Apple mice charge through a Lightning or USB-C port on the bottom
The charging method depends on which Apple mouse you own. The Magic Mouse 2 uses a Lightning cable (the same connector as older iPhones). The Magic Mouse with USB-C, released in 2024, uses USB-C instead. Both charge from the bottom of the mouse, and you'll need the cable that came in the box — Apple does not include a power adapter, only the cable itself.
The mouse charges from any USB power source: a computer, a wall adapter, a power bank, or even a car charger. You do not need Apple's branded adapter. Any standard USB-A to Lightning cable works for the Magic Mouse 2, and any USB-C cable works for the USB-C model. The charging port is recessed slightly into the bottom, so the cable sits flush when plugged in.
Key Takeaways
- Magic Mouse 2 uses Lightning; the newer Magic Mouse uses USB-C — check the bottom of your mouse to see which port you have.
- The mouse charges from the bottom while sitting upside down, and you can still use it while plugged in.
- A full charge takes about two hours and lasts roughly one month of typical use.
- The battery indicator appears in the menu bar on Mac, and you can also check it in System Settings under Bluetooth.
Where to find the charging port and how to plug it in
Flip the mouse upside down and look at the center of the bottom surface. You'll see a small rectangular port — Lightning on older models, USB-C on newer ones. The port is slightly recessed so the cable connector sits snugly without sticking out. Plug the cable in firmly; you should feel a small click or resistance.
Once plugged in, the mouse can stay on your desk and you can continue using it. The cable is short (about 2 feet), so you'll need the power source close by. Some people leave the mouse plugged in while working; others charge it overnight. There's no harm in either approach — the battery stops charging once full and won't overcharge.
How long charging takes and how long the battery lasts
A Magic Mouse typically charges from empty to full in about two hours. If you charge it overnight, it will be ready by morning. The battery itself lasts roughly one month under normal use — that means a few hours of work per day, five days a week. Heavy users may see three weeks; light users may stretch it to six weeks.
You don't have to wait for the battery to drain completely before charging. Plugging it in at 20 percent is fine and won't shorten the battery's lifespan. Many people charge their mouse once a week as a routine, the same way they might charge a phone.
Checking the battery level on your Mac
The easiest way to see how much charge remains is to look at the menu bar at the top of your screen. Click the Bluetooth icon (it looks like a fan or radio waves) and your connected devices appear in a dropdown menu. Next to your Magic Mouse name, you'll see a battery percentage. This updates in real time as you use the mouse.
You can also check battery level in System Settings. Go to System Settings > Bluetooth, find your Magic Mouse in the list of devices, and the battery percentage appears next to it. If the battery is below 10 percent, the menu bar icon will show a low-battery warning in red or yellow, depending on your Mac's settings.
What to do if your mouse won't charge
First, check that you're using the correct cable for your mouse model. A Lightning cable won't work on a USB-C mouse, and vice versa. If you're using the right cable, try a different USB power source — sometimes a computer's USB port doesn't deliver enough power. A wall adapter or power bank usually works better.
Clean the charging port on the bottom of the mouse with a dry cloth or a cotton swab. Dust or lint inside the port can prevent the cable from making good contact. If the cable itself is damaged (frayed, bent, or cracked), replace it with a new one. If none of these steps work and the mouse still won't charge after 30 minutes, the battery may be faulty — contact Apple Support for a replacement.
Extending battery life between charges
The biggest factor in how long your mouse battery lasts is how often you use it. If you work eight hours a day, five days a week, you'll charge roughly once a week. If you use the mouse only a few hours a day, you might charge it every two weeks.
You can't turn off the Magic Mouse to save power — it's always on and always connected to your Mac. However, if you're away from your desk for more than a few days, you can disconnect it from Bluetooth in System Settings. This stops the mouse from searching for your Mac and drains the battery much more slowly. Reconnect it when you return by going to System Settings > Bluetooth and clicking "Connect" next to your mouse.
Frequently Asked Questions
Can I use my Magic Mouse while it's charging?
Yes. The mouse works normally while plugged in. Many people charge their mouse while they work, especially if they're doing a full day of use and the battery is low. There's no performance difference between a plugged-in and unplugged mouse.
What if I lost the charging cable that came with my mouse?
You can buy a replacement cable separately. For Magic Mouse 2, any USB-A to Lightning cable works — these are inexpensive and widely available. For the USB-C model, any USB-C cable works. You don't need an Apple-branded cable; third-party cables are fine as long as they're the correct connector type.
Does the Magic Mouse battery degrade over time?
Yes, like all rechargeable batteries, the Magic Mouse battery gradually loses capacity after hundreds of charge cycles. After two to three years of regular use, you might notice the battery doesn't last quite as long as it did when new. This is normal and not a sign of a problem.
Can I charge the Magic Mouse with a wireless charging pad?
No. The Magic Mouse only charges through the wired Lightning or USB-C cable. It does not support wireless charging. You must plug in the cable directly to the port on the bottom of the mouse.