
What happens if I leave my Apple Pencil plugged in or attached overnight?
It's safe to leave your Pencil charging overnight. All Apple Pencil models have built-in protection that stops charging once the battery is full, so leaving it connected won't damage the battery or cause overcharging. The Pencil will straightforward stay at 100% until you use it.
Why is my Apple Pencil battery draining quickly?
Heavy use drains the battery faster — if you're drawing or writing for hours without a break, you'll notice the percentage drop. Older Pencils may also have batteries that don't hold a charge as long as they did when new. If your Pencil is several years old and the battery drains in just a few hours of light use, the internal battery may be wearing out and the device may need replacement.